Portal not displaying relay activity and web chart info
Re: Portal not displaying relay activity and web chart info
I think I set it to the host 0.0.0.0 when I was having issues with the wifi module.. :/
Re: Portal not displaying relay activity and web chart info
Yes, but not sure what else might be missing. That was a big red flagAppleseed wrote:I assume you mean;
HOST=0.0.0.0:2000
should it be 198.171.134.6:80
Re: Portal not displaying relay activity and web chart info
I would also change the idletimer to 3
IdleTimer=0
IdleTimer=0
Roberto.
Re: Portal not displaying relay activity and web chart info
cool, set the idletimer to 3, will try again and see what happens.
Re: Portal not displaying relay activity and web chart info
one other stupid question, is it necessary to power off the head-unit when connecting/disconnecting the bluetooth and wifi modules? I usually do but was not sure if i should or should not.
Re: Portal not displaying relay activity and web chart info
Not for wifi, maybe for bt
Re: Portal not displaying relay activity and web chart info
I assume you mean they are hot swappable?.
Re: Portal not displaying relay activity and web chart info
rimai wrote:sorry... yeah..
I fixed it
It seems the relay and web banners still not being updated. The portal does show the correct ph, temps etc.
Unless im being to impaitent...
I can connect to my RA using the android app (via the mobile network), so i assume my nat etc is working.
Re: Portal not displaying relay activity and web chart info
Please check these settings against yours.
This is the macro file I use to program the units:
This is the macro file I use to program the units:
Code: Select all
send '$$$'
wait 'CMD'
sendln 'set ftp address 198.175.253.161'
wait'AOK'
sendln 'save'
wait 'config'
sendln 'set wlan ssid testing'
wait 'AOK'
sendln 'set wlan pass a01b02c03d'
wait 'AOK'
sendln 'set option deviceid ReefAngelWifi'
wait 'AOK'
sendln 'set w j 1'
wait 'AOK'
sendln 'set c c 0'
wait 'AOK'
sendln 'set c r 0'
wait 'AOK'
sendln 'set c o 0'
wait 'AOK'
sendln 'set c i 3'
wait 'AOK'
sendln 'set dns name www.reefangel.com'
wait 'AOK'
sendln 'set i h 198.171.134.6'
wait 'AOK'
sendln 'set i r 80'
wait 'AOK'
sendln 'set i f 0x06'
wait 'AOK'
sendln 'set s t 0x10'
wait 'AOK'
sendln 'set u m 2'
wait 'AOK'
sendln 'set i p 2'
wait 'AOK'
sendln 'set u b 57600'
wait 'AOK'
sendln 'set s p 0'
wait 'AOK'
sendln 'set c s 1420'
wait 'AOK'
Roberto.
Re: Portal not displaying relay activity and web chart info
Ill reconfigure it using the relevant parameters.
I did try use the Wifi Attachment Setup Utility to reconfigure it but kept getting the error "Please disconnect and then reconnect the Reef Angel Wifi Attachment from the USB-TTL cable and try again" which reminded my why i manually configured the module :/
I did try use the Wifi Attachment Setup Utility to reconfigure it but kept getting the error "Please disconnect and then reconnect the Reef Angel Wifi Attachment from the USB-TTL cable and try again" which reminded my why i manually configured the module :/
Re: Portal not displaying relay activity and web chart info
Whoo hoo, i reconfigured it using that script but with a static IP and it seems to be working
thanks again for all your help.
It now beer time
thanks again for all your help.
It now beer time