Page 1 of 1

Wifi Error

Posted: Mon Jan 27, 2014 5:49 am
by deputy1234
Hi,

I have having trouble setting up my wifi.

I am able to connect to to the wifi attachment using wifi utility. However when trying to set up wifi attachment in wifi utility, I always get an error message.

** ERROR - Please disconnect and then reconnect the Reef Angel Wifi Attachment from the USB-TTL cable and try again.

Can some help?

Thanks

Re: Wifi Error

Posted: Mon Jan 27, 2014 9:08 am
by rimai
Did you choose the correct serial port?
Is the wifi attachment plugged into the usb cable properly, with the black wire to the right?
Is the module blinking green and blue?

Re: Wifi Error

Posted: Mon Jan 27, 2014 1:05 pm
by deputy1234
rimai wrote:diid you choose the correct serial port?
Is the wifi attachment plugged into the usb cable properly, with the black wire to the right?
Is the module blinking green and blue?
There is only one opion to select. COM 4
Yes,. the wire is connected correctly.
Yes both blue and green ( looks a alittle yellow) are blinking quickly.

Re: Wifi Error

Posted: Mon Jan 27, 2014 1:33 pm
by rimai
Can you paste the entire log?
Click the button "Copy to Clipboard"

Re: Wifi Error

Posted: Mon Jan 27, 2014 3:37 pm
by deputy1234
rimai wrote:Can you paste the entire log?
Click the button "Copy to Clipboard"

Opening Serial Port...
Verifying speed at 9600 baud
Connected to serial port COM4
> $$$
< CMD
> set u b 57600
< set u b 57600
< AOK
< <4.41>
> set s p 0
> save
> reboot
Verifying speed at 57600 baud
Removing connection to COM4
Connected to serial port COM4
> $$$
< CMD
Wifi is communicating at 57600 baud rate

> reboot
< reboot
Removing connection to COM4
---------------------------------------------------------------------
Wifi Attachment Connected to COM4
---------------------------------------------------------------------

Opening Serial Port...
Connected to serial port COM4
> $$$
< CMD
> ls
< ls
<
< FL# SIZ FLAGS
< 2 86328 3 wifly-GSX-400
< 4 74920 3 web_app-GSX-106
< 7 46632 3 wps_app-GSX-131
< 9 66240 3 eap_app-GSX-101
< 11 37282 0 web_config.html
< 21 512 0 link.html
< 22 7268 0 logo.png
< 24 1052 10 config
< 25 944 10 user
< 26 88548 3 wifly-GSX-441-r1057
<
< 145 Free, Boot=26, Backup=2
< <4.41>
> load user
< load user
< AOK
< <4.41>
> save
< save
< Storing in config
< *BAD CONFIG*
< <4.41>
> save
< save
< Storing in config
< *BAD CONFIG*
< <4.41>
> set o d ReefAngelWifi
< set o d ReefAngelWifi
< AOK
< <4.41>
> set w l 5
< set w l 5
< AOK
< <4.41>
> set w s Dhouse
< set w s Dhouse
< AOK
< <4.41>
> set w p ********
< set w p ********
< AOK
< <4.41>
> set w k 00000000000000000000000000
< set w k 00000000000000000000000000
< AOK
< <4.41>
> set ftp address 198.175.253.161
< set ftp address 198.175.253.161
< AOK
< <4.41>
> save
< save
< Storing in config
< *BAD CONFIG*
< <4.41>
> reboot
< reboot
> $$$
** ERROR - Please disconnect and then reconnect the Reef Angel Wifi Attachment from the USB-TTL cable and try again.

Removing connection to COM4

Re: Wifi Error

Posted: Mon Jan 27, 2014 4:19 pm
by rimai
Where did you get that module?

Re: Wifi Error

Posted: Mon Jan 27, 2014 4:34 pm
by deputy1234
rimai wrote:Where did you get that module?
I ordered the controller and wifi on January 16, 2014

Re: Wifi Error

Posted: Mon Jan 27, 2014 4:41 pm
by rimai
That's so weird....
There was no module sold with that firmware 4.41
Did you update yourself?
Try factory reset and do it again.

