Wifi will not connect after firmware update
Re: Wifi will not connect after firmware update
so is this the way it should look if my wifi name is centurylink and no password
sendln 'centurylink'
sendln ' '
sendln 'centurylink'
sendln ' '
Re: Wifi will not connect after firmware update
Can someone confirm this is the right way to input program
Re: Wifi will not connect after firmware update
Is there anyone that checks this forum?
Re: Wifi will not connect after firmware update
no, this is not correct. in the previous post, Roberto gave the commands to issue the wifi name and password.lurch wrote:so is this the way it should look if my wifi name is centurylink and no password
sendln 'centurylink'
sendln ' '
Code: Select all
sendln 'set wlan ssid centurylink'
sendln 'set wlan pass '
I'm not positive about the no password though. I would have to look at the manual again.
Sent from my Moto X
Re: Wifi will not connect after firmware update
Thank you for your help. Do you have a link to the manual?
Re: Wifi will not connect after firmware update
no. it is on the roving network (www.rovingnetworks.com) website.lurch wrote:Thank you for your help. Do you have a link to the manual?
i just looked at the manual and it does not appear to allow for empty or no passphrase. you will need to change the encryption to be none or open and not use wpa2 if you do not want a passphrase. I have not played around with no passphrase to know the answer for you and that example is not in the manual.
Sent from my iPad mini
Re: Wifi will not connect after firmware update
Is there something we can do prior to going to 1.1.1 so this issue wont occur?
Re: Wifi will not connect after firmware update
I am trying to understand this so I am going to ask two questions that may seem extremely basic:
Why are all new WiFi adapters not sent with this already configured? Roberto just told me to do this procedure on a recently purchased, brand new WiFi adapter?
What is the purpose of changing the ttl file so that it has the correct SSID and password if I am going to run the WiFi Wizard after runing this Macro?
Why are all new WiFi adapters not sent with this already configured? Roberto just told me to do this procedure on a recently purchased, brand new WiFi adapter?
What is the purpose of changing the ttl file so that it has the correct SSID and password if I am going to run the WiFi Wizard after runing this Macro?
Re: Wifi will not connect after firmware update
If you run the macro, you don't need to use the wifi utility anymore. It should be already configured.
Roberto.
Re: Wifi will not connect after firmware update
Thanks. And why are the WiFi adapters shipped without this Macro run on them please?
Re: Wifi will not connect after firmware update
They usually are.
I just want to make sure you don't have one that got missed.
I just want to make sure you don't have one that got missed.
Roberto.
-
- Posts: 54
- Joined: Mon Oct 24, 2011 10:16 am
- Location: Gainesville, Florida
Re: Wifi will not connect after firmware update
I have tried all of the above and still the wifi device will not connect. Any other suggestions?
Re: Wifi will not connect after firmware update
Can you post the log of what you got on tera term screen?
Roberto.
-
- Posts: 54
- Joined: Mon Oct 24, 2011 10:16 am
- Location: Gainesville, Florida
Re: Wifi will not connect after firmware update
There is nothing the screen is blank.
-
- Posts: 54
- Joined: Mon Oct 24, 2011 10:16 am
- Location: Gainesville, Florida
Re: Wifi will not connect after firmware update
So, there is no fix for the wifi unit?
-
- Posts: 54
- Joined: Mon Oct 24, 2011 10:16 am
- Location: Gainesville, Florida
Re: Wifi will not connect after firmware update
Just tried to use the script again, the following was shown on the screen.
à`Pqpàp >xðÀ 0 y`Ã}_~¹ý:þ÷þ EÜ(?ø>?Ѿû ýøÈþàwôô¾ÿÎ0¿?ðÿÿð
þð
à`Pqpàp >xðÀ 0 y`Ã}_~¹ý:þ÷þ EÜ(?ø>?Ѿû ýøÈþàwôô¾ÿÎ0¿?ðÿÿð
þð
Re: Wifi will not connect after firmware update
You are probably not choosing the correct baud rate.
Please follow the instructions carefully.
Try using 57600 baud as mentioned in the instruction.
Please follow the instructions carefully.
Try using 57600 baud as mentioned in the instruction.
Roberto.
-
- Posts: 54
- Joined: Mon Oct 24, 2011 10:16 am
- Location: Gainesville, Florida
Re: Wifi will not connect after firmware update
Changing the baud rate to 57600 did not change anything. Still will not work with the wifi utility.
Re: Wifi will not connect after firmware update
Are you talking about wifi utility or Tera term. Two different ways of setting it up.
Can you post the log you get with 57600 baud?
Can you post the log you get with 57600 baud?
Roberto.
-
- Posts: 54
- Joined: Mon Oct 24, 2011 10:16 am
- Location: Gainesville, Florida
Re: Wifi will not connect after firmware update
Everything loads with terterm. When the script is complete, I then try the wifi utility and it gives me an error, no blinking lights. The wifi screen says, Please wait, attempting to communicate with the Reef Angel wifi attachment.
