ORP question or a problem..

Expansion modules and attachments
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: ORP question or a problem..

Post by rimai »

Ok, let's keep an eye on it.
According to your log, it's been working since yesterday when you mentioned it was.
Roberto.
Armetas
Posts: 82
Joined: Sat Mar 29, 2014 1:55 pm

Re: ORP question or a problem..

Post by Armetas »

Yes let's keep an eye.
Image
Armetas
Posts: 82
Joined: Sat Mar 29, 2014 1:55 pm

Re: ORP question or a problem..

Post by Armetas »

I have same problem again. Tonight as I see by chart it started to show higher values and now I'm getting only 0 mv.

What I've tried:
1) Connect ph probe - readings ok
2) reboot device - nothing
3) turn of orp module - nothing
4) reconnect orp probe few times - nothing

I'm confused now... I need help...
Image
Armetas
Posts: 82
Joined: Sat Mar 29, 2014 1:55 pm

Re: ORP question or a problem..

Post by Armetas »

Maybe its time to replace ORP probe...Because I don't know what else could be..
Image
Barendvh
Posts: 19
Joined: Sun Feb 03, 2013 8:26 am
Location: Johannesburg

Re: ORP question or a problem..

Post by Barendvh »

Hi I have just installed my ORG module but cannot find where i set it up.

I selected it on the wizard but nothing comes up to set up the parameters.

Please can you help me.
Armetas
Posts: 82
Joined: Sat Mar 29, 2014 1:55 pm

Re: ORP question or a problem..

Post by Armetas »

Armetas wrote:Maybe its time to replace ORP probe...Because I don't know what else could be..
Ok, I got ORP replacement and now it works perfect without interruptions 8-)
Image
Post Reply