pH
- DrewPalmer04
- Posts: 818
- Joined: Tue May 29, 2012 2:12 pm
- Location: Christopher, IL
pH
What would everything think this might mean? I read EKGs in my work and I'm seeing a bit of a pattern here with my pH. I might need to consider additives to stablize?
- DrewPalmer04
- Posts: 818
- Joined: Tue May 29, 2012 2:12 pm
- Location: Christopher, IL
Re: pH
Looks like these:
And:
And this off at 6 AM:
Code: Select all
ReefAngel.StandardLights( Port7,6,0,20,0 );
And:
Code: Select all
ReefAngel.PWM.SetActinic( PWMParabola(6,5,21,0,0,85,0) );
Code: Select all
if (hour>=21 || hour()<6)
analogWrite(lowATOPin,0);
else
analogWrite(lowATOPin,(int)MoonPhase()*2.55);
- DrewPalmer04
- Posts: 818
- Joined: Tue May 29, 2012 2:12 pm
- Location: Christopher, IL
Re: pH
But to me it looks like something is happening at 45 after the hour in intervals....sort of ....sometimes 30 min after the hour intervals.
Re: pH
I'm looking at the data on the portal and the way I see it is there is something that is going on between 5 and 6 that is bringing the pH down. It's not normal for pH to peak like that.
It seems to start at 5 and goes back to normal at 6.
It seems to start at 5 and goes back to normal at 6.
Roberto.
- DrewPalmer04
- Posts: 818
- Joined: Tue May 29, 2012 2:12 pm
- Location: Christopher, IL
Re: pH
I'm seeing the exact same thing.
Here is all I'm running:
Here is all I'm running:
Code: Select all
// Autogenerated file by RAGen (v1.2.2.171), (05/29/2012 16:15)
// RA_052912_1615.ino
//
// This version designed for v0.9.0 or later
/* The following features are enabled for this File:
#define VersionMenu
#define DisplayLEDPWM
#define wifi
#define WDT
#define SIMPLE_MENU
*/
#include <ReefAngel_Features.h>
#include <Globals.h>
#include <RA_Wifi.h>
#include <Wire.h>
#include <OneWire.h>
#include <Time.h>
#include <DS1307RTC.h>
#include <InternalEEPROM.h>
#include <RA_NokiaLCD.h>
#include <RA_ATO.h>
#include <RA_Joystick.h>
#include <LED.h>
#include <RA_TempSensor.h>
#include <Relay.h>
#include <RA_PWM.h>
#include <Timer.h>
#include <Memory.h>
#include <ReefAngel.h>
////// Place global variable code below here
////// Place global variable code above here
void setup()
{
// This must be the first line
ReefAngel.Init(); //Initialize controller
ReefAngel.FeedingModePorts = 0;
// Ports toggled in Water Change Mode
ReefAngel.WaterChangePorts = 0;
// Ports toggled when Lights On / Off menu entry selected
ReefAngel.LightsOnPorts = 0;
// Ports turned off when Overheat temperature exceeded
ReefAngel.OverheatShutoffPorts = 0;
// Use T1 probe as temperature and overheat functions
ReefAngel.TempProbe = T1_PROBE;
ReefAngel.OverheatProbe = T1_PROBE;
// Set the Overheat temperature setting
InternalMemory.OverheatTemp_write( 860 );
ReefAngel.SingleATO( false,Port2,60,0 );
pinMode(lowATOPin,OUTPUT);
// Ports that are always on
ReefAngel.Relay.On(Port3);
ReefAngel.Relay.On(Port4);
ReefAngel.Relay.On(Port7);
ReefAngel.Relay.On(Port8);
ReefAngel.Relay.On(Port5);
////// Place additional initialization code below here
//randomSeed(analogRead(0)); Possible future wavemaker
//ReefAngel.Init(); //Initialize controller
//ReefAngel.Timer[1].SetInterval(random(15,35));
//ReefAngel.Timer[1].Start();
//ReefAngel.Relay.On(Port5); End here
////// Place additional initialization code above here
}
void loop()
{
// Specific functions that use Internal Memory values
ReefAngel.StandardLights( Port1,19,0,6,30 );
ReefAngel.StandardHeater( Port4,740,770 );
ReefAngel.StandardLights( Port7,6,0,20,0 );
ReefAngel.StandardLights( Port8,7,0,19,0 );
//////// ReefAngel.Wavemaker1(Port5);
/////// ReefAngel.Wavemaker2(Port6);
