Reefology's code


Posts: 173
Joined: Fri Dec 26, 2014 6:38 pm
PostPosted: Sat Nov 26, 2016 3:30 pm
Code: Select all
 // DC pumps
    // To run this code must choose Custom in portal
    static int rmode;
    static boolean changeMode=true;

    // These are the modes we can cycle through. You can add more and even repeat...
    byte modes[] = { NutrientTransport, Sine, ReefCrest, Lagoon, TidalSwell, ShortPulse, Sine, LongPulse, Else, Gyre, NutrientTransport };

    if (now()%1200==0 || changeMode==true) { // Change every 20 (1200seconds) mins or controller reboot
    rmode=random(100)%sizeof(modes); // Change the mode by picking from our array
    changeMode=false;
    }

    // Set timer when in feeding mode
    static unsigned long feeding;
    if (ReefAngel.DisplayedMenu==FEEDING_MODE) feeding=now();
   
    if (now()-feeding<3000) {
    // Continue NutrientTranspot Mode for 45 minutes
    ReefAngel.DCPump.UseMemory=false;
    ReefAngel.DCPump.Duration=InternalMemory.DCPumpDuration_read();
    ReefAngel.DCPump.Mode=NutrientTransport;
    } else if (now()%SECS_PER_DAY<37800 || now()%SECS_PER_DAY>=81000) { // 10:30am / 10:30pm
    // Night mode (go to 30%)
    ReefAngel.DCPump.UseMemory=false;
    ReefAngel.DCPump.Duration=InternalMemory.DCPumpDuration_read();
    ReefAngel.DCPump.Mode=Gyre;
    ReefAngel.DCPump.Speed=30;
    } else if (InternalMemory.DCPumpMode_read()==11) {
    // Custom Mode and nothing else going on
    ReefAngel.DCPump.UseMemory=false;
    ReefAngel.DCPump.Duration=InternalMemory.DCPumpDuration_read();
    ReefAngel.DCPump.Mode=modes[rmode]; // Put the mode to the random mode :)
    ReefAngel.DCPump.Speed=InternalMemory.DCPumpSpeed_read(); // Set speed from portal
    } else {
    ReefAngel.DCPump.UseMemory=true; // Will reset all values from memory
    }

hi, based on the code above, I don't understand why my pwm channels have been at 0 for the past 45 mins? can someone help me figure out what I've done wrong? thanks
Image

Posts: 12288
Joined: Fri Mar 18, 2011 6:47 pm
PostPosted: Sat Nov 26, 2016 4:41 pm
What mode do you see in the screen?
Roberto.

Posts: 173
Joined: Fri Dec 26, 2014 6:38 pm
PostPosted: Sat Nov 26, 2016 10:04 pm
not sure which screen you're referring to but in the portal, the internal memory keeps getting reset to 0's for both speed and duration? currently the mode alternates but it was set up in custom??
Image

Posts: 12288
Joined: Fri Mar 18, 2011 6:47 pm
PostPosted: Sat Nov 26, 2016 11:49 pm
The RA screen. Move the joystick to the right or left.
Or are you using a custom screen?
Roberto.

Posts: 173
Joined: Fri Dec 26, 2014 6:38 pm
PostPosted: Sun Nov 27, 2016 6:04 pm
it says normal mode. what is that? don't see it listed in the portal as a mode.
Image

Posts: 12288
Joined: Fri Mar 18, 2011 6:47 pm
PostPosted: Sun Nov 27, 2016 6:51 pm
Normal?
Are you sure you are in the RF screen?
Can you send a picture?
Roberto.

Posts: 173
Joined: Fri Dec 26, 2014 6:38 pm
PostPosted: Mon Nov 28, 2016 5:38 pm
sorry Roberto, the mode is gyre, duration is 15 and speed is 30
Image

Posts: 12288
Joined: Fri Mar 18, 2011 6:47 pm
PostPosted: Mon Nov 28, 2016 7:25 pm
Which channels did you assign for DCPump?
Roberto.

