Help with Wifi adapter

Basic / Standard Reef Angel hardware
Post Reply
oneboss302
Posts: 36
Joined: Sat Feb 15, 2014 6:51 am

Help with Wifi adapter

Post by oneboss302 »

Hopefully someone can tell me what is going on with my Wifi adapter. I am trying to reprogram it, but I keep getting an error on the wifi tool "Error. Please disconnect and then reconnect the reef angel wifi adapter from the USB"

I have tried multiple PC's with different OS's. Still cant get it to work. The message comes up After I enter my wifi settings.

It was working in he past.

Thanks. Hope someone can help before I totally lose it and chuck this thing through a window. :)
Attachments
Capture.PNG
Capture.PNG (54.18 KiB) Viewed 6139 times
oneboss302
Posts: 36
Joined: Sat Feb 15, 2014 6:51 am

Re: Help with Wifi adapter

Post by oneboss302 »

Now I am getting a different error. Please see below. pulling 0.0.0.0 address. GRRRRRRR
Attachments
Capture.JPG
Capture.JPG (73.65 KiB) Viewed 6137 times
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: Help with Wifi adapter

Post by rimai »

Sometimes the router takes too long to assign an ip and reports 0.0.0.0
Check your router for connected devices.
If the attachment is blinking green and no blue, it is connected
Roberto.
oneboss302
Posts: 36
Joined: Sat Feb 15, 2014 6:51 am

Re: Help with Wifi adapter

Post by oneboss302 »

Thanks. I can see it in the list of devices on the router. It is now blinking green (no blue).
oneboss302
Posts: 36
Joined: Sat Feb 15, 2014 6:51 am

Re: Help with Wifi adapter

Post by oneboss302 »

Spoke too soon. Back to blinking Green and Blue.
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: Help with Wifi adapter

Post by rimai »

Is it a new router or the same one you had been connecting before?
Roberto.
Post Reply