Re: Wifi Error

Posted: Mon Jan 27, 2014 5:19 pm
by deputy1234
rimai wrote:That's so weird....
There was no module sold with that firmware 4.41
Did you update yourself?
Try factory reset and do it again.

how would I factory reset?

Yes I did try to update. Could this be the problem?

Re: Wifi Error

Posted: Mon Jan 27, 2014 5:30 pm
by deputy1234
I tried doing a factory rest using the wifi Utility but was no luck. Still got the error message.

Re: Wifi Error

Posted: Mon Jan 27, 2014 5:32 pm
by rimai
Can you paste the log of the factory reset?

Re: Wifi Error

Posted: Mon Jan 27, 2014 5:51 pm
by deputy1234
rimai wrote:Can you paste the log of the factory reset?

Opening Serial Port...
Verifying speed at 9600 baud
Connected to serial port COM4
> $$$
< CMD
> set u b 57600
< set u b 57600
< AOK
< <4.41>
> set s p 0
> save
> reboot
Verifying speed at 57600 baud
Removing connection to COM4
Connected to serial port COM4
> $$$
< CMD
Wifi is communicating at 57600 baud rate

> reboot
< reboot
Removing connection to COM4
---------------------------------------------------------------------
Wifi Attachment Connected to COM4
---------------------------------------------------------------------

Opening Serial Port...
Connected to serial port COM4
> $$$
< CMD
> ls
< ls
<
< FL# SIZ FLAGS
< 2 86328 3 wifly-GSX-400
< 4 74920 3 web_app-GSX-106
< 7 46632 3 wps_app-GSX-131
< 9 66240 3 eap_app-GSX-101
< 11 37282 0 web_config.html
< 21 512 0 link.html
< 22 7268 0 logo.png
< 24 1052 10 config
< 25 944 10 user
< 26 88548 3 wifly-GSX-441-r1057
<
< 145 Free, Boot=26, Backup=2
< <4.41>
> load user
< load user
< AOK
< <4.41>
> save
< save
< Storing in config
< *BAD CONFIG*
< <4.41>
> save
< save
< Storing in config
< *BAD CONFIG*
< <4.41>
> set o d ReefAngelWifi
< set o d ReefAngelWifi
< AOK
< <4.41>
> set w l 5
< set w l 5
< AOK
< <4.41>
> set w s Dhouse
< set w s Dhouse
< AOK
< <4.41>
> set w p 5198545981
< set w p 5198545981
< AOK
< <4.41>
> set w k 00000000000000000000000000
< set w k 00000000000000000000000000
< AOK
< <4.41>
> set ftp address 198.175.253.161
< set ftp address 198.175.253.161
< AOK
< <4.41>
> save
< save
< Storing in config
< *BAD CONFIG*
< <4.41>
> reboot
< reboot
> $$$
** ERROR - Please disconnect and then reconnect the Reef Angel Wifi Attachment from the USB-TTL cable and try again.

Removing connection to COM4
Opening Serial Port...
Verifying speed at 9600 baud
Connected to serial port COM4
> $$$
< CMD
> set u b 57600
< set u b 57600
< AOK
< <4.41>
> set s p 0
> save
< <4.41>
> reboot
Verifying speed at 57600 baud
Removing connection to COM4
Connected to serial port COM4
> $$$
< CMD
Wifi is communicating at 57600 baud rate

> reboot
< reboot
Removing connection to COM4
---------------------------------------------------------------------
Wifi Attachment Connected to COM4
---------------------------------------------------------------------

