Page 2 of 3

Re: Wifi will not connect after firmware update

Posted: Wed Jun 22, 2016 4:22 pm
by rimai
If you use tera term and it is successful, the wifi attachment should already be configured and you don't need the wifi utility anymore.
If the wifi attachment has no blinking lights, it is probably not working and it shouldn't be able to accept the script from tera term.
Can you please post the log of tera term?

Re: Wifi will not connect after firmware update

Posted: Thu Jun 23, 2016 6:57 am
by rschneider77
The characters listed below are the only things printed on the teraterm screen.

Ðþÿþ

Re: Wifi will not connect after firmware update

Posted: Thu Jun 23, 2016 8:08 am
by rimai
That means the macro never ran correctly.
Is the green LED blinking? How about blue?
If you want to send it back to have it checked out, send me a PM.

Re: Wifi will not connect after firmware update

Posted: Thu Jun 23, 2016 3:08 pm
by rschneider77
I sent a PM. Did you receive it?

Re: Wifi will not connect after firmware update

Posted: Thu Jun 23, 2016 5:57 pm
by rimai
Yes

Re: Wifi will not connect after firmware update

Posted: Tue Aug 30, 2016 5:07 pm
by psirex
rimai wrote:sendln 'set wlan ssid testing'
sendln 'set wlan pass a01b02c03d'
is this all we need to change in the ttl file?

Re: Wifi will not connect after firmware update

Posted: Tue Nov 29, 2016 5:33 am
by greatwyt
hi @rimai please can you assist i followed the steps after making error of update copied and pasted earlier post of steps...

1. I updated firmware and then was trying every method for connection with no results.
2. I tried then to revert firmware via Macro suggested by 'Rimai' but was automatically changing to baud rate of 57600 (I thought I was supposed to do that)


did exactly this then:
Tried with default Baud of 9600 but no luck. blue lights are still flashing

any further advice?

Re: Wifi will not connect after firmware update

Posted: Tue Nov 29, 2016 10:42 am
by rimai
Can you post the log of tera term?

Re: Wifi will not connect after firmware update

Posted: Tue Nov 29, 2016 12:12 pm
by greatwyt
sorry double post

Re: Wifi will not connect after firmware update

Posted: Tue Nov 29, 2016 12:14 pm
by greatwyt
CMD
factory RESET
Set Factory Defaults
<4.41> reboot
*Reboot*CMD
set ftp address 198.175.253.161
AOK
<4.41> save
Storing in config
<4.41> set wlan ssid Pretty-Fly-forset wlan pass Khe
AOK
<4.41> set option deviceid ReefAngelWifi
AOK
<4.41> set w j 1
AOK
<4.41> set c c 0
AOK
<4.41> set c r 0
AOK
<4.41> set c o 0
AOK
<4.41> set i d 1
AOK
<4.41> set c i 3
AOK
<4.41> set dns name http://www(.)reefangel(.)com
AOK
<4.41> set i h 23.24.193.9
AOK
<4.41> set i r 80
AOK
<4.41> set i f 0x06
AOK
<4.41> set s t 0x10
AOK
<4.41> set u m 2
AOK
<4.41> set i p 2
AOK
<4.41> set u b 57600
AOK
<4.41> set s p 0
AOK
<4.41> set c s 1420
AOK
<4.41> save
Storing in config
<4.41> save user
Storing in user
<4.41> reboot
*Reboot*




edited passphrase
edited brackets into url
also full name of my ssid is Pretty-Fly-for-a-Wi-Fi and is entered as such into Tll file

Re: Wifi will not connect after firmware update

Posted: Tue Nov 29, 2016 12:26 pm
by rimai
I'm not so sure that it will take those dashes.
Can you try changing your said and pass tobe alpha numeric only?

