problem rele raffreddamento

Basic / Standard Reef Angel hardware
Post Reply
sebimme
Posts: 26
Joined: Sat Jan 07, 2012 12:56 am

Re: problem rele raffreddamento

Post by sebimme »

Hi guys, please Roberto look at the code generatated with webwizard because if you program with it the standardfan function don’t work fine, while if you program with wizard inside arduino program it work good...


Inviato dal mio iPhone utilizzando Tapatalk
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: problem rele raffreddamento

Post by rimai »

I'll look into it.
Roberto.
sebimme
Posts: 26
Joined: Sat Jan 07, 2012 12:56 am

Re: problem rele raffreddamento

Post by sebimme »

Any update


Inviato dal mio iPhone utilizzando Tapatalk
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: problem rele raffreddamento

Post by rimai »

On what?
Roberto.
sebimme
Posts: 26
Joined: Sat Jan 07, 2012 12:56 am

Re: problem rele raffreddamento

Post by sebimme »

You said ...I’ll look into it....
Do you find the problem?


Inviato dal mio iPhone utilizzando Tapatalk
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: problem rele raffreddamento

Post by rimai »

No. I'll look into it.
Roberto.
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: problem rele raffreddamento

Post by rimai »

Fixed
Roberto.
sebimme
Posts: 26
Joined: Sat Jan 07, 2012 12:56 am

Re: problem rele raffreddamento

Post by sebimme »

Ciao Roberto
Same error for ph controlled port continuously on off, like the chiller


Inviato dal mio iPhone utilizzando Tapatalk
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: problem rele raffreddamento

Post by rimai »

Can you post the code you got?
Roberto.
sebimme
Posts: 26
Joined: Sat Jan 07, 2012 12:56 am

Re: problem rele raffreddamento

Post by sebimme »

Is the same of the first post by ROBBYMAN86


Inviato dal mio iPhone utilizzando Tapatalk
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: problem rele raffreddamento

Post by rimai »

Ah, ok. The values have to be inverted position too.
Roberto.
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: problem rele raffreddamento

Post by rimai »

No. The code was correct.
Are you using it to increase or decrease pH?
Make sure the values are in the correct order.
Roberto.
sebimme
Posts: 26
Joined: Sat Jan 07, 2012 12:56 am

Re: problem rele raffreddamento

Post by sebimme »

To decrease ph, how you can see from the code the values are right but the port can’t control properly because the on off cicle are inconsistent with values


Inviato dal mio iPhone utilizzando Tapatalk
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: problem rele raffreddamento

Post by rimai »

You are using the wrong function...
pH Control:
This function turns on/off at specific pH readings. The device that uses this function must increase pH. Example of device that may use this function is a Kalk based Doser.

CO2 Control:
This function turns on/off at specific pH readings. The device that uses this function must lower pH. Example of device that may use this function is a calcium reactor.
Roberto.
Post Reply