Portal not showing correct info
Portal not showing correct info
Portal is not showing the correct info. It shows a bunch of relay boxes and other stuff I dont have. Banner doesnt work either.
Reef Angel wifi address: 173.6xxxxxx:2000
My reefangelid:
ganjero
Connection Status:
Ready
Last Update:
Sun Jul 14 12:56:20 2013
Displaying data from:
Reef Angel Controller (live)
Reef Angel wifi address: 173.6xxxxxx:2000
My reefangelid:
ganjero
Connection Status:
Ready
Last Update:
Sun Jul 14 12:56:20 2013
Displaying data from:
Reef Angel Controller (live)
Re: Portal not showing correct info
Looks like the banner is working now.
It was missing the initial labels. I forced them in the database for you.
Are you talking about relays 11 through 18?
It was missing the initial labels. I forced them in the database for you.
Are you talking about relays 11 through 18?
Roberto.
Re: Portal not showing correct info
Thanks, it seems the portal is working fine too; it was showing like I had 8 extra relay bars, voretch info, etc., stuff I did not have. Why do the relays skip 9 & 10?
Re: Portal not showing correct info
It's happening again (showing 8 relay boxes and all possible expansion attachments). is it something I'm doing?
I have been working in getting a custom mode on my jebao and feeding modes for them but cant get them to work and I'm not sure if that is messing my portal too.
I want his mode for the jebao flow:
byte ElseMode( byte MidPoint, byte Offset, boolean WaveSync )
{
// Static's only initialize the first time they are called
static unsigned long LastChange=millis(); // Set the inital time that the last change occurred
static int Delay = random( 500, 3000); // Set the initial delay
static int NewSpeed = MidPoint; // Set the initial speed
static int AntiSpeed = MidPoint; // Set the initial anti sync speed
if ((millis()-LastChange) > Delay) // Check if the delay has elapsed
{
Delay=random(500,5000); // If so, come up with a new delay
int ChangeUp = random(Offset); // Amount to go up or down
if (random(100)<50) // 50/50 chance of speed going up or going down
{
NewSpeed = MidPoint - ChangeUp;
AntiSpeed = MidPoint + ChangeUp;
}
else
{
NewSpeed = MidPoint + ChangeUp;
AntiSpeed = MidPoint - ChangeUp;
}
LastChange=millis(); // Reset the time of the last change
}
if (WaveSync)
{
return NewSpeed;
}
else
{
return AntiSpeed;
}
}
and I want this for the feed modes
static StartFeeding=0;
if (ReefAngel.DisplayedMenu==FEEDING_MODE)
StartFeeding=now(); // if we entered feeding mode, register what time it was.
if (now()-StartFeeding > 1800 && now()-StartFeeding < 5400) // if feeding started between 1800 and 5400 seconds
ReefAngel.PWM.SetActinic(100);
else
ReefAngel.PWM.SetActinic(30);
and this is my current code:
I have been working in getting a custom mode on my jebao and feeding modes for them but cant get them to work and I'm not sure if that is messing my portal too.
I want his mode for the jebao flow:
byte ElseMode( byte MidPoint, byte Offset, boolean WaveSync )
{
// Static's only initialize the first time they are called
static unsigned long LastChange=millis(); // Set the inital time that the last change occurred
static int Delay = random( 500, 3000); // Set the initial delay
static int NewSpeed = MidPoint; // Set the initial speed
static int AntiSpeed = MidPoint; // Set the initial anti sync speed
if ((millis()-LastChange) > Delay) // Check if the delay has elapsed
{
Delay=random(500,5000); // If so, come up with a new delay
int ChangeUp = random(Offset); // Amount to go up or down
if (random(100)<50) // 50/50 chance of speed going up or going down
{
NewSpeed = MidPoint - ChangeUp;
AntiSpeed = MidPoint + ChangeUp;
}
else
{
NewSpeed = MidPoint + ChangeUp;
AntiSpeed = MidPoint - ChangeUp;
}
LastChange=millis(); // Reset the time of the last change
}
if (WaveSync)
{
return NewSpeed;
}
else
{
return AntiSpeed;
}
}
and I want this for the feed modes
static StartFeeding=0;
if (ReefAngel.DisplayedMenu==FEEDING_MODE)
StartFeeding=now(); // if we entered feeding mode, register what time it was.