Re: Wifi will not connect after firmware update

Posted: Tue Nov 29, 2016 12:28 pm
by greatwyt
i will, just so you know, it makes me sad. i was quite proud of that name lol

Re: Wifi will not connect after firmware update

Posted: Tue Nov 29, 2016 12:46 pm
by greatwyt
still no luck, blue lights still flashing

MD
factory RESET
Set Factory Defaults
<4.41> reboot
*Reboot*CMD
set ftp address 198.175.253.161
AOK
<4.41> save
Storing in config
<4.41> set wlan ssid PrettyFlyForAWset wlan pass Khan87home
AOK
<4.41> set option deviceid ReefAngelWifi
AOK
<4.41> set w j 1
AOK
<4.41> set c c 0
AOK
<4.41> set c r 0
AOK
<4.41> set c o 0
AOK
<4.41> set i d 1
AOK
<4.41> set c i 3
AOK
<4.41> set dns name www.reefangel.com
AOK
<4.41> set i h 23.24.193.9
AOK
<4.41> set i r 80
AOK
<4.41> set i f 0x06
AOK
<4.41> set s t 0x10
AOK
<4.41> set u m 2
AOK
<4.41> set i p 2
AOK
<4.41> set u b 57600
AOK
<4.41> set s p 0
AOK
<4.41> set c s 1420
AOK
<4.41> save
Storing in config
<4.41> save user
Storing in user
<4.41> reboot
*Reboot*

Re: Wifi will not connect after firmware update

Posted: Tue Nov 29, 2016 12:50 pm
by greatwyt
nevermind, shortened SSId and Success! thank you

Re: Wifi will not connect after firmware update

Posted: Sun Jan 15, 2017 2:41 pm
by rrasco
Is this still the updated macro? I'm not sure what host is the right one.

HOST=104.36.18.155:80

EDIT: Looks like this host is working. My portal began updating. It won't work in Chrome for some reason though. Whole page goes blank.

Re: Wifi will not connect after firmware update

Posted: Mon Feb 27, 2017 1:30 am
by slm222
i went through as advised. it says ERR on the log. doesnt seem like i can get any charts to come up though, still.

set ftp address 198.175.253.161
AOK
<4.41> save
Storing in config
<4.41> Monroe
ERR: ?-Cmd
<4.41> 3612129248
ERR: ?-Cmd
<4.41> set option deviceid ReefAngelWifi
AOK
<4.41> set w j 1
AOK
<4.41> set c c 0
AOK
<4.41> set c r 0
AOK
<4.41> set c o 0
AOK
<4.41> set i d 1
AOK
<4.41> set c i 3
AOK
<4.41> set dns name www.reefangel.com
AOK
<4.41> set i h 104.36.18.155
AOK
<4.41> set i r 80
AOK
<4.41> set i f 0x06
AOK
<4.41> set s t 0x10
AOK
<4.41> set u m 2
AOK
<4.41> set i p 2
AOK
<4.41> set u b 57600
AOK
<4.41> set s p 0
AOK
<4.41> set c s 1420
AOK
<4.41> save
Storing in config
<4.41> save user
Storing in user
<4.41> reboot
*Reboot*

Re: Wifi will not connect after firmware update

Posted: Mon Feb 27, 2017 1:34 am
by rimai
You edited the file incorrectly.

Code: Select all

sendln 'set wlan ssid testing2'
wait 'AOK'
sendln 'set wlan pass a01b02c03d'
wait 'AOK'
You should only replace the testing2 and a01b02c03d and not the entire line.

Re: Wifi will not connect after firmware update

Posted: Mon Feb 27, 2017 1:45 am
by slm222
ahh. thank you. i fixed it.

Re: Wifi will not connect after firmware update

Posted: Fri Jul 07, 2017 2:28 pm
by Spotted
Just how long should this process take? Is this how it ends? This is from the Tera Term window:

