One of my outlets is not working.

Post Reply
cpace
Posts: 4
Joined: Sun Jan 20, 2013 5:11 pm

One of my outlets is not working.

Post by cpace »

I had a single outlet go out on my power bar today. Just stopped working. It shows that it is working on the reef angel screen but no power. Can the outlet be replaced? I have tried to cycle the unit and single outlet on and off without success. Do I now just have a 7 outlet controller?

Thanks in advance for any help,
Chris
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: One of my outlets is not working.

Post by rimai »

What did you have connected in it?
Yes, the relay can be replaced.
http://forum.reefangel.com/viewtopic.php?p=14834#p14834
If you would like to send it for repair, please PM me.
Roberto.
cpace
Posts: 4
Joined: Sun Jan 20, 2013 5:11 pm

Re: One of my outlets is not working.

Post by cpace »

I had the blue LED cord for the JBJ advanced plugged in, 4 Blue LEDs, plugged into port 8. If it wasn't a light, I probably wouldn't have noticed. Does anyone have a FAQ/writeup on how to replace the relay? I haven't looked at the relay box closely either. How does it open?

And I can't send a PM?
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: One of my outlets is not working.

Post by rimai »

Prop it open, desolder the relay and solder a new one in its place.
PM is allowed after 3 posts.
Roberto.
User avatar
DrewPalmer04
Posts: 818
Joined: Tue May 29, 2012 2:12 pm
Location: Christopher, IL

Re: One of my outlets is not working.

Post by DrewPalmer04 »

cpace wrote: And I can't send a PM?

YOU'RE ALMOST THERE!! haha :mrgreen:

But if you can solder...you're good to go!
Out for now...but not over.

VISIT: Ethernet Module/Wifi Alternative
cpace
Posts: 4
Joined: Sun Jan 20, 2013 5:11 pm

Re: One of my outlets is not working.

Post by cpace »

Thanks for the info and hopefully this counts for my third post! I should be able to switch it out myself. Thanks for the help!
Post Reply