if (now()-StartFeeding > 1800 && now()-StartFeeding < 5400) // if feeding started between 1800 and 5400 seconds
ReefAngel.PWM.SetActinic(100);
else
ReefAngel.PWM.SetActinic(30);
and this is my current code:
#include <ReefAngel_Features.h>
#include <Globals.h>
#include <RA_Wifi.h>
#include <Wire.h>
#include <OneWire.h>
#include <Time.h>
#include <DS1307RTC.h>
#include <InternalEEPROM.h>
#include <RA_NokiaLCD.h>
#include <RA_ATO.h>
#include <RA_Joystick.h>
#include <LED.h>
#include <RA_TempSensor.h>
#include <Relay.h>
#include <RA_PWM.h>
#include <Timer.h>
#include <Memory.h>
#include <InternalEEPROM.h>
#include <RA_Colors.h>
#include <RA_CustomColors.h>
#include <Salinity.h>
#include <RF.h>
#include <IO.h>
#include <ORP.h>
#include <AI.h>
#include <PH.h>
#include <WaterLevel.h>
#include <Humidity.h>
#include <DCPump.h>
#include <ReefAngel.h>
////// Place global variable code below here
////// Place global variable code above here
void setup()
{
// This must be the first line
ReefAngel.Init(); //Initialize controller
// Ports toggled in Feeding Mode
ReefAngel.FeedingModePorts = Port7Bit | Port8Bit;
ReefAngel.FeedingModePortsE[0] = 0;
// Ports toggled in Water Change Mode
ReefAngel.WaterChangePorts = Port7Bit | Port8Bit;
ReefAngel.WaterChangePortsE[0] = Port3Bit;
// Ports toggled when Lights On / Off menu entry selected
ReefAngel.LightsOnPorts = Port1Bit | Port4Bit;
ReefAngel.LightsOnPortsE[0] = 0;
// Ports turned off when Overheat temperature exceeded
ReefAngel.OverheatShutoffPorts = Port1Bit | Port2Bit | Port3Bit | Port5Bit;
ReefAngel.OverheatShutoffPortsE[0] = 0;
// Use T1 probe as temperature and overheat functions
ReefAngel.TempProbe = T1_PROBE;
ReefAngel.OverheatProbe = T1_PROBE;
// Set the Overheat temperature setting
InternalMemory.OverheatTemp_write( 851 );
// Feeeding and Water Change mode speed
static time_t StartFeeding=0;
if (ReefAngel.DisplayedMenu==FEEDING_MODE)
StartFeeding=now(); // if we entered feeding mode, register what time it was.
if (now()-StartFeeding > 1800 && now()-StartFeeding < 5400) // if feeding started between 1800 and 5400 seconds
ReefAngel.PWM.SetActinic(100);
else
ReefAngel.PWM.SetActinic(30);
// Ports that are always on
ReefAngel.Relay.On( Port8 );
ReefAngel.Relay.On( Box1_Port2 );
ReefAngel.Relay.On( Box1_Port3 );
ReefAngel.Relay.On( Box1_Port4 );
ReefAngel.Relay.On( Box1_Port5 );
ReefAngel.Relay.On( Box1_Port6 );
////// Place additional initialization code below here
////// Place additional initialization code above here
}
void loop()
{
ReefAngel.StandardLights( Port1,14,0,19,0 );
ReefAngel.StandardLights( Port2,15,0,20,0 );
ReefAngel.StandardLights( Port3,19,55,22,0 );
ReefAngel.StandardLights( Port4,14,0,22,15 );
ReefAngel.StandardHeater( Port5,780,785 );
ReefAngel.StandardFan( Port6,780,800 );
ReefAngel.Relay.DelayedOn( Port7,60 );
ReefAngel.StandardLights( Box1_Port1,22,0,16,0 );
ReefAngel.DCPump.DaylightChannel = Sync;
ReefAngel.DCPump.ActinicChannel = Sync;
////// Place your custom code below here
if (ReefAngel.DCPump.Mode==Custom)
{
ReefAngel.PWM.SetDaylight( ElseMode(70,30,true )); // ElseMode on sync mode, 70 +/- 30%
}
////// Place your custom code above here
// This should always be the last line
ReefAngel.Portal( "ganjero" );
ReefAngel.ShowInterface();
}
void DrawCustomMain()
{
int x,y;
char text[10];
// Parameters
#if defined DisplayLEDPWM && ! defined RemoveAllLights
ReefAngel.LCD.DrawMonitor( 15, 62, ReefAngel.Params,
ReefAngel.PWM.GetDaylightValue(), ReefAngel.PWM.GetActinicValue() );
#else // defined DisplayLEDPWM && ! defined RemoveAllLights
ReefAngel.LCD.DrawMonitor( 15, 62, ReefAngel.Params );
#endif // defined DisplayLEDPWM && ! defined RemoveAllLights
pingSerial();
// Main Relay Box
byte TempRelay = ReefAngel.Relay.RelayData;
TempRelay &= ReefAngel.Relay.RelayMaskOff;
