RA jebao harness

Post Reply
SaltyGXP
Posts: 24
Joined: Tue Apr 16, 2013 3:25 pm
Location: Ohio

RA jebao harness

Post by SaltyGXP »

Befor I got my RA I had an Apex so I modded the jebao to work with the Apex. In doing so I cut the wall wart plug thar hooked to the jebao controller. So now I need to solder the jebao wall wart cable to the RA cable pcb . My issue is not knowing weather the jebao cable is center + outer - or center - and outer +. Also what's + and - on the pcb.

Thanks
Dustin
Image
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: RA jebao harness

Post by rimai »

Center positive
Roberto.
SaltyGXP
Posts: 24
Joined: Tue Apr 16, 2013 3:25 pm
Location: Ohio

Re: RA jebao harness

Post by SaltyGXP »

rimai wrote:Center positive
Sweet thanks rimai! Any ideas on which spot on the pcb is + and -?
Image
SaltyGXP
Posts: 24
Joined: Tue Apr 16, 2013 3:25 pm
Location: Ohio

Re: RA jebao harness

Post by SaltyGXP »

Nvm I got it
Image
Post Reply