wp40 codes

Expansion modules and attachments
Post Reply
jjdezek
Posts: 329
Joined: Fri May 17, 2013 1:35 pm

wp40 codes

Post by jjdezek »

im looking for different codes for the wp40 that i can toggle between, like nutrient export, reef crest and so on. right now i have one mode but i would like to have a few to switch between.
Image
ReeferBee
Posts: 55
Joined: Wed May 08, 2013 6:23 pm
Location: North GA

Re: wp40 codes

Post by ReeferBee »

Here's mine

Code: Select all

    if (hour()>=8 && hour()<12)
{
  ReefAngel.PWM.SetDaylight( TidalSwellMode(60,true) ); // Tidal Swell at 60% on sync mode
  ReefAngel.PWM.SetActinic( TidalSwellMode(60,false) ); // Tidal Swell at 60% on anti-sync mode
}
else if (hour()>=12 && hour()<16)
{
  ReefAngel.PWM.SetDaylight( ReefCrestMode(80,20,true) ); // ReefCrest at 80% + - 20 on sync mode
  ReefAngel.PWM.SetActinic( ReefCrestMode(80,20,false) ); // ReefCrest at 80% + - 20 on anti-sync mode
}
else if (hour()>=16 && hour()<17)
{
  ReefAngel.PWM.SetDaylight( NutrientTransportMode(75,90,2000,true) ); // Nutrient Transport on sync mode
  ReefAngel.PWM.SetActinic( NutrientTransportMode(75,90,2000,false) ); // Nutrient Transport on anti-sync mode
}
else if (hour()>=17 && hour()<20)
{
  ReefAngel.PWM.SetDaylight( ReefCrestMode(80,20,true) ); // ReefCrest at 75% + - 20 on sync mode
  ReefAngel.PWM.SetActinic( ReefCrestMode(80,20,false) ); // ReefCrest at 75% + - 20 on anti-sync mode
}
else if (hour()>=20 && hour()<24)
{
  ReefAngel.PWM.SetDaylight( TidalSwellMode(60,true) ); // Tidal Swell at 60% on sync mode
  ReefAngel.PWM.SetActinic( TidalSwellMode(60,false) ); // Tidal Swell at 60% on anti-sync mode
}
else
{
  ReefAngel.PWM.SetDaylight( LongPulseMode(0,40,10,true) ); // Long pulse at 40% with 10s pulse on sync mode
  ReefAngel.PWM.SetActinic( LongPulseMode(0,40,10,false) ); // Long pulse at 40% with 10s pulse on anti sync mode
Barry

Current tank info: 150g mixed reef

"Some of the worst mistakes of my life were hair cuts" -Jim Morrison
jjdezek
Posts: 329
Joined: Fri May 17, 2013 1:35 pm

Re: wp40 codes

Post by jjdezek »

So with that you can manually switch between the two modes?
Image
jjdezek
Posts: 329
Joined: Fri May 17, 2013 1:35 pm

Re: wp40 codes

Post by jjdezek »

thats not working for me...it gives me an error outside that code, but without that code it runs fine. you have that running on your system?
Image
ReeferBee
Posts: 55
Joined: Wed May 08, 2013 6:23 pm
Location: North GA

Re: wp40 codes

Post by ReeferBee »

You cannot change the modes on the fly with this code. It just runs different modes thoughout the day. I believe someone has code where you can change modes on the menu screen.

I am running this, are you putting it in the right spot?
Barry

Current tank info: 150g mixed reef

"Some of the worst mistakes of my life were hair cuts" -Jim Morrison
jjdezek
Posts: 329
Joined: Fri May 17, 2013 1:35 pm

Re: wp40 codes

Post by jjdezek »

i put it between the post custom code below / above here
Image
ReeferBee
Posts: 55
Joined: Wed May 08, 2013 6:23 pm
Location: North GA

Re: wp40 codes

Post by ReeferBee »

