Charts and 0 values

Related to the Portal
Post Reply
User avatar
lnevo
Posts: 5430
Joined: Fri Jul 20, 2012 9:42 am

Charts and 0 values

Post by lnevo »

I understand not storing 0's in the DB and all, but when charting values and you get a 0 value, the charts on the portal don't reflect the time between where the 0 values are... So for instance. Moon rise / set, looking at PWMA, it looks like it immediately drops to 0 and then comes back up again, despite there being ~12 hours between the rise and set. Is there anything that can be done so if an interval is 0 the duration of time is shown properly in the chart?
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: Charts and 0 values

Post by rimai »

Well, it will show 5 minutes prior and 5 minutes past, right?
Or am I not following?
Roberto.
User avatar
lnevo
Posts: 5430
Joined: Fri Jul 20, 2012 9:42 am

Re: Charts and 0 values

Post by lnevo »

Take the example for rise/set time. In the PWM view yes you will see the 5 minutes prior and past, but you won't "see" the duration to scale with the rest of the data. So what only looks like an instant was 10-12 hours...
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: Charts and 0 values

Post by rimai »

Oh, I see what you mean now.
It should show the timeline properly, but it is not doing it.
Need to investigate.
Roberto.
Post Reply