Posts: 173
Joined: Fri Dec 26, 2014 6:38 pm
PostPosted: Mon Nov 28, 2016 7:38 pm
lol, I just logged in to tell you i figured it out...had the actinic channel set to None and of course thought I had the pump wired to daylights :p

thanks Roberto
Image

Posts: 173
Joined: Fri Dec 26, 2014 6:38 pm
PostPosted: Wed Jan 11, 2017 3:56 pm
Code: Select all
void setup()
{
    // This must be the first line
    ReefAngel.Init();  //Initialize controller
    ReefAngel.Use2014Screen();  // Let's use 2014 Screen
    // Ports toggled in Feeding Mode
    ReefAngel.FeedingModePorts = Port5Bit;
    // Ports toggled in Water Change Mode
    ReefAngel.WaterChangePorts = Port3Bit | Port4Bit | Port5Bit;
    // Ports toggled when Lights On / Off menu entry selected
    ReefAngel.LightsOnPorts = Port1Bit | Port2Bit;
    // Ports turned off when Overheat temperature exceeded
    ReefAngel.OverheatShutoffPorts = Port1Bit | Port2Bit | Port3Bit | Port4Bit | Port5Bit | Port7Bit;
    // Use T1 probe as temperature and overheat functions
    ReefAngel.TempProbe = T1_PROBE;
    ReefAngel.OverheatProbe = T1_PROBE;

    // Feeeding and Water Change mode speed
    ReefAngel.DCPump.FeedingSpeed=0;
    ReefAngel.DCPump.WaterChangeSpeed=0;
   
 

    // Ports that are always on
    ReefAngel.Relay.On( Port4 );

    ////// Place additional initialization code below here
   

    ////// Place additional initialization code above here
}

void loop()
{
    ReefAngel.ActinicLights( Port1 );
    ReefAngel.DayLights( Port2 );
    ReefAngel.StandardHeater( Port3 );
    ReefAngel.StandardLights( Port5, 19,0,7,0);
    ReefAngel.DosingPumpRepeat1( Port6 );
    ReefAngel.DosingPumpRepeat2( Port7 );
    ReefAngel.DosingPumpRepeat3( Port8 );
    ReefAngel.PWM.DaylightPWMParabola();
    ReefAngel.PWM.ActinicPWMParabola();
    ReefAngel.DCPump.LowATOChannel = Sync; // WP40
    ReefAngel.DCPump.HighATOChannel = AntiSync; // SW 8
    ReefAngel.DCPump.AntiSyncOffset=125;
   
    ////// Place your custom code below here
   
    // DC pumps
    // To run this code must choose Custom in portal
    static int rmode;
    static boolean changeMode=true;

    // These are the modes we can cycle through. You can add more and even repeat...
    byte modes[] = { ReefCrest, Lagoon, TidalSwell, ShortPulse, Sine, LongPulse, Else, Gyre, NutrientTransport };

    if (now()%3600==0 || changeMode==true) { // Change every 60 mins (3600seconds) or controller reboot
    rmode=random(100)%sizeof(modes); // Change the mode by picking from our array
    changeMode=false;
    }

    // Set timer when in feeding mode
    static unsigned long feeding;
    if (ReefAngel.DisplayedMenu==FEEDING_MODE) feeding=now();
    // Continue NutrientTranspot Mode for 30 minutes after feeding
    if (now()-feeding<1800) {
    ReefAngel.DCPump.UseMemory=false;
    ReefAngel.DCPump.Duration=InternalMemory.DCPumpDuration_read();
    ReefAngel.DCPump.Mode=NutrientTransport;
    ReefAngel.DCPump.Speed=80;
    // Night mode (go to 30%)
    } else if (now()%SECS_PER_DAY>25200 && now()%SECS_PER_DAY<=68400) { // 7am to 7pm
    ReefAngel.DCPump.UseMemory=false;
    ReefAngel.DCPump.Duration=InternalMemory.DCPumpDuration_read();
    ReefAngel.DCPump.Mode=Gyre;
    ReefAngel.DCPump.Speed=30;
    } else if (InternalMemory.DCPumpMode_read()==11) {
    // Custom Mode and nothing else going on
    ReefAngel.DCPump.UseMemory=false;
    ReefAngel.DCPump.Duration=InternalMemory.DCPumpDuration_read();
    ReefAngel.DCPump.Mode=modes[rmode]; // Put the mode to the random mode :)
    ReefAngel.DCPump.Speed=InternalMemory.DCPumpSpeed_read(); // Set speed from portal
    } else {
    ReefAngel.DCPump.UseMemory=true; // Will reset all values from memory
    }


Can someone here please tell me why my Jebao wavemaker pump is running full throttle constantly on the ATO high? the ATO low is working great. in fact I made an adaptor to run both pumps on my ATO low and they're working but I'd really like to get the antisync working. The code I'm using in the meantime is below.

