Cloud WIFI Problem second try

Expansion modules and attachments
Post Reply
LucianoB
Posts: 23
Joined: Fri Mar 11, 2016 4:39 pm

Cloud WIFI Problem second try

Post by LucianoB »

Hi, I completed the process but doesn't work. I have two dudes:
a) I receive this Log when tried download de Cloud WIFI Code. Are It fine?

Compiling code for RA_CLOUD board


Progress: 100.00%
Your code was compiled sucessfully.

Attempting to upload your code to RA_CLOUD on local port COM15 ...

Atmel SMART device 0x10010005 found
Device : ATSAMD21G18A
Chip ID : 10010005
Version : v2.0 [Arduino:XYZ] Nov 24 2015 11:34:08
Address : 8192
Pages : 3968
Page Size : 64 bytes
Total Size : 248KB
Planes : 1
Lock Regions : 16
Locked : none
Security : false
Boot Flash : true
BOD : true
BOR : true
Arduino : FAST_CHIP_ERASE
Arduino : FAST_MULTI_PAGE_WRITE
Arduino : CAN_CHECKSUM_MEMORY_BUFFER
Erase flash
done in 0.786 seconds
Write 43044 bytes to flash (673 pages)
[== ] 9% (64/673 pages) [===== ] 19% (128/673 pages) [======== ] 28% (192/673 pages) [=========== ] 38% (256/673 pages) [============== ] 47% (320/673 pages) [================= ] 57% (384/673 pages) [=================== ] 66% (448/673 pages) [====================== ] 76% (512/673 pages) [========================= ] 85% (576/673 pages) [============================ ] 95% (640/673 pages) [==============================] 100% (673/673 pages)
done in 0.271 seconds
Verify 43044 bytes of flash with checksum.
Verify successful
done in 0.052 seconds
CPU reset.
SAM-BA operation failed
Could not program the board



And b) How manage the Code the WIFI Traffic Encryption a like WPA/WEP/WPA2? I don't find where put this information.

Thank you so much and Sorry for being bored
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: Cloud WIFI Problem second try

Post by rimai »

No. It failed.
Try again.
You don't need to choose encryption.
Roberto.
LucianoB
Posts: 23
Joined: Fri Mar 11, 2016 4:39 pm

Re: Cloud WIFI Problem second try

Post by LucianoB »

rimai wrote:No. It failed.
Try again.
You don't need to choose encryption.
Thank you. I tried using different USB Port until worked.

Regards

Enviado desde mi Nexus 5 mediante Tapatalk
Post Reply