Portal issues?

Related to the Portal

Posts: 55
Joined: Mon Jun 22, 2015 5:58 am
PostPosted: Sun Apr 16, 2017 3:56 pm
All connections dripped again. Repluged Wifi attachment and back connected. What do you think?

Sent from my LG-V410 using Tapatalk

Posts: 11645
Joined: Fri Mar 18, 2011 6:47 pm
PostPosted: Sun Apr 16, 2017 7:55 pm
How far are you from your router?
Does it make any difference if it is closer?
Roberto.

Posts: 55
Joined: Mon Jun 22, 2015 5:58 am
PostPosted: Mon Apr 17, 2017 6:09 am
Router location hasn't been an issue since I added a 20' antenna...It's still connected, so beginning to think it is a cable issue, an intermittent connection failure. I'll order another one and see if that fixes it.

Posts: 55
Joined: Mon Jun 22, 2015 5:58 am
PostPosted: Mon Apr 17, 2017 6:11 am
I don't see replacement a cable on the website.

Posts: 11645
Joined: Fri Mar 18, 2011 6:47 pm
PostPosted: Mon Apr 17, 2017 9:27 am
I sent you a pm
Roberto.

Posts: 59
Joined: Sun Mar 09, 2014 11:01 am
Location: Santos - Brazil
PostPosted: Thu Jun 15, 2017 7:37 pm
Hello

Returning to the ReefAngel family after a year without my aquarium.

Well, almost everything running like a charm ... it's like riding a bicycle ... once you mount it you know what to do.

Well.. my reefangel is accessible from my LAN. It is also accessible outside my LAN (port forward is OK) but the Portal does not get updated.

I tryed updating the wifi attachment by following the post http://forum.reefangel.com/viewtopic.php?f=3&t=4601, but nothing happend.

I am using the code:
ReefAngel.Portal("user","pass");

Am I missing something? Can someone help me out?

Best regards
Rafa
Image

Posts: 59
Joined: Sun Mar 09, 2014 11:01 am
Location: Santos - Brazil
PostPosted: Thu Jun 15, 2017 7:58 pm
Ahh just to add some information. Using Uapp I was able to download the portal's labels. But no uptading at all,
Image

Posts: 11645
Joined: Fri Mar 18, 2011 6:47 pm
PostPosted: Thu Jun 15, 2017 8:02 pm
I think you don't have the portal key on the portal settings.
You should use:
ReefAngel.Portal("user");
Roberto.

Posts: 59
Joined: Sun Mar 09, 2014 11:01 am
Location: Santos - Brazil
PostPosted: Sat Jun 17, 2017 9:52 am
Roberto

Thank you for your help. Actually I do have the portal key on the portal settings enabled. So the right code line is ReefAngel.Portal("user","pass");

But thinking about your answer.. I started to review all the configurations and I found "User Control Panel" --> "Profile" --> "Reef Angel Wifi Address" setted with an old (one year old) ip address of mine. Once I updated it, the portal worked just fine!!!

I still have one more issue regarding my reefangel revival, but I will address it on the right forum.

Tks for everything
Rafa
Image
Previous

Return to Portal

Who is online

Users browsing this forum: No registered users and 1 guest