problem rele raffreddamento

Basic / Standard Reef Angel hardware
Post Reply
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: problem rele raffreddamento

Post by rimai »

Ah, ok. The values have to be inverted position too.
Roberto.
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: problem rele raffreddamento

Post by rimai »

No. The code was correct.
Are you using it to increase or decrease pH?
Make sure the values are in the correct order.
Roberto.
sebimme
Posts: 26
Joined: Sat Jan 07, 2012 12:56 am

Re: problem rele raffreddamento

Post by sebimme »

To decrease ph, how you can see from the code the values are right but the port can’t control properly because the on off cicle are inconsistent with values


Inviato dal mio iPhone utilizzando Tapatalk
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: problem rele raffreddamento

Post by rimai »

You are using the wrong function...
pH Control:
This function turns on/off at specific pH readings. The device that uses this function must increase pH. Example of device that may use this function is a Kalk based Doser.

CO2 Control:
This function turns on/off at specific pH readings. The device that uses this function must lower pH. Example of device that may use this function is a calcium reactor.
Roberto.
Post Reply