Wifi will not connect after firmware update

Expansion modules and attachments
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: Wifi will not connect after firmware update

Post by rimai »

I'm not so sure that it will take those dashes.
Can you try changing your said and pass tobe alpha numeric only?
Roberto.
greatwyt
Posts: 11
Joined: Thu Jun 16, 2016 5:56 am

Re: Wifi will not connect after firmware update

Post by greatwyt »

i will, just so you know, it makes me sad. i was quite proud of that name lol
greatwyt
Posts: 11
Joined: Thu Jun 16, 2016 5:56 am

Re: Wifi will not connect after firmware update

Post by greatwyt »

still no luck, blue lights still flashing

MD
factory RESET
Set Factory Defaults
<4.41> reboot
*Reboot*CMD
set ftp address 198.175.253.161
AOK
<4.41> save
Storing in config
<4.41> set wlan ssid PrettyFlyForAWset wlan pass Khan87home
AOK
<4.41> set option deviceid ReefAngelWifi
AOK
<4.41> set w j 1
AOK
<4.41> set c c 0
AOK
<4.41> set c r 0
AOK
<4.41> set c o 0
AOK
<4.41> set i d 1
AOK
<4.41> set c i 3
AOK
<4.41> set dns name www.reefangel.com
AOK
<4.41> set i h 23.24.193.9
AOK
<4.41> set i r 80
AOK
<4.41> set i f 0x06
AOK
<4.41> set s t 0x10
AOK
<4.41> set u m 2
AOK
<4.41> set i p 2
AOK
<4.41> set u b 57600
AOK
<4.41> set s p 0
AOK
<4.41> set c s 1420
AOK
<4.41> save
Storing in config
<4.41> save user
Storing in user
<4.41> reboot
*Reboot*
greatwyt
Posts: 11
Joined: Thu Jun 16, 2016 5:56 am

Re: Wifi will not connect after firmware update

Post by greatwyt »

nevermind, shortened SSId and Success! thank you
rrasco
Posts: 26
Joined: Wed Apr 03, 2013 7:36 am

Re: Wifi will not connect after firmware update

Post by rrasco »

Is this still the updated macro? I'm not sure what host is the right one.

HOST=104.36.18.155:80

EDIT: Looks like this host is working. My portal began updating. It won't work in Chrome for some reason though. Whole page goes blank.
-You had me at PWM
Image
slm222
Posts: 105
Joined: Wed Nov 18, 2015 9:16 pm

Re: Wifi will not connect after firmware update

Post by slm222 »

i went through as advised. it says ERR on the log. doesnt seem like i can get any charts to come up though, still.

set ftp address 198.175.253.161
AOK
<4.41> save
Storing in config
<4.41> Monroe
ERR: ?-Cmd
<4.41> 3612129248
ERR: ?-Cmd
<4.41> set option deviceid ReefAngelWifi
AOK
<4.41> set w j 1
AOK
<4.41> set c c 0
AOK
<4.41> set c r 0
AOK
<4.41> set c o 0
AOK
<4.41> set i d 1
AOK
<4.41> set c i 3
AOK
<4.41> set dns name www.reefangel.com
AOK
<4.41> set i h 104.36.18.155
AOK
<4.41> set i r 80
AOK
<4.41> set i f 0x06
AOK
<4.41> set s t 0x10
AOK
<4.41> set u m 2
AOK
<4.41> set i p 2
AOK
<4.41> set u b 57600
AOK
<4.41> set s p 0
AOK
<4.41> set c s 1420
AOK
<4.41> save
Storing in config
<4.41> save user
Storing in user
<4.41> reboot
*Reboot*
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: Wifi will not connect after firmware update

Post by rimai »

You edited the file incorrectly.

Code: Select all

sendln 'set wlan ssid testing2'
wait 'AOK'
sendln 'set wlan pass a01b02c03d'
wait 'AOK'
You should only replace the testing2 and a01b02c03d and not the entire line.
Roberto.
slm222
Posts: 105
Joined: Wed Nov 18, 2015 9:16 pm

Re: Wifi will not connect after firmware update

Post by slm222 »

ahh. thank you. i fixed it.
Spotted
Posts: 101
Joined: Thu May 10, 2012 5:46 am
Location: Sunny (and hot) South Florida

Re: Wifi will not connect after firmware update

Post by Spotted »

Just how long should this process take? Is this how it ends? This is from the Tera Term window:

