Temp probs reading 00.0

Basic / Standard Reef Angel hardware
Post Reply
jjdezek
Posts: 329
Joined: Fri May 17, 2013 1:35 pm

Temp probs reading 00.0

Post by jjdezek »

I have 3 temp probes and all three all of a sudden are reading 00.0 I reset the controller with no luck. What would cause all 3 to read 00.0?
Image
jjdezek
Posts: 329
Joined: Fri May 17, 2013 1:35 pm

Re: Temp probs reading 00.0

Post by jjdezek »

Just tried reloading program and still no luck.
Image
Civics14
Posts: 95
Joined: Fri Nov 14, 2014 8:27 am

Re: Temp probs reading 00.0

Post by Civics14 »

If you got them on eBay like I did, the pins were reversed on mine.
Image
jjdezek
Posts: 329
Joined: Fri May 17, 2013 1:35 pm

Re: Temp probs reading 00.0

Post by jjdezek »

No I've had these for awhile and they all worked then bam all three just read zero
Image
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: Temp probs reading 00.0

Post by rimai »

Check for water damage and try one at a time.
Everytime you remove or insert a probe, make sure to power cycle to get the controller to recognize it.
It only scans for new probes on reboot.
Roberto.
jjdezek
Posts: 329
Joined: Fri May 17, 2013 1:35 pm

Re: Temp probs reading 00.0

Post by jjdezek »

Ok that did the trick thanks for the help
Image
Post Reply