ReefAngel.PWM.SetDaylight( PWMParabola(7,5,19,0,0,85,0) );
ReefAngel.PWM.SetActinic( PWMParabola(6,5,21,0,0,85,0) );
///if ( ReefAngel.Timer[1].IsTriggered() ) Future wavemaker
/// {
/// ReefAngel.Timer[1].SetInterval(random(15,35));
/// ReefAngel.Timer[1].Start();
/// ReefAngel.Relay.Toggle(Port5);
/// ReefAngel.Relay.Toggle(Port6);
/// } End future wavemaker
////// Place your custom code below here
if (hour()>=6 && hour()<20)
analogWrite(lowATOPin,0);
else
analogWrite(lowATOPin,(int)MoonPhase()*2.55);
////// Place your custom code above here
// This sends all the data to the portal
// Do not add any custom code that changes any relay status after this line
// The only code after this line should be the ShowInterface function
ReefAngel.Portal("DrewPalmer04", "********");
// This should always be the last line
ReefAngel.ShowInterface();
}
- DrewPalmer04
- Posts: 818
- Joined: Tue May 29, 2012 2:12 pm
- Location: Christopher, IL
Re: pH
I have nothing over than a few wall timers going. I don't have anything that kicks on at 5am? My stuff is mainly 0600 to 2000 or 2100
- DrewPalmer04
- Posts: 818
- Joined: Tue May 29, 2012 2:12 pm
- Location: Christopher, IL
Re: pH
The reef angel is isolated on a batter backup? There is nothing that I can think of that would draw power. My sump MH is on a seperate circuit...but It's on at 2030 and off at 0730. The air handler for the AC is on the same line, but I would see spikes throughout the day...clueless really?????
Re: pH
I don't think it is related to power draw.
Do you have a gas heater in the house? Does any appliance get turned on at 5am?
CO2 can impact pH on the tank. I would think that it would have a less steep affect, but you never know.
My office tank shoots pH warnings all weekend long every weekend.
Why? I think it is because there is nobody in the office breathing and thus no CO2, which causes the pH to rise up more than on normal business days.
Do you have a gas heater in the house? Does any appliance get turned on at 5am?
CO2 can impact pH on the tank. I would think that it would have a less steep affect, but you never know.
My office tank shoots pH warnings all weekend long every weekend.
Why? I think it is because there is nobody in the office breathing and thus no CO2, which causes the pH to rise up more than on normal business days.
Roberto.
- DrewPalmer04
- Posts: 818
- Joined: Tue May 29, 2012 2:12 pm
- Location: Christopher, IL
Re: pH
I have a gas heater, but the line has been turned off for two months....That's the only thing gas in my house...no other appliances. The dryer is found upstairs and vents outside...my sump is in the basement with windows open 24/7 for gas exchange. I find it weird that on the weekly ph chart it shows it throughout the day at set times? I'm thinking is my pH dropped like that (in real life) I would have some acid cooked fish???
- DrewPalmer04
- Posts: 818
- Joined: Tue May 29, 2012 2:12 pm
- Location: Christopher, IL
Re: pH
hmmm...on my chart I'm showing 07:39 on my pH drop....to 5.63
- DrewPalmer04
- Posts: 818
- Joined: Tue May 29, 2012 2:12 pm
- Location: Christopher, IL
Re: pH
And all last week...07:30 I have dropped...
- DrewPalmer04
- Posts: 818
- Joined: Tue May 29, 2012 2:12 pm
- Location: Christopher, IL
Re: pH
Can i get a webbanner with just the controller sending portal data?
- DrewPalmer04
- Posts: 818
- Joined: Tue May 29, 2012 2:12 pm
- Location: Christopher, IL
Re: pH
done. so this ph issue could be power draw? Its happening everyday at 0730
- DrewPalmer04
- Posts: 818
- Joined: Tue May 29, 2012 2:12 pm
- Location: Christopher, IL
Re: pH
My T5HO lights with fan...probably draws 120 watts