Portal Settings, Water Leak Flag?

Expansion modules and attachments

Posts: 51
Joined: Wed Sep 16, 2015 8:12 am
PostPosted: Sun Apr 03, 2016 4:51 pm
Trying to send myself txt msg's.. In portal settings I see a variable 'water leak flag' but in setting this:
Email notification if>
Water Leak Flag = 1

I receive no email if I trip the leak detector.. Thoughts?

Thanks very much!!

Posts: 12528
Joined: Fri Mar 18, 2011 6:47 pm
PostPosted: Sun Apr 03, 2016 4:58 pm
The controller only sends updates to the sever every 5 minutes.
Did you wait that long before you cleared the leak flag?
Roberto.
User avatar
Posts: 1426
Joined: Fri Mar 29, 2013 3:51 pm
Location: Oklahoma City
PostPosted: Mon Apr 04, 2016 5:52 am
There seems to be a 1 hour delay on e-mails. I've noticed this before too.
User avatar
Posts: 1426
Joined: Fri Mar 29, 2013 3:51 pm
Location: Oklahoma City
PostPosted: Mon Apr 04, 2016 8:47 am
OK, delay seem to only be the first email after the rule has been set up.

Make new rule, delay on first e-mail, then works as intended.

Posts: 51
Joined: Wed Sep 16, 2015 8:12 am
PostPosted: Thu Apr 14, 2016 9:35 am
Hmmm.. You mean it takes 5 minutes of it being on before it registers with the portal? I guess I an turn the sensitivity up to trigger it and leave it.
Haven't tried that yet but I've still not been able to get it to email me.. :(

Posts: 12528
Joined: Fri Mar 18, 2011 6:47 pm
PostPosted: Thu Apr 14, 2016 1:24 pm
Does the portal send email for other parameters?
Roberto.

Posts: 51
Joined: Wed Sep 16, 2015 8:12 am
PostPosted: Thu Apr 28, 2016 6:29 pm
Ya, it sends alerts for other parameters as soon as they happen.

Posts: 12528
Joined: Fri Mar 18, 2011 6:47 pm
PostPosted: Thu Apr 28, 2016 6:46 pm
Does it show water leak in the alerts page in your controller?
The water leak has to be on for about 3 seconds for the controller to generate the alert and avoid false readings.
Roberto.
User avatar
Posts: 5421
Joined: Fri Jul 20, 2012 9:42 am
PostPosted: Fri Apr 29, 2016 11:48 am
I have an issue with ATO timeout... I run a waterlevel ato at 8pm if the level is below a certain point. For some reason that I have yet to figure out it times out after 2 minutes... no idea why. I've got nothing in my code that would cause that and my timeout is properly set at 1 hour. What's interesting is that even though my timeout goes off consistently at 8:02pm I don't get the alert that it's timed out until 9:00pm. Anyway, I thought it was relevant here as someone said they were getting the alerts after an hour. I've given up on debugging and have added an ClearATO at 8:02-8:03pm. It worked well the other night :)

Posts: 12528
Joined: Fri Mar 18, 2011 6:47 pm
PostPosted: Sat Apr 30, 2016 9:03 pm
Are you using memory or hard coded?
Also, are you using the multi or single channel?
Roberto.
Next

Return to Addons

Who is online

Users browsing this forum: Bing [Bot] and 1 guest

cron