That's right. Strange

Code: Select all


    ////// Place your custom code below here
    if (hour()>=8 && hour()<12)
{
  ReefAngel.PWM.SetDaylight( TidalSwellMode(60,true) ); // Tidal Swell at 60% on sync mode
  ReefAngel.PWM.SetActinic( TidalSwellMode(60,false) ); // Tidal Swell at 60% on anti-sync mode
}
else if (hour()>=12 && hour()<16)
{
  ReefAngel.PWM.SetDaylight( ReefCrestMode(80,20,true) ); // ReefCrest at 80% + - 20 on sync mode
  ReefAngel.PWM.SetActinic( ReefCrestMode(80,20,false) ); // ReefCrest at 80% + - 20 on anti-sync mode
}
else if (hour()>=16 && hour()<17)
{
  ReefAngel.PWM.SetDaylight( NutrientTransportMode(75,90,2000,true) ); // Nutrient Transport on sync mode
  ReefAngel.PWM.SetActinic( NutrientTransportMode(75,90,2000,false) ); // Nutrient Transport on anti-sync mode
}
else if (hour()>=17 && hour()<20)
{
  ReefAngel.PWM.SetDaylight( ReefCrestMode(80,20,true) ); // ReefCrest at 75% + - 20 on sync mode
  ReefAngel.PWM.SetActinic( ReefCrestMode(80,20,false) ); // ReefCrest at 75% + - 20 on anti-sync mode
}
else if (hour()>=20 && hour()<24)
{
  ReefAngel.PWM.SetDaylight( TidalSwellMode(60,true) ); // Tidal Swell at 60% on sync mode
  ReefAngel.PWM.SetActinic( TidalSwellMode(60,false) ); // Tidal Swell at 60% on anti-sync mode
}
else
{
  ReefAngel.PWM.SetDaylight( LongPulseMode(0,40,10,true) ); // Long pulse at 40% with 10s pulse on syncy mode
  ReefAngel.PWM.SetActinic( LongPulseMode(0,40,10,false) ); // Long pulse at 40% with 10s pulse on on anti-sync mode
}  

    ////// Place your custom code above here

    // This should always be the last line
    ReefAngel.ShowInterface();
}
Barry

Current tank info: 150g mixed reef

"Some of the worst mistakes of my life were hair cuts" -Jim Morrison
jjdezek
Posts: 329
Joined: Fri May 17, 2013 1:35 pm

Re: wp40 codes

Post by jjdezek »

on this code what is the pump running at? i want the max to be 100%, is it saying the max is 75 or 90?

Code: Select all

{
  ReefAngel.PWM.SetDaylight( NutrientTransportMode(75,90,2000,true) ); // Nutrient Transport on sync mode
  ReefAngel.PWM.SetActinic( NutrientTransportMode(75,90,2000,false) ); // Nutrient Transport on anti-sync mode
}
Image
User avatar
lnevo
Posts: 5430
Joined: Fri Jul 20, 2012 9:42 am

Re: wp40 codes

Post by lnevo »

Min 75
Max 90
jjdezek
Posts: 329
Joined: Fri May 17, 2013 1:35 pm

Re: wp40 codes

Post by jjdezek »

ok thanks.
Image
cgonser
Posts: 45
Joined: Mon Feb 25, 2013 3:54 pm
Location: Savannah, GA

Re: wp40 codes

Post by cgonser »

Got my 2 wp-40s up and running, is there a way to get them to go to half power in the evening? Kind of like a night mode? Here is my code....

Code: Select all

#include <ReefAngel_Features.h>
#include <Globals.h>
#include <RA_Wifi.h>
#include <Wire.h>
#include <OneWire.h>
#include <Time.h>
#include <DS1307RTC.h>
#include <InternalEEPROM.h>
#include <RA_NokiaLCD.h>
#include <RA_ATO.h>
#include <RA_Joystick.h>
#include <LED.h>
#include <RA_TempSensor.h>
#include <Relay.h>
#include <RA_PWM.h>
#include <Timer.h>
#include <Memory.h>
#include <InternalEEPROM.h>
#include <RA_Colors.h>
#include <RA_CustomColors.h>
#include <Salinity.h>
#include <RF.h>
#include <IO.h>
#include <ORP.h>
#include <AI.h>
#include <PH.h>
#include <WaterLevel.h>
#include <Humidity.h>
#include <DCPump.h>
#include <ReefAngel.h>

