Convert 0-10v to 5v pwm

Basic / Standard Reef Angel hardware
Post Reply
topjimmy
Posts: 146
Joined: Tue May 08, 2012 8:16 am

Convert 0-10v to 5v pwm

Post by topjimmy »

Any way to use the dimming ports for the actinic on a led driver that takes 3.3 - 5v?

If not, then if I use the ato ports will I be able to dim the channels via the app?

Sent from my SAMSUNG-SM-G935A using Tapatalk
Image
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: Convert 0-10v to 5v pwm

Post by rimai »

You will have to open the relay box to desolder some components.
The ato port won't allow you to use the app to change the %.
You can get a dimming expansion module which has jumpers to change the signal or you can get the RA*, which also has jumpers.
Roberto.
topjimmy
Posts: 146
Joined: Tue May 08, 2012 8:16 am

Re: Convert 0-10v to 5v pwm

Post by topjimmy »

Thanks,

I was hoping that there was a way to step it down before the driver.

Sent from my SAMSUNG-SM-G935A using Tapatalk
Image
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: Convert 0-10v to 5v pwm

Post by rimai »

If you use a resistor divider, it may work depending on your driver.
Roberto.
Post Reply