thanks

Code: Select all

void setup()
{
    // This must be the first line
    ReefAngel.Init();  //Initialize controller
    ReefAngel.Use2014Screen();  // Let's use 2014 Screen
    // Ports toggled in Feeding Mode
    ReefAngel.FeedingModePorts = Port5Bit;
    // Ports toggled in Water Change Mode
    ReefAngel.WaterChangePorts = Port3Bit | Port4Bit | Port5Bit;
    // Ports toggled when Lights On / Off menu entry selected
    ReefAngel.LightsOnPorts = Port1Bit | Port2Bit;
    // Ports turned off when Overheat temperature exceeded
    ReefAngel.OverheatShutoffPorts = Port1Bit | Port2Bit | Port3Bit | Port4Bit | Port5Bit | Port7Bit;
    // Use T1 probe as temperature and overheat functions
    ReefAngel.TempProbe = T1_PROBE;
    ReefAngel.OverheatProbe = T1_PROBE;

    // Feeeding and Water Change mode speed
    ReefAngel.DCPump.FeedingSpeed=0;
    ReefAngel.DCPump.WaterChangeSpeed=0;
   
 

    // Ports that are always on
    ReefAngel.Relay.On( Port4 );

    ////// Place additional initialization code below here
   

    ////// Place additional initialization code above here
}

void loop()
{
    ReefAngel.ActinicLights( Port1 );
    ReefAngel.DayLights( Port2 );
    ReefAngel.StandardHeater( Port3 );
    ReefAngel.StandardLights( Port5 );
    ReefAngel.DosingPumpRepeat1( Port6 );
    ReefAngel.DosingPumpRepeat2( Port7 );
    ReefAngel.DosingPumpRepeat3( Port8 );
    ReefAngel.PWM.DaylightPWMParabola();
    ReefAngel.PWM.ActinicPWMParabola();
    ReefAngel.DCPump.LowATOChannel = Sync; // WP40 & SW 8
    ReefAngel.DCPump.HighATOChannel = None; // 
   
    ////// Place your custom code below here
   
    // DC pumps....................................
    static int rmode;
    static boolean changeMode=true;

    // These are the modes we can cycle through. You can add more and even repeat...
    byte modes[] = { ReefCrest, Lagoon, TidalSwell, ShortPulse, Sine, Else, Gyre, NutrientTransport };

    if (now()%1800==0 || changeMode==true)  // Change every 30 mins (1800seconds) or controller reboot
    {
    rmode=random(100)%sizeof(modes); // Change the mode by picking from our array
    changeMode=false;
    }

    // Set timer when in feeding mode
    static unsigned long feeding;
    if (ReefAngel.DisplayedMenu==FEEDING_MODE) feeding=now();
   
    // Continue NutrientTranspot Mode for 30 minutes after feeding
    if (now()-feeding<1800)
    {
    ReefAngel.DCPump.UseMemory=false;
    ReefAngel.DCPump.Duration=InternalMemory.DCPumpDuration_read();
    ReefAngel.DCPump.Mode=ReefCrest;
    ReefAngel.DCPump.Speed=80;
    }
   
    // Night/Quiet mode
      else if (hour()>=2 && hour()<8 ) // 2am to 8am
    {
    ReefAngel.DCPump.UseMemory=false;
    ReefAngel.DCPump.SetMode( Sine,35,10 );
    }
      else if (hour()>=15 && hour()<19) // 3pm and 7pm
    {
    ReefAngel.DCPump.UseMemory=false;
    ReefAngel.DCPump.SetMode( LongPulse,30,1 );
    }
   
    //Storm mode
    else if (hour()>=1 && hour()<2) // 1am and 2am
    {
    ReefAngel.DCPump.UseMemory=false;
    ReefAngel.DCPump.SetMode( Else,80,15 ); 
    }
      else if (hour()>=11 && hour()<12) // 11am and 12pm
    {
    ReefAngel.DCPump.UseMemory=false;
    ReefAngel.DCPump.SetMode( LongPulse,95,2 ); 
    }
    else if (hour()>=21 && hour()<22) // 9pm and 10pm
    {
    ReefAngel.DCPump.UseMemory=false;
    ReefAngel.DCPump.SetMode( ReefCrest,85,15 ); 
    }
   
    // Custom Mode and nothing else going on
    else if (InternalMemory.DCPumpMode_read()==11)
    {
    ReefAngel.DCPump.UseMemory=false;
    ReefAngel.DCPump.Duration=InternalMemory.DCPumpDuration_read();
    ReefAngel.DCPump.Mode=modes[rmode]; // Put the mode to the random mode :)
    ReefAngel.DCPump.Speed=InternalMemory.DCPumpSpeed_read(); // Set speed from portal
    } else {
    ReefAngel.DCPump.UseMemory=true; // Will reset all values from memory
    }
    ////// Place your custom code above here

Image
PreviousNext

Return to Ask anything here

Who is online

Users browsing this forum: No registered users and 1 guest

cron