Reef Angel Forum

Posted: **Wed Jan 17, 2018 5:48 am**

hi there

Just taking baby steps migrating from RA+ to RA*. Good oportunity to review all codes and physical installation...

One question is about the 4 output ports. I use 2 Jebao Cable Attachments with RA+, connected to my Relay Box. As far as I understand, now I should connect both Jebao Cable directely to RA*, using the 4 output ports. Is that right?

The problem is that visually the Jebao Cable connector seems not to fit in the RA* output ports (not actually tryed yet). The output ports seems more like a "RJ45" modular jack.

Can someone confirm how to use it? Am I talking nonsense?

Rafa

Posted: **Wed Jan 17, 2018 9:11 am**

Correct. You can cut and patch RJ45 or use an Ethernet cable and splice to it.

Posted: **Wed Jan 17, 2018 9:38 am**

Roberto, tks

So I can just crimp a network cable obeying the manual's specs regarding the output ports and plug it?

Rafa

Posted: **Wed Jan 17, 2018 9:40 am**

Posted: **Wed Jan 17, 2018 9:44 am**

Awesome!!!!!

Reef Angel Forum

Baby Steps migrating from RA+ to RA* - Output Ports

Baby Steps migrating from RA+ to RA* - Output Ports

Re: Baby Steps migrating from RA+ to RA* - Output Ports

Re: Baby Steps migrating from RA+ to RA* - Output Ports

Re: Baby Steps migrating from RA+ to RA* - Output Ports

Re: Baby Steps migrating from RA+ to RA* - Output Ports