TempRelay |= ReefAngel.Relay.RelayMaskOn;
ReefAngel.LCD.DrawOutletBox( 12, 93, TempRelay );
pingSerial();
// Relay Expansion
TempRelay = ReefAngel.Relay.RelayDataE[0];
TempRelay &= ReefAngel.Relay.RelayMaskOffE[0];
TempRelay |= ReefAngel.Relay.RelayMaskOnE[0];
ReefAngel.LCD.DrawOutletBox( 12, 107, TempRelay );
pingSerial();
// Date and Time
ReefAngel.LCD.DrawDate( 6, 122 );
pingSerial();
}
void DrawCustomGraph()
{
ReefAngel.LCD.DrawGraph( 5, 5 );
}
byte ElseMode( byte MidPoint, byte Offset, boolean WaveSync )
{
// Static's only initialize the first time they are called
static unsigned long LastChange=millis(); // Set the inital time that the last change occurred
static int Delay = random( 500, 3000); // Set the initial delay
static int NewSpeed = MidPoint; // Set the initial speed
static int AntiSpeed = MidPoint; // Set the initial anti sync speed
if ((millis()-LastChange) > Delay) // Check if the delay has elapsed
{
Delay=random(500,5000); // If so, come up with a new delay
int ChangeUp = random(Offset); // Amount to go up or down
if (random(100)<50) // 50/50 chance of speed going up or going down
{
NewSpeed = MidPoint - ChangeUp;
AntiSpeed = MidPoint + ChangeUp;
}
else
{
NewSpeed = MidPoint + ChangeUp;
AntiSpeed = MidPoint - ChangeUp;
}
LastChange=millis(); // Reset the time of the last change
}
if (WaveSync)
{
return NewSpeed;
}
else
{
return AntiSpeed;
}
}
Re: Portal not showing correct info
I changed the code and that seem to fixed it, I could not get the elsemode posted above to work, I'm not sure where the error was ( I would like if someone help me find it). For now I'm using the reefcrest mode, the variable speed in the portal shows on the pwm channels which is fine but how do I get to show it in the DC Pump area?
Thanks
This is the code I'm using now...O left the elsemode code in there until I figure out how to use it.
Thanks
This is the code I'm using now...O left the elsemode code in there until I figure out how to use it.
Code: Select all
#include <ReefAngel_Features.h>
#include <Globals.h>
#include <RA_Wifi.h>
#include <Wire.h>
#include <OneWire.h>
#include <Time.h>
#include <DS1307RTC.h>
#include <InternalEEPROM.h>
#include <RA_NokiaLCD.h>
#include <RA_ATO.h>
#include <RA_Joystick.h>
#include <LED.h>
#include <RA_TempSensor.h>
#include <Relay.h>
#include <RA_PWM.h>
#include <Timer.h>
#include <Memory.h>
#include <InternalEEPROM.h>
#include <RA_Colors.h>
#include <RA_CustomColors.h>
#include <Salinity.h>
#include <RF.h>
#include <IO.h>
#include <ORP.h>
#include <AI.h>
#include <PH.h>
#include <WaterLevel.h>
#include <Humidity.h>
#include <DCPump.h>
#include <ReefAngel.h>
////// Place global variable code below here
////// Place global variable code above here
void setup()
{
// This must be the first line
ReefAngel.Init(); //Initialize controller
// Ports toggled in Feeding Mode
ReefAngel.FeedingModePorts = Port7Bit | Port8Bit;
ReefAngel.FeedingModePortsE[0] = 0;
// Ports toggled in Water Change Mode
ReefAngel.WaterChangePorts = Port7Bit | Port8Bit;
ReefAngel.WaterChangePortsE[0] = Port3Bit;
// Ports toggled when Lights On / Off menu entry selected
ReefAngel.LightsOnPorts = Port1Bit | Port4Bit;
ReefAngel.LightsOnPortsE[0] = 0;
// Ports turned off when Overheat temperature exceeded
ReefAngel.OverheatShutoffPorts = Port1Bit | Port2Bit | Port3Bit | Port5Bit;
ReefAngel.OverheatShutoffPortsE[0] = 0;
// Use T2 probe as temperature and overheat functions
ReefAngel.TempProbe = T2_PROBE;
ReefAngel.OverheatProbe = T2_PROBE;
// Set the Overheat temperature setting
InternalMemory.OverheatTemp_write( 851 );
// Feeeding and Water Change mode speed
static time_t StartFeeding=0;
if (ReefAngel.DisplayedMenu==FEEDING_MODE)
StartFeeding=now(); // if we entered feeding mode, register what time it was.
