Page 1 of 1

Cloud WIFI Problem second try

Posted: Wed Apr 05, 2017 4:43 pm
by LucianoB
Hi, I completed the process but doesn't work. I have two dudes:
a) I receive this Log when tried download de Cloud WIFI Code. Are It fine?

Compiling code for RA_CLOUD board


Progress: 100.00%
Your code was compiled sucessfully.

Attempting to upload your code to RA_CLOUD on local port COM15 ...

Atmel SMART device 0x10010005 found
Device : ATSAMD21G18A
Chip ID : 10010005
Version : v2.0 [Arduino:XYZ] Nov 24 2015 11:34:08
Address : 8192
Pages : 3968
Page Size : 64 bytes
Total Size : 248KB
Planes : 1
Lock Regions : 16
Locked : none
Security : false
Boot Flash : true
BOD : true
BOR : true
Arduino : FAST_CHIP_ERASE
Arduino : FAST_MULTI_PAGE_WRITE
Arduino : CAN_CHECKSUM_MEMORY_BUFFER
Erase flash
done in 0.786 seconds
Write 43044 bytes to flash (673 pages)
[== ] 9% (64/673 pages) [===== ] 19% (128/673 pages) [======== ] 28% (192/673 pages) [=========== ] 38% (256/673 pages) [============== ] 47% (320/673 pages) [================= ] 57% (384/673 pages) [=================== ] 66% (448/673 pages) [====================== ] 76% (512/673 pages) [========================= ] 85% (576/673 pages) [============================ ] 95% (640/673 pages) [==============================] 100% (673/673 pages)
done in 0.271 seconds
Verify 43044 bytes of flash with checksum.
Verify successful
done in 0.052 seconds
CPU reset.
SAM-BA operation failed
Could not program the board



And b) How manage the Code the WIFI Traffic Encryption a like WPA/WEP/WPA2? I don't find where put this information.

Thank you so much and Sorry for being bored

Re: Cloud WIFI Problem second try

Posted: Wed Apr 05, 2017 9:13 pm
by rimai
No. It failed.
Try again.
You don't need to choose encryption.

Re: Cloud WIFI Problem second try

Posted: Thu Apr 06, 2017 5:55 am
by LucianoB
rimai wrote:No. It failed.
Try again.
You don't need to choose encryption.
Thank you. I tried using different USB Port until worked.

Regards

Enviado desde mi Nexus 5 mediante Tapatalk