"Error" Please disconnect and then reconnect the Reef Angel wifi attachment from the USB ttl cable and try again.
"Error" Please disconnect and then reconnect the Reef Angel wifi attachment from the USB ttl cable and try again.
Re: Wifi will not connect after firmware update
If you use tera term and it is successful, the wifi attachment should already be configured and you don't need the wifi utility anymore.
If the wifi attachment has no blinking lights, it is probably not working and it shouldn't be able to accept the script from tera term.
Can you please post the log of tera term?
If the wifi attachment has no blinking lights, it is probably not working and it shouldn't be able to accept the script from tera term.
Can you please post the log of tera term?
Roberto.
-
- Posts: 54
- Joined: Mon Oct 24, 2011 10:16 am
- Location: Gainesville, Florida
Re: Wifi will not connect after firmware update
The characters listed below are the only things printed on the teraterm screen.
Ðþÿþ
Ðþÿþ
Re: Wifi will not connect after firmware update
That means the macro never ran correctly.
Is the green LED blinking? How about blue?
If you want to send it back to have it checked out, send me a PM.
Is the green LED blinking? How about blue?
If you want to send it back to have it checked out, send me a PM.
Roberto.
-
- Posts: 54
- Joined: Mon Oct 24, 2011 10:16 am
- Location: Gainesville, Florida
Re: Wifi will not connect after firmware update
I sent a PM. Did you receive it?
Re: Wifi will not connect after firmware update
is this all we need to change in the ttl file?rimai wrote:sendln 'set wlan ssid testing'
sendln 'set wlan pass a01b02c03d'
Re: Wifi will not connect after firmware update
hi @rimai please can you assist i followed the steps after making error of update copied and pasted earlier post of steps...
1. I updated firmware and then was trying every method for connection with no results.
2. I tried then to revert firmware via Macro suggested by 'Rimai' but was automatically changing to baud rate of 57600 (I thought I was supposed to do that)
did exactly this then:
Tried with default Baud of 9600 but no luck. blue lights are still flashing
any further advice?
1. I updated firmware and then was trying every method for connection with no results.
2. I tried then to revert firmware via Macro suggested by 'Rimai' but was automatically changing to baud rate of 57600 (I thought I was supposed to do that)
did exactly this then:
Tried with default Baud of 9600 but no luck. blue lights are still flashing
any further advice?
Re: Wifi will not connect after firmware update
sorry double post
Last edited by greatwyt on Tue Nov 29, 2016 12:15 pm, edited 1 time in total.
Re: Wifi will not connect after firmware update
CMD
factory RESET
Set Factory Defaults
<4.41> reboot
*Reboot*CMD
set ftp address 198.175.253.161
AOK
<4.41> save
Storing in config
<4.41> set wlan ssid Pretty-Fly-forset wlan pass Khe
AOK
<4.41> set option deviceid ReefAngelWifi
AOK
<4.41> set w j 1
AOK
<4.41> set c c 0
AOK
<4.41> set c r 0
AOK
<4.41> set c o 0
AOK
<4.41> set i d 1
AOK
<4.41> set c i 3
AOK
<4.41> set dns name http://www(.)reefangel(.)com
AOK
<4.41> set i h 23.24.193.9
AOK
<4.41> set i r 80
AOK
<4.41> set i f 0x06
AOK
<4.41> set s t 0x10
AOK
<4.41> set u m 2
AOK
<4.41> set i p 2
AOK
<4.41> set u b 57600
AOK
<4.41> set s p 0
AOK
<4.41> set c s 1420
AOK
<4.41> save
Storing in config
<4.41> save user
Storing in user
<4.41> reboot
*Reboot*
edited passphrase
edited brackets into url
also full name of my ssid is Pretty-Fly-for-a-Wi-Fi and is entered as such into Tll file
factory RESET
Set Factory Defaults
<4.41> reboot
*Reboot*CMD
set ftp address 198.175.253.161
AOK
<4.41> save
Storing in config
<4.41> set wlan ssid Pretty-Fly-forset wlan pass Khe
AOK
<4.41> set option deviceid ReefAngelWifi
AOK
<4.41> set w j 1
AOK
<4.41> set c c 0
AOK
<4.41> set c r 0
AOK
<4.41> set c o 0
AOK
<4.41> set i d 1
AOK
<4.41> set c i 3
AOK
<4.41> set dns name http://www(.)reefangel(.)com
AOK
<4.41> set i h 23.24.193.9
AOK
<4.41> set i r 80
AOK
<4.41> set i f 0x06
AOK
<4.41> set s t 0x10
AOK
<4.41> set u m 2
AOK
<4.41> set i p 2
AOK
<4.41> set u b 57600
AOK
<4.41> set s p 0
AOK
<4.41> set c s 1420
AOK
<4.41> save
Storing in config
<4.41> save user
Storing in user
<4.41> reboot
*Reboot*
edited passphrase
edited brackets into url
also full name of my ssid is Pretty-Fly-for-a-Wi-Fi and is entered as such into Tll file