Opening Serial Port...
Connected to serial port COM4
> $$$
< CMD
> ls
< ls
<
< FL# SIZ FLAGS
< 2 86328 3 wifly-GSX-400
< 4 74920 3 web_app-GSX-106
< 7 46632 3 wps_app-GSX-131
< 9 66240 3 eap_app-GSX-101
< 11 37282 0 web_config.html
< 21 512 0 link.html
< 22 7268 0 logo.png
< 24 1052 10 config
< 25 944 10 user
< 26 88548 3 wifly-GSX-441-r1057
<
< 145 Free, Boot=26, Backup=2
< <4.41>
> load user
< load user
< AOK
< <4.41>
> save
< save
< Storing in config
< *BAD CONFIG*
< <4.41>
> save
< save
< Storing in config
< *BAD CONFIG*
< <4.41>
> set o d ReefAngelWifi
< set o d ReefAngelWifi
< AOK
< <4.41>
> set w l 5
< set w l 5
< AOK
< <4.41>
> set w s Dhouse
< set w s Dhouse
< AOK
< <4.41>
> set w p 5198545981
< set w p 5198545981
< AOK
< <4.41>
> set w k 00000000000000000000000000
< set w k 00000000000000000000000000
< AOK
< <4.41>
> set ftp address 198.175.253.161
< set ftp address 198.175.253.161
< AOK
< <4.41>
> save
< save
< Storing in config
< *BAD CONFIG*
< <4.41>
> reboot
< reboot
> $$$
** ERROR - Please disconnect and then reconnect the Reef Angel Wifi Attachment from the USB-TTL cable and try again.

Removing connection to COM4
Opening Serial Port...
Verifying speed at 9600 baud
Connected to serial port COM4
> $$$
> set u b 57600
> set s p 0
> save
> reboot
Verifying speed at 57600 baud
Removing connection to COM4
Connected to serial port COM4
> $$$
< CMD
Wifi is communicating at 57600 baud rate

> reboot
< reboot
Removing connection to COM4
---------------------------------------------------------------------
Wifi Attachment Connected to COM4
---------------------------------------------------------------------

Opening Serial Port...
Connected to serial port COM4
> $$$
< CMD
> factory RESET
< factory RESET
< Set Factory Defaults
> reboot
< <4.41>
< reboot
Removing connection to COM4
---------------------------------------------------------------------
Factory Settings Restored
---------------------------------------------------------------------

Opening Serial Port...
Verifying speed at 9600 baud
Connected to serial port COM4
> $$$
> set u b 57600
> set s p 0
> save
> reboot
Verifying speed at 57600 baud
Removing connection to COM4
Connected to serial port COM4
> $$$
< CMD
Wifi is communicating at 57600 baud rate

> reboot
< reboot
Removing connection to COM4
---------------------------------------------------------------------
Wifi Attachment Connected to COM4
---------------------------------------------------------------------

Opening Serial Port...
Connected to serial port COM4
> $$$
< CMD
> ls
< ls
<
< FL# SIZ FLAGS
< 2 86328 3 wifly-GSX-400
< 4 74920 3 web_app-GSX-106
< 7 46632 3 wps_app-GSX-131
< 9 66240 3 eap_app-GSX-101
< 11 37282 0 web_config.html
< 21 512 0 link.html
< 22 7268 0 logo.png
< 24 1052 10 config
< 25 944 10 user
< 26 88548 3 wifly-GSX-441-r1057
<
< 145 Free, Boot=26, Backup=2
< <4.41>
> load user
< load user
< AOK
< <4.41>
> save
< save
< Storing in config
< *BAD CONFIG*
< <4.41>
> save
< save
< Storing in config
< *BAD CONFIG*
< <4.41>
> set o d ReefAngelWifi
< set o d ReefAngelWifi
< AOK
< <4.41>
> set w l 5
< set w l 5
< AOK
< <4.41>
> set w s Dhouse
< set w s Dhouse
< AOK
< <4.41>
> set w p 5198545981
< set w p 5198545981
< AOK
< <4.41>
> set w k 00000000000000000000000000
< set w k 00000000000000000000000000
< AOK
< <4.41>
> set ftp address 198.175.253.161
< set ftp address 198.175.253.161
< AOK
< <4.41>
> save
< save
< Storing in config
< *BAD CONFIG*
< <4.41>
> reboot
< reboot
> $$$
** ERROR - Please disconnect and then reconnect the Reef Angel Wifi Attachment from the USB-TTL cable and try again.