CMD
factory RESET
Set Factory Defaults
<4.00> reboot
*Reboot*CMD
set ftp address 198.175.253.161
AOK
<4.00> save
Storing in config
<4.00> set wlan ssid The Bat Cave
AOK
<4.00> set wlan pass Youshallnotpass
AOK
<4.00> set option deviceid ReefAngelWifi
AOK
<4.00> set w j 1
AOK
<4.00> set c c 0
AOK
<4.00> set c r 0
AOK
<4.00> set c o 0
AOK
<4.00> set i d 1
AOK
<4.00> set c i 3
AOK
<4.00> set dns name www.reefangel.com
AOK
<4.00> set i h 104.36.18.155
AOK
<4.00> set i r 80
AOK
<4.00> set i f 0x06
AOK
<4.00> set s t 0x10
AOK
<4.00> set u m 2
AOK
<4.00> set i p 2
AOK
<4.00> set u b 57600
AOK
<4.00> set s p 0
AOK
<4.00> set c s 1420
AOK
<4.00> save
Storing in config
<4.00> save user
Storing in user
<4.00> reboot
*Reboot*CMD
factory RESET
Set Factory Defaults
<4.00> reboot
*Reboot*CMD
set ftp address 198.175.253.161
AOK
<4.00> save
Storing in config
<4.00> set wlan ssid The Bat Cave
AOK
<4.00> set wlan pass Youshallnotpass
AOK
<4.00> set option deviceid ReefAngelWifi
AOK
<4.00> set w j 1
AOK
<4.00> set c c 0
AOK
<4.00> set c r 0
AOK
<4.00> set c o 0
AOK
<4.00> set i d 1
AOK
<4.00> set c i 3
AOK
<4.00> set dns name www.reefangel.com
AOK
<4.00> set i h 104.36.18.155
AOK
<4.00> set i r 80
AOK
<4.00> set i f 0x06
AOK
<4.00> set s t 0x10
AOK
<4.00> set u m 2
AOK
<4.00> set i p 2
AOK
<4.00> set u b 57600
AOK
<4.00> set s p 0
AOK
<4.00> set c s 1420
AOK
<4.00> save
Storing in config
<4.00> save user
Storing in user
<4.00> reboot
*Reboot*

Re: Wifi will not connect after firmware update

Posted: Fri Jul 07, 2017 3:04 pm
by rimai
That should be it, except that SSID cannot have spaces.
You have to replace them with $, I think

Re: Wifi will not connect after firmware update

Posted: Fri Aug 04, 2017 10:42 am
by MortenB
Is this supposed to be a one-time fix? I've done this several times now and each time, the WiFi works for a few weeks and then stop working until I run the macro again, rinse & repeat. Thanks, MB

Re: Wifi will not connect after firmware update

Posted: Sat Aug 19, 2017 12:21 pm
by psirex
Getting only flashing Green > Blue > Green > Blue > Blue > Green.... Is there a limitation on what the password can contain?

Re: Wifi will not connect after firmware update

Posted: Sat Aug 19, 2017 1:21 pm
by rimai
blue means it is not connected to your wifi network.
Did you try moving closer?
Was there any change in the router?
What security do you have in your router? Try WPA2-PSK.

Re: Wifi will not connect after firmware update

Posted: Fri Jan 26, 2018 2:31 pm
by anderzon_
Having problem with this. Cant get the wifi to work. This is my file i have used in teraterm:

x=0
while x<>121

messagebox 'Start WiFly module configuration' 'Webscan Config Program'

;this macro all sent with 5 msec character delay
timeout=10
send '$$$'
wait 'CMD'
sendln 'factory RESET'
wait 'Set Factory Defaults'

sendln 'reboot'
wait '*READY*'

;----------------------------------------
; Begin user settings


send '$$$'
wait 'CMD'
sendln 'set ftp address 198.175.253.161'
wait'AOK'
sendln 'save'
wait 'config'
sendln 'set wlan ssid Asus'
wait 'AOK'
sendln 'set wlan pass "my router pass"'
wait 'AOK'
sendln 'set option deviceid ReefAngelWifi'
wait 'AOK'
sendln 'set w j 1'
wait 'AOK'
sendln 'set c c 0'
wait 'AOK'
sendln 'set c r 0'
wait 'AOK'
sendln 'set c o 0'
wait 'AOK'
sendln 'set i d 1'
wait 'AOK'
sendln 'set c i 3'
wait 'AOK'
sendln 'set dns name www.reefangel.com'
wait 'AOK'
sendln 'set i h 104.36.18.155'
wait 'AOK'
sendln 'set i r 80'
wait 'AOK'
sendln 'set i f 0x06'
wait 'AOK'
sendln 'set s t 0x10'
wait 'AOK'
sendln 'set u m 2'
wait 'AOK'
sendln 'set i p 2'
wait 'AOK'
sendln 'set u b 57600'
wait 'AOK'
sendln 'set s p 0'
wait 'AOK'
sendln 'set c s 1420'
wait 'AOK'

sendln 'save'
wait 'config'

sendln 'save user'
wait 'user'

sendln'reboot'


;inputbox 'Configure another module (y/n)' 'WiFly Config Program'

; convert inputstr to ASCII int value
; str2code x inputstr

endwhile



When i load the macro it say Webscan Config Program, and then its couting up to 65 or something, then the same Webscan Config Program comes again and again. Never a message thats its done and ok. Whats should i do to fix it?