Expansion Woes

Expansion modules and attachments
Post Reply
paperdesk
Posts: 173
Joined: Fri May 23, 2014 8:09 am

Re: Expansion Woes

Post by paperdesk »

Salinity Module Update:
I had an extra salinity module and probe, and put them in, and the reading no longer drops continuously, but it does go up and down quite a bit (anywhere from 28 to 35).
Image
fishflipper
Posts: 121
Joined: Fri Jul 03, 2015 8:29 am

Re: Expansion Woes

Post by fishflipper »

any update on your salinity probes? i have a similar issue with my salinity probe except min goes up not down. it went from 20.1 to 88.1 in 10 hours. when i test in the calibration solution it stays at 35, then i put it in my tank and i get readings of 20. my hydrometer is telling me its 31. any ideas?? i am at a loss.
paperdesk
Posts: 173
Joined: Fri May 23, 2014 8:09 am

Re: Expansion Woes

Post by paperdesk »

I'm afraid it is still very much unresolved. I've charted what happens with 3 different probes on two different modules that I'll post sometime when I get a chance.
Image
Post Reply