Removing connection to COM4
Opening Serial Port...
Verifying speed at 9600 baud
Connected to serial port COM4
> $$$
< CMD
> set u b 57600
< set u b 57600
< AOK
< <4.41>
> set s p 0
> save
> reboot
Verifying speed at 57600 baud
Removing connection to COM4
Connected to serial port COM4
> $$$
< CMD
Wifi is communicating at 57600 baud rate

> reboot
< reboot
Removing connection to COM4
---------------------------------------------------------------------
Wifi Attachment Connected to COM4
---------------------------------------------------------------------

Opening Serial Port...
Connected to serial port COM4
> $$$
< CMD
> factory RESET
< factory RESET
< Set Factory Defaults
> reboot
< <4.41>
< reboot
Removing connection to COM4
---------------------------------------------------------------------
Factory Settings Restored
---------------------------------------------------------------------

Opening Serial Port...
Verifying speed at 9600 baud
Connected to serial port COM4
> $$$
> set u b 57600
> set s p 0
> save
> reboot
Verifying speed at 57600 baud
Removing connection to COM4
Connected to serial port COM4
> $$$
< CMD
Wifi is communicating at 57600 baud rate

> reboot
< reboot
Removing connection to COM4
---------------------------------------------------------------------
Wifi Attachment Connected to COM4
---------------------------------------------------------------------

Opening Serial Port...
Connected to serial port COM4
> $$$
< CMD
> ls
< ls
<
< FL# SIZ FLAGS
< 2 86328 3 wifly-GSX-400
< 4 74920 3 web_app-GSX-106
< 7 46632 3 wps_app-GSX-131
< 9 66240 3 eap_app-GSX-101
< 11 37282 0 web_config.html
< 21 512 0 link.html
< 22 7268 0 logo.png
< 24 1052 10 config
< 25 944 10 user
< 26 88548 3 wifly-GSX-441-r1057
<
< 145 Free, Boot=26, Backup=2
< <4.41>
> load user
< load user
< AOK
< <4.41>
> save
< save
< Storing in config
< *BAD CONFIG*
< <4.41>
> save
< save
< Storing in config
< *BAD CONFIG*
< <4.41>
> set o d ReefAngelWifi
< set o d ReefAngelWifi
< AOK
< <4.41>
> set w l 5
< set w l 5
< AOK
< <4.41>
> set w s Dhouse
< set w s Dhouse
< AOK
< <4.41>
> set w p 5198545981
< set w p 5198545981
< AOK
< <4.41>
> set w k 00000000000000000000000000
< set w k 00000000000000000000000000
< AOK
< <4.41>
> set ftp address 198.175.253.161
< set ftp address 198.175.253.161
< AOK
< <4.41>
> save
< save
< Storing in config
< *BAD CONFIG*
< <4.41>
> reboot
< reboot
> $$$
** ERROR - Please disconnect and then reconnect the Reef Angel Wifi Attachment from the USB-TTL cable and try again.

Removing connection to COM4
Opening Serial Port...
Verifying speed at 9600 baud
Connected to serial port COM4
> $$$
< CMD
> set u b 57600
< set u b 57600
< AOK
< <4.41>
> set s p 0
> save
> reboot
Verifying speed at 57600 baud
Removing connection to COM4
Connected to serial port COM4
> $$$
< CMD
Wifi is communicating at 57600 baud rate

> reboot
< reboot
Removing connection to COM4
---------------------------------------------------------------------
Wifi Attachment Connected to COM4
---------------------------------------------------------------------

Opening Serial Port...
Connected to serial port COM4
> $$$
< CMD
> ls
< ls
<
< FL# SIZ FLAGS
< 2 86328 3 wifly-GSX-400
< 4 74920 3 web_app-GSX-106
< 7 46632 3 wps_app-GSX-131
< 9 66240 3 eap_app-GSX-101
< 11 37282 0 web_config.html
< 21 512 0 link.html
< 22 7268 0 logo.png
< 24 1052 10 config
< 25 944 10 user
< 26 88548 3 wifly-GSX-441-r1057
<
< 145 Free, Boot=26, Backup=2
< <4.41>
> load user
< load user
< AOK
< <4.41>
> save
< save
< Storing in config
< *BAD CONFIG*
< <4.41>
> save
< save
< Storing in config
< *BAD CONFIG*
< <4.41>
> set o d ReefAngelWifi
< set o d ReefAngelWifi
< AOK
< <4.41>
> set w l 5
< set w l 5
< AOK
< <4.41>
> set w s Dhouse
< set w s Dhouse
< AOK
< <4.41>
> set w p 5198545981
< set w p 5198545981
< AOK
< <4.41>
> set w k 00000000000000000000000000
< set w k 00000000000000000000000000
< AOK
< <4.41>
> set ftp address 198.175.253.161
< set ftp address 198.175.253.161
< AOK
< <4.41>
> save
< save
< Storing in config
< *BAD CONFIG*
< <4.41>
> reboot
< reboot
> $$$
** ERROR - Please disconnect and then reconnect the Reef Angel Wifi Attachment from the USB-TTL cable and try again.

