RANet Ready Dimmable LED Driver

Expansion modules and attachments
jegillis
Posts: 86
Joined: Sat Jan 04, 2014 10:26 am

Re: RANet Ready Dimmable LED Driver

Post by jegillis »

Im getting an overheat problem with the LED driver, channel 0 was shutting off for a few seconds about every 10 seconds. I unplugged the driver and checked the temp inside the case and found it at 150 degrees. I took the cover off and let it cool. Plugged it back in and it appears to be ok for now except the green power led is no longer working.

I have the driver in my cabinet that is running about 72 degrees right now.

Channel 0 is being run at 950 ma
Channel 1 and 2 are run at 600 ma

This is going to end up being a problem in the summer when my thermostat will not be set at 66 degrees.
Image
jegillis
Posts: 86
Joined: Sat Jan 04, 2014 10:26 am

Re: RANet Ready Dimmable LED Driver

Post by jegillis »

Ok well the dimmer does not dim anymore everything is just at 100 percent or off nothing in between for all 3 channels
Image
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: RANet Ready Dimmable LED Driver

Post by rimai »

PM for RMA
Roberto.
Post Reply