Code: Select all
void setup()
{
// This must be the first line
ReefAngel.Init(); //Initialize controller
ReefAngel.Use2014Screen(); // Let's use 2014 Screen
// Ports toggled in Feeding Mode
ReefAngel.FeedingModePorts = Port5Bit;
// Ports toggled in Water Change Mode
ReefAngel.WaterChangePorts = Port3Bit | Port4Bit | Port5Bit;
// Ports toggled when Lights On / Off menu entry selected
ReefAngel.LightsOnPorts = Port1Bit | Port2Bit;
// Ports turned off when Overheat temperature exceeded
ReefAngel.OverheatShutoffPorts = Port1Bit | Port2Bit | Port3Bit | Port4Bit | Port5Bit | Port7Bit;
// Use T1 probe as temperature and overheat functions
ReefAngel.TempProbe = T1_PROBE;
ReefAngel.OverheatProbe = T1_PROBE;
// Feeeding and Water Change mode speed
ReefAngel.DCPump.FeedingSpeed=0;
ReefAngel.DCPump.WaterChangeSpeed=0;
// Ports that are always on
ReefAngel.Relay.On( Port4 );
////// Place additional initialization code below here
////// Place additional initialization code above here
}
void loop()
{
ReefAngel.ActinicLights( Port1 );
ReefAngel.DayLights( Port2 );
ReefAngel.StandardHeater( Port3 );
ReefAngel.StandardLights( Port5, 19,0,7,0);
ReefAngel.DosingPumpRepeat1( Port6 );
ReefAngel.DosingPumpRepeat2( Port7 );
ReefAngel.DosingPumpRepeat3( Port8 );
ReefAngel.PWM.DaylightPWMParabola();
ReefAngel.PWM.ActinicPWMParabola();
ReefAngel.DCPump.LowATOChannel = Sync; // WP40
ReefAngel.DCPump.HighATOChannel = AntiSync; // SW 8
ReefAngel.DCPump.AntiSyncOffset=125;
////// Place your custom code below here
// DC pumps
// To run this code must choose Custom in portal
static int rmode;
static boolean changeMode=true;
// These are the modes we can cycle through. You can add more and even repeat...
byte modes[] = { ReefCrest, Lagoon, TidalSwell, ShortPulse, Sine, LongPulse, Else, Gyre, NutrientTransport };
if (now()%3600==0 || changeMode==true) { // Change every 60 mins (3600seconds) or controller reboot
rmode=random(100)%sizeof(modes); // Change the mode by picking from our array
changeMode=false;
}
// Set timer when in feeding mode
static unsigned long feeding;
if (ReefAngel.DisplayedMenu==FEEDING_MODE) feeding=now();
// Continue NutrientTranspot Mode for 30 minutes after feeding
if (now()-feeding<1800) {
ReefAngel.DCPump.UseMemory=false;
ReefAngel.DCPump.Duration=InternalMemory.DCPumpDuration_read();
ReefAngel.DCPump.Mode=NutrientTransport;
ReefAngel.DCPump.Speed=80;
// Night mode (go to 30%)
} else if (now()%SECS_PER_DAY>25200 && now()%SECS_PER_DAY<=68400) { // 7am to 7pm
ReefAngel.DCPump.UseMemory=false;
ReefAngel.DCPump.Duration=InternalMemory.DCPumpDuration_read();
ReefAngel.DCPump.Mode=Gyre;
ReefAngel.DCPump.Speed=30;
} else if (InternalMemory.DCPumpMode_read()==11) {
// Custom Mode and nothing else going on
ReefAngel.DCPump.UseMemory=false;
ReefAngel.DCPump.Duration=InternalMemory.DCPumpDuration_read();
ReefAngel.DCPump.Mode=modes[rmode]; // Put the mode to the random mode :)
ReefAngel.DCPump.Speed=InternalMemory.DCPumpSpeed_read(); // Set speed from portal
} else {
ReefAngel.DCPump.UseMemory=true; // Will reset all values from memory
}
Can someone here please tell me why my Jebao wavemaker pump is running full throttle constantly on the ATO high? the ATO low is working great. in fact I made an adaptor to run both pumps on my ATO low and they're working but I'd really like to get the antisync working. The code I'm using in the meantime is below.