////// Place global variable code below here


////// Place global variable code above here


void setup()
{
    // This must be the first line
    ReefAngel.Init();  //Initialize controller
    // Ports toggled in Feeding Mode
    ReefAngel.FeedingModePorts = 0;
    // Ports toggled in Water Change Mode
    ReefAngel.WaterChangePorts = 0;
    // Ports toggled when Lights On / Off menu entry selected
    ReefAngel.LightsOnPorts = Port4Bit | Port8Bit;
    // Ports turned off when Overheat temperature exceeded
    ReefAngel.OverheatShutoffPorts = 0;
    // Use T1 probe as temperature and overheat functions
    ReefAngel.TempProbe = T1_PROBE;
    ReefAngel.OverheatProbe = T1_PROBE;

    // Feeeding and Water Change mode speed
    ReefAngel.DCPump.FeedingSpeed=0;
    ReefAngel.DCPump.WaterChangeSpeed=0;


    // Ports that are always on
    ReefAngel.Relay.On( Port4 );
    ReefAngel.Relay.On( Port5 );
    ReefAngel.Relay.On( Port6 );
    ReefAngel.Relay.On( Port7 );

    ////// Place additional initialization code below here
    

    ////// Place additional initialization code above here
}

void loop()
{
    ReefAngel.SingleATOLow( Port1 );
    ReefAngel.DayLights( Port2 );
    ReefAngel.StandardHeater( Port3 );
    ReefAngel.DayLights( Port8 );
    ReefAngel.PWM.DaylightPWMParabola();
    ReefAngel.PWM.ActinicPWMParabola();
    ReefAngel.DCPump.UseMemory = true;
    ReefAngel.DCPump.DaylightChannel = None;
    ReefAngel.DCPump.ActinicChannel = None;
    ReefAngel.DCPump.ExpansionChannel[0] = Sync;
    ReefAngel.DCPump.ExpansionChannel[1] = AntiSync;
    ReefAngel.DCPump.ExpansionChannel[2] = None;
    ReefAngel.DCPump.ExpansionChannel[3] = None;
    ReefAngel.DCPump.ExpansionChannel[4] = None;
    ReefAngel.DCPump.ExpansionChannel[5] = None;
    ////// Place your custom code below here
    

    ////// Place your custom code above here

    // This should always be the last line
    ReefAngel.Portal( "cgonser" );
    ReefAngel.ShowInterface();
}

void DrawCustomMain()
{
    int x,y;
    char text[10];
    // Dimming Expansion
    x = 15;
    y = 2;
    for ( int a=0;a<6;a++ )
    {
      if ( a>2 ) x = 75;
      if ( a==3 ) y = 2;
      ReefAngel.LCD.DrawText( COLOR_BLUE,DefaultBGColor,x,y,"Ch :" );
      ReefAngel.LCD.DrawText( COLOR_BLUE,DefaultBGColor,x+12,y,a );
      ReefAngel.LCD.DrawText( COLOR_BLUE,DefaultBGColor,x+24,y,ReefAngel.PWM.GetChannelValue(a) );
      y += 10;
    }
    pingSerial();

    // Parameters
#if defined DisplayLEDPWM && ! defined RemoveAllLights
    ReefAngel.LCD.DrawMonitor( 15, 43, ReefAngel.Params,
    ReefAngel.PWM.GetDaylightValue(), ReefAngel.PWM.GetActinicValue() );
#else // defined DisplayLEDPWM && ! defined RemoveAllLights
    ReefAngel.LCD.DrawMonitor( 15, 43, ReefAngel.Params );
#endif // defined DisplayLEDPWM && ! defined RemoveAllLights
    pingSerial();

    // Main Relay Box
    byte TempRelay = ReefAngel.Relay.RelayData;
    TempRelay &= ReefAngel.Relay.RelayMaskOff;
    TempRelay |= ReefAngel.Relay.RelayMaskOn;
    ReefAngel.LCD.DrawOutletBox( 12, 84, TempRelay );
    pingSerial();

    // Date and Time
    ReefAngel.LCD.DrawDate( 6, 122 );
    pingSerial();
}

void DrawCustomGraph()
{
}
Post Reply