Purchased used unit

Posts: 2
Joined: Mon Sep 02, 2019 2:42 pm
PostPosted: Wed Sep 04, 2019 5:02 am
Good morning all,

I purchased a used setup and it has a reef angel plus controller, wifi attachment (and the cable for it). I wanted to return the unit to default and see if the controller works as many of the other components I was sold is faulty. This is why I'm a little hesitant to spend the $40ish dollars for a ttl to serial cable. (From canada)

Does anyone have a pinout for this cable so I can at least try to program before I start spending money on other accessories?
I have several arduino components, the ttl to serial convertor and Dupont connectors.

Posts: 12572
Joined: Fri Mar 18, 2011 6:47 pm
PostPosted: Wed Sep 04, 2019 8:35 pm
ftdi.png (10.15 KiB) Viewed 1011 times

Posts: 2
Joined: Mon Sep 02, 2019 2:42 pm
PostPosted: Thu Sep 05, 2019 3:22 am
Great, thanks. Board wouldn't power with my serial to ttl connected with this pinout. I changed the VCC location and got it to download the factory default program. Looking forward to trying this out tonight!
Thanks again

Return to Ask anything here

Who is online

Users browsing this forum: No registered users and 1 guest