I've just tried to use the relay box expansion code and keep having an error when I compile. This happens even when I use some code generated by the wizard.
Example:
Code: Select all
#include <ReefAngel_Features.h>
#include <Globals.h>
#include <RA_Wifi.h>
#include <Wire.h>
#include <OneWire.h>
#include <Time.h>
#include <DS1307RTC.h>
#include <InternalEEPROM.h>
#include <RA_NokiaLCD.h>
#include <RA_ATO.h>
#include <RA_Joystick.h>
#include <LED.h>
#include <RA_TempSensor.h>
#include <Relay.h>
#include <RA_PWM.h>
#include <Timer.h>
#include <Memory.h>
#include <InternalEEPROM.h>
#include <RA_Colors.h>
#include <RA_CustomColors.h>
#include <Salinity.h>
#include <RF.h>
#include <IO.h>
#include <ORP.h>
#include <AI.h>
#include <PH.h>
#include <WaterLevel.h>
#include <Humidity.h>
#include <DCPump.h>
#include <ReefAngel.h>
////// Place global variable code below here
////// Place global variable code above here
void setup()
{
// This must be the first line
ReefAngel.Init(); //Initialize controller
ReefAngel.SetTemperatureUnit( Celsius ); // set to Celsius Temperature
ReefAngel.Use2014Screen(); // Let's use 2014 Screen
// Ports toggled in Feeding Mode
ReefAngel.FeedingModePorts = Port3Bit | Port5Bit | Port6Bit | Port8Bit;
ReefAngel.FeedingModePortsE[0] = 0;
// Ports toggled in Water Change Mode
ReefAngel.WaterChangePorts = Port3Bit | Port5Bit | Port6Bit | Port7Bit | Port8Bit;
ReefAngel.WaterChangePortsE[0] = 0;
// Ports toggled when Lights On / Off menu entry selected
ReefAngel.LightsOnPorts = Port2Bit | Port4Bit;
ReefAngel.LightsOnPortsE[0] = Port1Bit;
// Ports turned off when Overheat temperature exceeded
ReefAngel.OverheatShutoffPorts = Port7Bit;
ReefAngel.OverheatShutoffPortsE[0] = 0;
// Use T1 probe as temperature and overheat functions
ReefAngel.TempProbe = T1_PROBE;
ReefAngel.OverheatProbe = T1_PROBE;
// Ports that are always on
ReefAngel.Relay.On( Port6 );
ReefAngel.Relay.On( Port8 );
////// Place additional initialization code below here
////// Place additional initialization code above here
}
void loop()
{
ReefAngel.ActinicLights( Port2 );
ReefAngel.ActinicLights( Port4 );
ReefAngel.SingleATOLow( Port5 );
ReefAngel.StandardHeater( Port7 );
ReefAngel.PWM.DaylightPWMSlope();
ReefAngel.PWM.ActinicPWMSlope();
ReefAngel.PWM.Channel0PWMSlope();
ReefAngel.PWM.Channel1PWMParabola();
ReefAngel.PWM.Channel2PWMParabola();
ReefAngel.PWM.Channel3PWMParabola();
////// Place your custom code below here
////// Place your custom code above here
// This should always be the last line
ReefAngel.Portal( "tanked_kiwi" );
ReefAngel.ShowInterface();
}
The following features were detected:
Dimming Signal
Wifi Attachment
Dimming Expansion Module
2014 Main Screen
Extra Font - Medium Size (8x8 pixels)
Simple Menu
sketch_jun22a.cpp: In function 'void setup()':
sketch_jun22a:46: error: 'class ReefAngelClass' has no member named 'FeedingModePortsE'
sketch_jun22a:49: error: 'class ReefAngelClass' has no member named 'WaterChangePortsE'
sketch_jun22a:52: error: 'class ReefAngelClass' has no member named 'LightsOnPortsE'
sketch_jun22a:55: error: 'class ReefAngelClass' has no member named 'OverheatShutoffPortsE'
Any Idea why this is happening?
Evan.