CMD
factory RESET
Set Factory Defaults
<4.00> reboot
*Reboot*CMD
set ftp address 198.175.253.161
AOK
<4.00> save
Storing in config
<4.00> set wlan ssid The Bat Cave
AOK
<4.00> set wlan pass Youshallnotpass
AOK
<4.00> set option deviceid ReefAngelWifi
AOK
<4.00> set w j 1
AOK
<4.00> set c c 0
AOK
<4.00> set c r 0
AOK
<4.00> set c o 0
AOK
<4.00> set i d 1
AOK
<4.00> set c i 3
AOK
<4.00> set dns name www.reefangel.com
AOK
<4.00> set i h 104.36.18.155
AOK
<4.00> set i r 80
AOK
<4.00> set i f 0x06
AOK
<4.00> set s t 0x10
AOK
<4.00> set u m 2
AOK
<4.00> set i p 2
AOK
<4.00> set u b 57600
AOK
<4.00> set s p 0
AOK
<4.00> set c s 1420
AOK
<4.00> save
Storing in config
<4.00> save user
Storing in user
<4.00> reboot
*Reboot*CMD
factory RESET
Set Factory Defaults
<4.00> reboot
*Reboot*CMD
set ftp address 198.175.253.161
AOK
<4.00> save
Storing in config
<4.00> set wlan ssid The Bat Cave
AOK
<4.00> set wlan pass Youshallnotpass
AOK
<4.00> set option deviceid ReefAngelWifi
AOK
<4.00> set w j 1
AOK
<4.00> set c c 0
AOK
<4.00> set c r 0
AOK
<4.00> set c o 0
AOK
<4.00> set i d 1
AOK
<4.00> set c i 3
AOK
<4.00> set dns name www.reefangel.com
AOK
<4.00> set i h 104.36.18.155
AOK
<4.00> set i r 80
AOK
<4.00> set i f 0x06
AOK
<4.00> set s t 0x10
AOK
<4.00> set u m 2
AOK
<4.00> set i p 2
AOK
<4.00> set u b 57600
AOK
<4.00> set s p 0
AOK
<4.00> set c s 1420
AOK
<4.00> save
Storing in config
<4.00> save user
Storing in user
<4.00> reboot
*Reboot*
Image
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: Wifi will not connect after firmware update

Post by rimai »

That should be it, except that SSID cannot have spaces.
You have to replace them with $, I think
Roberto.
MortenB
Posts: 6
Joined: Tue Jun 19, 2012 3:14 pm

Re: Wifi will not connect after firmware update

Post by MortenB »

Is this supposed to be a one-time fix? I've done this several times now and each time, the WiFi works for a few weeks and then stop working until I run the macro again, rinse & repeat. Thanks, MB
psirex
Posts: 16
Joined: Tue Jun 11, 2013 8:44 am

Re: Wifi will not connect after firmware update

Post by psirex »

Getting only flashing Green > Blue > Green > Blue > Blue > Green.... Is there a limitation on what the password can contain?
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: Wifi will not connect after firmware update

Post by rimai »

blue means it is not connected to your wifi network.
Did you try moving closer?
Was there any change in the router?
What security do you have in your router? Try WPA2-PSK.
Roberto.
anderzon_
Posts: 69
Joined: Sun Oct 27, 2013 11:35 am

Re: Wifi will not connect after firmware update

Post by anderzon_ »

Having problem with this. Cant get the wifi to work. This is my file i have used in teraterm:

x=0
while x<>121

messagebox 'Start WiFly module configuration' 'Webscan Config Program'

;this macro all sent with 5 msec character delay
timeout=10
send '$$$'
wait 'CMD'
sendln 'factory RESET'
wait 'Set Factory Defaults'

sendln 'reboot'
wait '*READY*'

;----------------------------------------
; Begin user settings


send '$$$'
wait 'CMD'
sendln 'set ftp address 198.175.253.161'
wait'AOK'
sendln 'save'
wait 'config'
sendln 'set wlan ssid Asus'
wait 'AOK'
sendln 'set wlan pass "my router pass"'
wait 'AOK'
sendln 'set option deviceid ReefAngelWifi'
wait 'AOK'
sendln 'set w j 1'
wait 'AOK'
sendln 'set c c 0'
wait 'AOK'
sendln 'set c r 0'
wait 'AOK'
sendln 'set c o 0'
wait 'AOK'
sendln 'set i d 1'
wait 'AOK'
sendln 'set c i 3'
wait 'AOK'
sendln 'set dns name www.reefangel.com'
wait 'AOK'
sendln 'set i h 104.36.18.155'
wait 'AOK'
sendln 'set i r 80'
wait 'AOK'
sendln 'set i f 0x06'
wait 'AOK'
sendln 'set s t 0x10'
wait 'AOK'
sendln 'set u m 2'
wait 'AOK'
sendln 'set i p 2'
wait 'AOK'
sendln 'set u b 57600'
wait 'AOK'
sendln 'set s p 0'
wait 'AOK'
sendln 'set c s 1420'
wait 'AOK'

sendln 'save'
wait 'config'

sendln 'save user'
wait 'user'

sendln'reboot'


;inputbox 'Configure another module (y/n)' 'WiFly Config Program'

; convert inputstr to ASCII int value
; str2code x inputstr

endwhile



When i load the macro it say Webscan Config Program, and then its couting up to 65 or something, then the same Webscan Config Program comes again and again. Never a message thats its done and ok. Whats should i do to fix it?
Post Reply