Removing connection to COM4
Opening Serial Port...
Verifying speed at 9600 baud
Connected to serial port COM4
> $$$
< CMD
> set u b 57600
< set u b 57600
< AOK
< <4.41>
> set s p 0
> save
> reboot
Verifying speed at 57600 baud
Removing connection to COM4
Connected to serial port COM4
> $$$
< CMD
Wifi is communicating at 57600 baud rate

> reboot
< reboot
Removing connection to COM4
---------------------------------------------------------------------
Wifi Attachment Connected to COM4
---------------------------------------------------------------------

Opening Serial Port...
Connected to serial port COM4
> $$$
< CMD
> ls
< ls
<
< FL# SIZ FLAGS
< 2 86328 3 wifly-GSX-400
< 4 74920 3 web_app-GSX-106
< 7 46632 3 wps_app-GSX-131
< 9 66240 3 eap_app-GSX-101
< 11 37282 0 web_config.html
< 21 512 0 link.html
< 22 7268 0 logo.png
< 24 1052 10 config
< 25 944 10 user
< 26 88548 3 wifly-GSX-441-r1057
<
< 145 Free, Boot=26, Backup=2
< <4.41>
> load user
< load user
< AOK
< <4.41>
> save
< save
< Storing in config
< *BAD CONFIG*
< <4.41>
> save
< save
< Storing in config
< *BAD CONFIG*
< <4.41>
> set o d ReefAngelWifi
< set o d ReefAngelWifi
< AOK
< <4.41>
> set w l 5
< set w l 5
< AOK
< <4.41>
> set w s Dhouse
< set w s Dhouse
< AOK
< <4.41>
> set w p 5198545981
< set w p 5198545981
< AOK
< <4.41>
> set w k 00000000000000000000000000
< set w k 00000000000000000000000000
< AOK
< <4.41>
> set ftp address 198.175.253.161
< set ftp address 198.175.253.161
< AOK
< <4.41>
> save
< save
< Storing in config
< *BAD CONFIG*
< <4.41>
> reboot
< reboot
> $$$
** ERROR - Please disconnect and then reconnect the Reef Angel Wifi Attachment from the USB-TTL cable and try again.

Removing connection to COM4
Opening Serial Port...
Verifying speed at 9600 baud
Connected to serial port COM4
> $$$
< CMD
> set u b 57600
< set u b 57600
< AOK
< <4.41>
> set s p 0
> save
> reboot
Verifying speed at 57600 baud
Removing connection to COM4
Connected to serial port COM4
> $$$
< CMD
Wifi is communicating at 57600 baud rate

> reboot
< reboot
Removing connection to COM4
---------------------------------------------------------------------
Wifi Attachment Connected to COM4
---------------------------------------------------------------------

Opening Serial Port...
Connected to serial port COM4
> $$$
< CMD
> factory RESET
< factory RESET
< Set Factory Defaults
> reboot
< <4.41>
< reboot
Removing connection to COM4
---------------------------------------------------------------------
Factory Settings Restored
---------------------------------------------------------------------

Opening Serial Port...
Verifying speed at 9600 baud
Connected to serial port COM4
> $$$
> set u b 57600
> set s p 0
> save
> reboot
Verifying speed at 57600 baud
Removing connection to COM4
Connected to serial port COM4
> $$$
< CMD
Wifi is communicating at 57600 baud rate

> reboot
< reboot
Removing connection to COM4
---------------------------------------------------------------------
Wifi Attachment Connected to COM4
---------------------------------------------------------------------

