600Gal + Much More: Final Round

Talk about you and your tank/equipment

Posts: 122
Joined: Thu Nov 24, 2011 9:50 pm
Location: Golden, CO
PostPosted: Wed Dec 20, 2017 11:17 am
Hey guys, It's been a while since I have been around. I lost my 360gal system during my move and have been focusing on other aspects of my life. Fast forward a few years and here I am again. Instead of packing up and moving on I went all out. The new home was purchased with the intent on going big and I hope not to disappoint.

The display is a 96x48x33H 600Gal commercial glass tank made my Miracles Aquariums. It sits in a recreation room that measures 30x20ft and has a decorative concrete floor. The system itself is a work in progress but is approaching fully operational after 1.5 years of work. The system is plumbed into the basement where it has a dedicated filtration, propagation, and quarantine room. This room consists of...

Tied to main display
100Gal Custom AGE acrylic sump
100Gal 48x48x10" Coral Flat
50Gal 48x20x10" Coral Flat
78" Tall RK2 Commercial Skimmer
Masterflex fed Calcium Reactor
Masterflex dosing pump for Vodka Dosing
Aquamedic Kalk reactor
Vertex Media Reactor

Independent Systems
BTA Propagation System consisting of 6 20Gal All-in-One systems
75Gal QT All-in-One
60Gal QT All-in-One

Support Equipment
Shop Sink - Converts to fragging station
200GPD 9 Stage RODI System
200Gal RODI Storage Tank w/ Closed Loop Dionization
200Gal Saltwater Storage Tank
HRV - Heat Recovery Ventilator - Exchanges house air 3x per day to control humidity but retain heat.
3x 20a Circuits
1x 15a Circuit
Shelving for storage
Storage for 8x boxes of salt

Plans for my ReefAngel
The flexibility of the system is what drew me into the RA world in the first place. I've had the original, the Plus, and will migrate to the Star before this project is complete. I will be monitoring temperature of the room as well as the 11 tanks. ORP, Salinity, PH, and RF for Ecotech Marine Vortechs will be utilized on the 600gal and two coral flats. Lighting and heater control will also be done through the RA.

I would like to mount a tablet to the wall of the room to have the portal displayed. The hope is that I will be able to customize a screen to provide me with critical data from all systems as well as logs to help spot any abnormalities. I am sure other features will be implemented along the way as the system matures.

I'll post some pictures in this thread as time allows and will link the Webcam once it is setup. If you want to take a look at the build thread it can be found on RC. http://www.reefcentral.com/forums/showt ... ?t=2578543

Thanks for taking a look, feels good to be back 8-)
Image
User avatar
Posts: 2743
Joined: Fri Mar 18, 2011 6:20 pm
Location: Illinois
PostPosted: Wed Dec 20, 2017 1:32 pm
awesome! I haven't read the thread yet but sounds awesome.
everything you want to do should be possible. the tablet app you mentioned could be possible with the Star and Android. an ios tablet app would be limited to the uapp.

Sent from my XT1585 using Tapatalk

Posts: 64
Joined: Wed Apr 27, 2011 9:08 am
PostPosted: Wed Dec 20, 2017 5:48 pm
Great thread! I've gone through about half of it and the amount of work that has been put in is amazing. 1600lb tank!! Just thinking about moving a tank that size makes my head spin. Going to definitely read more of the thread when I have time. Lots of helpful pictures and nuggets in there for any one starting a tank of their own.

tim

Posts: 122
Joined: Thu Nov 24, 2011 9:50 pm
Location: Golden, CO
PostPosted: Thu Dec 21, 2017 9:57 am
Thanks guys!

Tngo, it was a beast to move in, one cannot simply lift a 1600lb tank no matter how many friends you bribe with free micro-brew beer and pizza. All hydraulics all the time :P . Thanks for looking through the thread, its starting to come together even if I've had some setbacks.

Binder, that is great news! Android is the way I was hoping to go anyways, so many more options. If you have any suggestions I am all ears. Tis the season for discounted tablets :D.
Image
User avatar
Posts: 2743
Joined: Fri Mar 18, 2011 6:20 pm
Location: Illinois
PostPosted: Thu Dec 21, 2017 12:40 pm
tkeracer619 wrote:Thanks guys!
Binder, that is great news! Android is the way I was hoping to go anyways, so many more options. If you have any suggestions I am all ears. Tis the season for discounted tablets :D.

yea, i need to get back into improving my android app. it's showing its "age". I'm trying to to find some time to work out the details for ideas I have in mind. Life continues to get in the way though but slow and gradual work is being done.



