RA+ to RA*

Basic / Standard Reef Angel hardware

Posts: 112
Joined: Wed Sep 12, 2012 8:41 am
PostPosted: Thu Mar 22, 2018 12:09 am
I had a problem with buss faults all night. So now i have the only things plugged into the controller are the relay box, and the water level sensor. I redone the code removed the salinity sensor. and uploaded it. I have remove the usb hub, and the salinity sensor.

I have tried 2 different computers, and 2 different web browser to add info to the portal. it still does not show up on my end. I did see the test one you made, but after i tried to load one more they disappeared. when the buss fault happened in the night i did to a alarm thou.
riggeek

Image

Posts: 112
Joined: Wed Sep 12, 2012 8:41 am
PostPosted: Thu Mar 22, 2018 3:41 am
The Buss fault made it about 2 hours and came back.
it came back on again after about 4 hours.
I swapped usb cables for the relay and water level. They are Plugged straight into the RA*.
touch screen was unresponsive, and the led light on the RA* was blinking red/green. Was able to do a reboot from the Uapp. I leave in a few days and really need to get this figured out.


This time the screen would had went to sleep and would not turn on. Is there a way to get the screen to turn back on short of a power cycle?
Last edited by riggeek on Thu Mar 22, 2018 8:12 am, edited 1 time in total.
riggeek

Image

Posts: 12188
Joined: Fri Mar 18, 2011 6:47 pm
PostPosted: Thu Mar 22, 2018 8:07 am
Just as curiosity. Can you unplug the USB cable of the relay box and power it without being connected to RA?
What color is the logo?
Roberto.

Posts: 112
Joined: Wed Sep 12, 2012 8:41 am
PostPosted: Thu Mar 22, 2018 8:19 am
Turned off the power switch on the relay box.
unplugged the usb from the relay box on the relay box side.
Turned the power on on the relay box.
the Angel logo was blink on and off with a white color.

When it does this it also seems to lock me out of the touch screen. but can reboot from the Uapp.

I still cannot update the portal email alarms as well. In the box that says notifications it just has a spinning icon but nothing ever shows up.
riggeek

Image

Posts: 12188
Joined: Fri Mar 18, 2011 6:47 pm
PostPosted: Thu Mar 22, 2018 9:58 am
Ok, I think you got the wrong relay box.
Some of the boxes that we shipped out were mistakenly shipped with the RANet module inside.
So, I can offer you a RANet radio so you can use this relay box wirelessly or I can swap out yours for a regular box.
PM me for details.
I'll pm you a screenshot of what I get for alerts.
Roberto.

Posts: 112
Joined: Wed Sep 12, 2012 8:41 am
PostPosted: Thu Mar 22, 2018 10:19 am
Here is what I see.

Capture 1.PNG
Capture 1.PNG (5.11 KiB) Viewed 746 times
riggeek

Image

Posts: 12188
Joined: Fri Mar 18, 2011 6:47 pm
PostPosted: Thu Mar 22, 2018 10:38 am
Are you getting emails though?
I see it sent an email about 30 minutes ago for salinity less than 32
Roberto.

Posts: 112
Joined: Wed Sep 12, 2012 8:41 am
PostPosted: Thu Mar 22, 2018 11:41 am
I am getting emails. So they are active, I just can not see them.
riggeek

Image

Posts: 12188
Joined: Fri Mar 18, 2011 6:47 pm
PostPosted: Thu Mar 22, 2018 12:20 pm
Weird. Did you also try another browser?
Roberto.

Posts: 112
Joined: Wed Sep 12, 2012 8:41 am
PostPosted: Thu Mar 22, 2018 12:25 pm
Tried chrome, and Internet Explorer, on 2 different computers
riggeek

Image
PreviousNext

Return to Standard

Who is online

Users browsing this forum: No registered users and 3 guests

cron