if (now()-StartFeeding > 1800 && now()-StartFeeding < 5400) // if feeding started between 1800 and 5400 seconds
ReefAngel.PWM.SetActinic(100);
else
ReefAngel.PWM.SetActinic(45);
// Ports that are always on
ReefAngel.Relay.On( Port8 );
ReefAngel.Relay.On( Box1_Port1);
ReefAngel.Relay.On( Box1_Port2 );
ReefAngel.Relay.On( Box1_Port3 );
ReefAngel.Relay.On( Box1_Port4 );
ReefAngel.Relay.On( Box1_Port7 );
ReefAngel.Relay.On( Box1_Port8 );
////// Place additional initialization code below here
////// Place additional initialization code above here
}
void loop()
{
ReefAngel.StandardLights( Port1,14,0,19,0 );
ReefAngel.StandardLights( Port2,15,0,20,0 );
ReefAngel.StandardLights( Port3,19,55,22,0 );
ReefAngel.StandardLights( Port4,14,0,22,15 );
ReefAngel.StandardHeater( Port5,780,785 );
ReefAngel.StandardFan( Port6,780,800 );
ReefAngel.Relay.DelayedOn( Port7,60 );
ReefAngel.StandardLights( Box1_Port5,22,0,16,0 );
ReefAngel.DCPump.UseMemory = false;
////// Place your custom code below here
ReefAngel.PWM.SetDaylight( ReefCrestMode(70,30,true) ); // ReefCrest at 70% +/- 30% on sync mode
////// Place your custom code above here
// This should always be the last line
ReefAngel.Portal( "ganjero" );
ReefAngel.ShowInterface();
}
void DrawCustomMain()
{
int x,y;
char text[10];
// Parameters
#if defined DisplayLEDPWM && ! defined RemoveAllLights
ReefAngel.LCD.DrawMonitor( 15, 62, ReefAngel.Params,
ReefAngel.PWM.GetDaylightValue(), ReefAngel.PWM.GetActinicValue() );
#else // defined DisplayLEDPWM && ! defined RemoveAllLights
ReefAngel.LCD.DrawMonitor( 15, 62, ReefAngel.Params );
#endif // defined DisplayLEDPWM && ! defined RemoveAllLights
pingSerial();
// Main Relay Box
byte TempRelay = ReefAngel.Relay.RelayData;
TempRelay &= ReefAngel.Relay.RelayMaskOff;
TempRelay |= ReefAngel.Relay.RelayMaskOn;
ReefAngel.LCD.DrawOutletBox( 12, 93, TempRelay );
pingSerial();
// Relay Expansion
TempRelay = ReefAngel.Relay.RelayDataE[0];
TempRelay &= ReefAngel.Relay.RelayMaskOffE[0];
TempRelay |= ReefAngel.Relay.RelayMaskOnE[0];
ReefAngel.LCD.DrawOutletBox( 12, 107, TempRelay );
pingSerial();
// Date and Time
ReefAngel.LCD.DrawDate( 6, 122 );
pingSerial();
}
void DrawCustomGraph()
{
ReefAngel.LCD.DrawGraph( 5, 5 );
}
byte ElseMode( byte MidPoint, byte Offset, boolean WaveSync )
{
// Static's only initialize the first time they are called
static unsigned long LastChange=millis(); // Set the inital time that the last change occurred
static int Delay = random( 500, 3000); // Set the initial delay
static int NewSpeed = MidPoint; // Set the initial speed
static int AntiSpeed = MidPoint; // Set the initial anti sync speed
if ((millis()-LastChange) > Delay) // Check if the delay has elapsed
{
Delay=random(500,5000); // If so, come up with a new delay
int ChangeUp = random(Offset); // Amount to go up or down
if (random(100)<50) // 50/50 chance of speed going up or going down
{
NewSpeed = MidPoint - ChangeUp;
AntiSpeed = MidPoint + ChangeUp;
}
else
{
NewSpeed = MidPoint + ChangeUp;
AntiSpeed = MidPoint - ChangeUp;
}
LastChange=millis(); // Reset the time of the last change
}
if (WaveSync)
{
return NewSpeed;
}
else
{
return AntiSpeed;
}
}
Re: Portal not showing correct info
I think you need this:
Code: Select all
ReefAngel.DCPump.UseMemory = true;
Roberto.
Re: Portal not showing correct info
Replaced false with true but nothing changed.rimai wrote:I think you need this:Code: Select all
ReefAngel.DCPump.UseMemory = true;
Re: Portal not showing correct info
is the DC Pump area in portal static or dynamic? Mine shows ReefCrest Speed 100%. Is it supposed to show what mode and the max speed are onlly? or update and show current pump speed?
Re: Portal not showing correct info
Its based on the memory setting not the current speed or mode unless you are using memory