thanks
Code: Select all
void setup()
{
// This must be the first line
ReefAngel.Init(); //Initialize controller
ReefAngel.Use2014Screen(); // Let's use 2014 Screen
// Ports toggled in Feeding Mode
ReefAngel.FeedingModePorts = Port5Bit;
// Ports toggled in Water Change Mode
ReefAngel.WaterChangePorts = Port3Bit | Port4Bit | Port5Bit;
// Ports toggled when Lights On / Off menu entry selected
ReefAngel.LightsOnPorts = Port1Bit | Port2Bit;
// Ports turned off when Overheat temperature exceeded
ReefAngel.OverheatShutoffPorts = Port1Bit | Port2Bit | Port3Bit | Port4Bit | Port5Bit | Port7Bit;
// Use T1 probe as temperature and overheat functions
ReefAngel.TempProbe = T1_PROBE;
ReefAngel.OverheatProbe = T1_PROBE;
// Feeeding and Water Change mode speed
ReefAngel.DCPump.FeedingSpeed=0;
ReefAngel.DCPump.WaterChangeSpeed=0;
// Ports that are always on
ReefAngel.Relay.On( Port4 );
////// Place additional initialization code below here
////// Place additional initialization code above here
}
void loop()
{
ReefAngel.ActinicLights( Port1 );
ReefAngel.DayLights( Port2 );
ReefAngel.StandardHeater( Port3 );
ReefAngel.StandardLights( Port5 );
ReefAngel.DosingPumpRepeat1( Port6 );
ReefAngel.DosingPumpRepeat2( Port7 );
ReefAngel.DosingPumpRepeat3( Port8 );
ReefAngel.PWM.DaylightPWMParabola();
ReefAngel.PWM.ActinicPWMParabola();
ReefAngel.DCPump.LowATOChannel = Sync; // WP40 & SW 8
ReefAngel.DCPump.HighATOChannel = None; //
////// Place your custom code below here
// DC pumps....................................
static int rmode;
static boolean changeMode=true;
// These are the modes we can cycle through. You can add more and even repeat...
byte modes[] = { ReefCrest, Lagoon, TidalSwell, ShortPulse, Sine, Else, Gyre, NutrientTransport };
if (now()%1800==0 || changeMode==true) // Change every 30 mins (1800seconds) or controller reboot
{
rmode=random(100)%sizeof(modes); // Change the mode by picking from our array
changeMode=false;
}
// Set timer when in feeding mode
static unsigned long feeding;
if (ReefAngel.DisplayedMenu==FEEDING_MODE) feeding=now();
// Continue NutrientTranspot Mode for 30 minutes after feeding
if (now()-feeding<1800)
{
ReefAngel.DCPump.UseMemory=false;
ReefAngel.DCPump.Duration=InternalMemory.DCPumpDuration_read();
ReefAngel.DCPump.Mode=ReefCrest;
ReefAngel.DCPump.Speed=80;
}
// Night/Quiet mode
else if (hour()>=2 && hour()<8 ) // 2am to 8am
{
ReefAngel.DCPump.UseMemory=false;
ReefAngel.DCPump.SetMode( Sine,35,10 );
}
else if (hour()>=15 && hour()<19) // 3pm and 7pm
{
ReefAngel.DCPump.UseMemory=false;
ReefAngel.DCPump.SetMode( LongPulse,30,1 );
}
//Storm mode
else if (hour()>=1 && hour()<2) // 1am and 2am
{
ReefAngel.DCPump.UseMemory=false;
ReefAngel.DCPump.SetMode( Else,80,15 );
}
else if (hour()>=11 && hour()<12) // 11am and 12pm
{
ReefAngel.DCPump.UseMemory=false;
ReefAngel.DCPump.SetMode( LongPulse,95,2 );
}
else if (hour()>=21 && hour()<22) // 9pm and 10pm
{
ReefAngel.DCPump.UseMemory=false;
ReefAngel.DCPump.SetMode( ReefCrest,85,15 );
}
// Custom Mode and nothing else going on
else if (InternalMemory.DCPumpMode_read()==11)
{
ReefAngel.DCPump.UseMemory=false;
ReefAngel.DCPump.Duration=InternalMemory.DCPumpDuration_read();
ReefAngel.DCPump.Mode=modes[rmode]; // Put the mode to the random mode :)
ReefAngel.DCPump.Speed=InternalMemory.DCPumpSpeed_read(); // Set speed from portal
} else {
ReefAngel.DCPump.UseMemory=true; // Will reset all values from memory
}
////// Place your custom code above here