Opening Serial Port...
Connected to serial port COM4
> $$$
< CMD
> ls
< ls
<
< FL# SIZ FLAGS
< 2 86328 3 wifly-GSX-400
< 4 74920 3 web_app-GSX-106
< 7 46632 3 wps_app-GSX-131
< 9 66240 3 eap_app-GSX-101
< 11 37282 0 web_config.html
< 21 512 0 link.html
< 22 7268 0 logo.png
< 24 1052 10 config
< 25 944 10 user
< 26 88548 3 wifly-GSX-441-r1057
<
< 145 Free, Boot=26, Backup=2
< <4.41>
> load user
< load user
< AOK
< <4.41>
> save
< save
< Storing in config
< *BAD CONFIG*
< <4.41>
> save
< save
< Storing in config
< *BAD CONFIG*
< <4.41>
> set o d ReefAngelWifi
< set o d ReefAngelWifi
< AOK
< <4.41>
> set w l 5
< set w l 5
< AOK
< <4.41>
> set w s Dhouse
< set w s Dhouse
< AOK
< <4.41>
> set w p 5198545981
< set w p 5198545981
< AOK
< <4.41>
> set w k 00000000000000000000000000
< set w k 00000000000000000000000000
< AOK
< <4.41>
> set ftp address 198.175.253.161
< set ftp address 198.175.253.161
< AOK
< <4.41>
> save
< save
< Storing in config
< *BAD CONFIG*
< <4.41>
> reboot
< reboot
> $$$
** ERROR - Please disconnect and then reconnect the Reef Angel Wifi Attachment from the USB-TTL cable and try again.

Removing connection to COM4
Opening Serial Port...
Verifying speed at 9600 baud
Connected to serial port COM4
> $$$
< CMD
> set u b 57600
< set u b 57600
< AOK
< <4.41>
> set s p 0
> save
< <4.41>
> reboot
Verifying speed at 57600 baud
Removing connection to COM4
Connected to serial port COM4
> $$$
< CMD
Wifi is communicating at 57600 baud rate

> reboot
< reboot
Removing connection to COM4
---------------------------------------------------------------------
Wifi Attachment Connected to COM4
---------------------------------------------------------------------

Opening Serial Port...
Connected to serial port COM4
> $$$
< CMD
> factory RESET
< factory RESET
< Set Factory Defaults
> reboot
< <4.41>
< reboot
Removing connection to COM4
---------------------------------------------------------------------
Factory Settings Restored
---------------------------------------------------------------------

Opening Serial Port...
Verifying speed at 9600 baud
Connected to serial port COM4
> $$$
> set u b 57600
> set s p 0
> save
> reboot
Verifying speed at 57600 baud
Removing connection to COM4
Connected to serial port COM4
> $$$
< CMD
Wifi is communicating at 57600 baud rate

> reboot
< reboot
Removing connection to COM4
---------------------------------------------------------------------
Wifi Attachment Connected to COM4
---------------------------------------------------------------------

Opening Serial Port...
Connected to serial port COM4
> $$$
** ERROR - Please disconnect and then reconnect the Reef Angel Wifi Attachment from the USB-TTL cable and try again.

Removing connection to COM4
Opening Serial Port...
Verifying speed at 9600 baud
Connected to serial port COM4
> $$$
< CMD
> set u b 57600
< set u b 57600
< AOK
< <4.41>
> set s p 0
> save
> reboot
Verifying speed at 57600 baud
Removing connection to COM4
Connected to serial port COM4
> $$$
< CMD
Wifi is communicating at 57600 baud rate

> reboot
< reboot
Removing connection to COM4
---------------------------------------------------------------------
Wifi Attachment Connected to COM4
---------------------------------------------------------------------

