Relay #3 is stuck in the ON position.

Basic / Standard Reef Angel hardware
Post Reply
User avatar
oscarinw
Posts: 31
Joined: Fri Apr 19, 2013 1:00 pm

Relay #3 is stuck in the ON position.

Post by oscarinw »

Relay #3 is stuck in the ON position.
I rebooted the board and unplugged/plugged the system. LCD screen shows relay as if it was off. However, anything that plugs into it, powers on. I have it as a doser powering an Toms aqua lifter pump.
It only turns on for one minute a day. Yesterday, it started on time and it never stopped...
Any ideas or suggestions are welcome.

Thanks
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: Relay #3 is stuck in the ON position.

Post by rimai »

Is the port still on if you unplug the svga and leave just the relay box powered on?
Roberto.
User avatar
oscarinw
Posts: 31
Joined: Fri Apr 19, 2013 1:00 pm

Re: Relay #3 is stuck in the ON position.

Post by oscarinw »

Yes, when svga is unplugged, the relay remains ON as do the pwm dimmers...
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: Relay #3 is stuck in the ON position.

Post by rimai »

That seems like the relay went bad somehow.
You will need to send back for repair.
PM for details.
Roberto.
butcherman
Posts: 44
Joined: Thu Apr 05, 2012 11:14 am

Re: Relay #3 is stuck in the ON position.

Post by butcherman »

Hi I am having the same issue. Where can I have my relay box repaired in South Africa?
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: Relay #3 is stuck in the ON position.

Post by rimai »

You can replace it yourself if you are good with soldering or send it back to us.
Roberto.
Post Reply