Sent from my XT1585 using Tapatalk

Posts: 122
Joined: Thu Nov 24, 2011 9:50 pm
Location: Golden, CO
PostPosted: Tue Jan 23, 2018 1:10 am
Looks like going beyond 6 temp probes will require a fair amount of coding to the libraries. Until we can work through that I'll use 6 probes to just monitor as well as be a safety to my BTA propagation system. I'll continue to bring modules online.

Currently I am trying to get the 6 probes to display, I was just using the wizard but I suspect it isn't displaying the extra 3 probes due to the screen program. I'll make a custom screen in the next few days. If anyone sees something obvious why it doesn't display please let me know.

So far here is my code... super complex I know :lol:

Code: Select all
#include <ReefAngel_Features.h>
#include <Globals.h>
#include <RA_Wifi.h>
#include <Wire.h>
#include <OneWire.h>
#include <Time.h>
#include <DS1307RTC.h>
#include <InternalEEPROM.h>
#include <RA_NokiaLCD.h>
#include <RA_ATO.h>
#include <RA_Joystick.h>
#include <LED.h>
#include <RA_TempSensor.h>
#include <Relay.h>
#include <RA_PWM.h>
#include <Timer.h>
#include <Memory.h>
#include <InternalEEPROM.h>
#include <RA_Colors.h>
#include <RA_CustomColors.h>
#include <Salinity.h>
#include <RF.h>
#include <IO.h>
#include <ORP.h>
#include <AI.h>
#include <PH.h>
#include <WaterLevel.h>
#include <Humidity.h>
#include <DCPump.h>
#include <PAR.h>
#include <ReefAngel.h>

////// Place global variable code below here


////// Place global variable code above here


void setup()
{
    // This must be the first line
    ReefAngel.Init();  //Initialize controller
    ReefAngel.AddStandardMenu();  // Add Standard Menu
    ReefAngel.Use2014Screen();  // Let's use 2014 Screen
    // Ports toggled in Feeding Mode
    ReefAngel.FeedingModePorts = 0;
    // Ports toggled in Water Change Mode
    ReefAngel.WaterChangePorts = 0;
    // Ports turned off when Overheat temperature exceeded
    ReefAngel.OverheatShutoffPorts = Port1Bit | Port2Bit | Port3Bit | Port4Bit | Port5Bit | Port6Bit | Port7Bit | Port8Bit;
    // Ports toggled when Lights On / Off menu entry selected
    ReefAngel.LightsOnPorts = Port1Bit | Port3Bit;
    // Use T1 probe as temperature and overheat functions
    ReefAngel.TempProbe = T1_PROBE;
    ReefAngel.OverheatProbe = T1_PROBE;
    // Set the Overheat temperature setting
    InternalMemory.OverheatTemp_write( 820 );
    ////// Place additional initialization code below here
    // Add additional temperature probes
    ReefAngel.AddExtraTempProbes();
    //ReefAngel.Params.Temp[T4_PROBE];
    //ReefAngel.Params.Temp[T5_PROBE];
    //ReefAngel.Params.Temp[T6_PROBE];


    ////// Place additional initialization code above here
}

void loop()
{
    ReefAngel.StandardLights( Port1,11,0,23,30 );
    ReefAngel.StandardHeater( T6_PROBE,Port2,770,800 );
    ReefAngel.StandardLights( Port3,14,0,17,0 );
    ReefAngel.StandardHeater( T5_PROBE,Port4,770,800 );
    ReefAngel.StandardHeater( T4_PROBE,Port5,770,800 );
    ReefAngel.StandardHeater( T3_PROBE,Port6,770,800 );
    ReefAngel.StandardHeater( T2_PROBE,Port7,770,800 );
    ReefAngel.StandardHeater( T1_PROBE,Port8,770,800 );

    ////// Place your custom code below here


    ////// Place your custom code above here

    ReefAngel.Portal( "tkeracer619" );
    // This should always be the last line
    ReefAngel.ShowInterface();
}



// RA_STRING1=null
// RA_STRING2=null
// RA_STRING3=null
// RA_LABEL LABEL_ACTINIC=Actinic
// RA_LABEL LABEL_DAYLIGHT=Daylight
Image

Return to You and your tank

Who is online

Users browsing this forum: No registered users and 3 guests