Opening Serial Port...
Connected to serial port COM4
> $$$
< CMD
> ls
< ls
<
< FL# SIZ FLAGS
< 2 86328 3 wifly-GSX-400
< 4 74920 3 web_app-GSX-106
< 7 46632 3 wps_app-GSX-131
< 9 66240 3 eap_app-GSX-101
< 11 37282 0 web_config.html
< 21 512 0 link.html
< 22 7268 0 logo.png
< 24 1052 10 config
< 25 944 10 user
< 26 88548 3 wifly-GSX-441-r1057
<
< 145 Free, Boot=26, Backup=2
< <4.41>
> load user
< load user
< AOK
< <4.41>
> save
< save
< Storing in config
< *BAD CONFIG*
< <4.41>
> save
< save
< Storing in config
< *BAD CONFIG*
< <4.41>
> set o d ReefAngelWifi
< set o d ReefAngelWifi
< AOK
< <4.41>
> set w l 5
< set w l 5
< AOK
< <4.41>
> set w s Dhouse
< set w s Dhouse
< AOK
< <4.41>
> set w p 5198545981
< set w p 5198545981
< AOK
< <4.41>
> set w k 00000000000000000000000000
< set w k 00000000000000000000000000
< AOK
< <4.41>
> set ftp address 198.175.253.161
< set ftp address 198.175.253.161
< AOK
< <4.41>
> save
< save
< Storing in config
< *BAD CONFIG*
< <4.41>
> reboot
< reboot
> $$$
** ERROR - Please disconnect and then reconnect the Reef Angel Wifi Attachment from the USB-TTL cable and try again.

Removing connection to COM4
Opening Serial Port...
Verifying speed at 9600 baud
Connected to serial port COM4
> $$$
< CMD
> set u b 57600
< set u b 57600
< AOK
< <4.41>
> set s p 0
> save
> reboot
Verifying speed at 57600 baud
Removing connection to COM4
Connected to serial port COM4
> $$$
< CMD
Wifi is communicating at 57600 baud rate

> reboot
< reboot
Removing connection to COM4
---------------------------------------------------------------------
Wifi Attachment Connected to COM4
---------------------------------------------------------------------

Opening Serial Port...
Connected to serial port COM4
> $$$
< CMD
> factory RESET
< factory RESET
< Set Factory Defaults
> reboot
< <4.41>
< reboot
Removing connection to COM4
---------------------------------------------------------------------
Factory Settings Restored
---------------------------------------------------------------------

Opening Serial Port...
Verifying speed at 9600 baud
Connected to serial port COM4
> $$$
> set u b 57600
> set s p 0
> save
> reboot
Verifying speed at 57600 baud
Removing connection to COM4
Connected to serial port COM4
> $$$
< CMD
Wifi is communicating at 57600 baud rate

> reboot
< reboot
Removing connection to COM4
---------------------------------------------------------------------
Wifi Attachment Connected to COM4
---------------------------------------------------------------------

Opening Serial Port...
Connected to serial port COM4
> $$$
< CMD
> factory RESET
< factory RESET
< Set Factory Defaults
> reboot
< <4.41>
< reboot
Removing connection to COM4
---------------------------------------------------------------------
Factory Settings Restored
---------------------------------------------------------------------

Re: Wifi Error

Posted: Mon Jan 27, 2014 7:11 pm
by rimai
How did you update the firmware?

Re: Wifi Error

Posted: Mon Jan 27, 2014 7:25 pm
by deputy1234
rimai wrote:How did you update the firmware?
I updated the firmware through wifi Utility but received the error message ** ERROR - Please disconnect and then reconnect the Reef Angel Wifi Attachment from the USB-TTL cable and try again.

Re: Wifi Error

Posted: Tue Jan 28, 2014 9:50 am
by rimai
Are you sure that you are using the correct SSID and passphrase? They are case sensitive, so uppercase and lowercase matters.
The update firmware button is not working.
What's making me confused is the fact that in order to update firmware, you must be connected to wifi in the first place. So, even if the button was working, there would be no way to download new firmware.
Unless you had it connected. Was the unit ever connected to the internet before?
Did you ever connect to the module using teraterm or putty?
I think we need to wipe out the config file and start from scratch.
I need to update one of my units to see how to do that.

Re: Wifi Error

Posted: Tue Jan 28, 2014 11:18 am
by deputy1234
rimai wrote:Are you sure that you are using the correct SSID and passphrase? They are case sensitive, so uppercase and lowercase matters.
The update firmware button is not working.
What's making me confused is the fact that in order to update firmware, you must be connected to wifi in the first place. So, even if the button was working, there would be no way to download new firmware.
Unless you had it connected. Was the unit ever connected to the internet before?
Did you ever connect to the module using teraterm or putty?
I think we need to wipe out the config file and start from scratch.
I need to update one of my units to see how to do that.

Yes the SSID and passphrase are correct.
I did have the wifi connected and then tried to update but received the error message.
I was able connect to teraterm. I tried it last nigh to factory reset but I was not sure how to.

Re: Wifi Error

Posted: Tue Jan 28, 2014 7:31 pm
by rimai
Ok, I was able to replicate the issue and it was definitely due to the firmware upgrade.
Let's try this:
You need to decompress the zip file.
Open the .ttl file in notepad or any other text editor.
Change the SSID and passphrase.
Save the file.
Use Tera Term and go to menu Control->Macro
Browse to the .ttl file you just edited.
It should configure the module at the end of the process.
If you don't get anything in the screen, you will need to change the baud rate before you open the .ttl file.
Go to menu Setup->Serial port and choose 57600 baud and then go to menu Control->Macro to open the .ttl file.
If that does not work for some reason, copy and paste what you get on the screen.

Re: Wifi Error

Posted: Wed Jan 29, 2014 7:54 am
by deputy1234
rimai wrote:Ok, I was able to replicate the issue and it was definitely due to the firmware upgrade.
Let's try this:
You need to decompress the zip file.
Open the .ttl file in notepad or any other text editor.
Change the SSID and passphrase.
Save the file.
Use Tera Term and go to menu Control->Macro
Browse to the .ttl file you just edited.
It should configure the module at the end of the process.
If you don't get anything in the screen, you will need to change the baud rate before you open the .ttl file.
Go to menu Setup->Serial port and choose 57600 baud and then go to menu Control->Macro to open the .ttl file.
If that does not work for some reason, copy and paste what you get on the screen.

Thank you for all your help Roberto!!! it's working!

Re: Wifi Error

Posted: Mon Feb 03, 2014 7:44 pm
by Drew471
Ok I am going to play the noob here. Do you need to setup using the wifi utility first or will this due the setup as well (so I should do the factory reset) . I follow the directions and I get a green blinking light meaning ip a dress ok.... What does that mean?

Sent from my SPH-L720 using Tapatalk

Re: Wifi Error

Posted: Mon Feb 03, 2014 7:48 pm
by rimai
It means you are good to go.
Don't update the firmware as it will cause you to have problems mentioned in this thread.

Re: Wifi Error

Posted: Wed Feb 12, 2014 5:11 pm
by AquaO
I have the same issue...
I tried to update firmware today and have exactly the same problem. My wifi works well for a year. I thought to do well when I make this "update" ;)

I will tried that is mentioned in this post...

Thank

Re: Wifi Error

Posted: Wed Feb 12, 2014 7:59 pm
by AquaO
It's back to work :D

Thank for this thread!!

Re: Wifi Error

Posted: Sat Apr 05, 2014 5:51 am
by JDP1130
looks like i have same issue and i am unable to use this wor work correctly. seems as though i cannot get code to push to wifi attachment.

Re: Wifi Error

Posted: Sat Apr 05, 2014 8:20 am
by rimai
Did you update the firmware?
Is the module blinking blue and green?
Can you paste the log from the wifi utility?

Re: Wifi Error

Posted: Mon Mar 27, 2017 11:00 am
by ahmed
i have same issue any idea?

Re: Wifi Error

Posted: Mon Aug 22, 2022 3:21 am
by Ferdi
Hi all, hope everyone is doing well. Im experiencing the same thing as everyone experienced back in 2012.

I followed all the steps in the thread with the file attached and it still doesn’t want to work.

I did change it ip,ssid and password to mine but still no luck.

Maybe there is a small simple thing im doing wrong that I can’t pick up.

Can i perhaps paste the code here and maybe someone might pick up what im totally missing?

Re: Wifi Error

Posted: Mon Aug 22, 2022 8:13 am
by rimai
Can you post the log of what you get on tera term?

Re: Wifi Error

Posted: Mon Aug 22, 2022 9:04 am
by Ferdi
There is no log.

A small window pops up for confirmation and shows that its running but after a while it asks again to configure and so it goes on the whole time

Re: Wifi Error

Posted: Mon Aug 22, 2022 9:16 am
by rimai
Your cable may be bad then