Cloud Server Migration

Expansion modules and attachments

Posts: 12225
Joined: Fri Mar 18, 2011 6:47 pm
PostPosted: Sat Jul 29, 2017 7:03 pm
We decided to use a more robust cloud server and migrated it to a linux box hosting.
What does that mean to you?
You will need to update the firmware of your device to be able to use the new server.
The old server is still operational though.
So, if you do not update the firmware and still would like to use it, you will need to use an older version of the uapp: uappold/
Roberto.
User avatar
Posts: 2737
Joined: Fri Mar 18, 2011 6:20 pm
Location: Illinois
PostPosted: Sat Jul 29, 2017 11:38 pm
does this affect the portal or just the uapp?

Sent from my XT1585 using Tapatalk

Posts: 12225
Joined: Fri Mar 18, 2011 6:47 pm
PostPosted: Sun Jul 30, 2017 1:09 am
Just uapp using the cloud WiFi attachment or RA star
Roberto.

Posts: 79
Joined: Tue Dec 27, 2016 6:26 am
Location: Jacksonville,FL
PostPosted: Sun Jul 30, 2017 2:16 am
How do I update the firmware? Is it for the wifi cloud module only?
-James-

Image

Posts: 12225
Joined: Fri Mar 18, 2011 6:47 pm
PostPosted: Sun Jul 30, 2017 2:20 am
Correct.
Generate it again in the web wizard and upload.
It should update the firmware.
Roberto.

Posts: 16
Joined: Fri Nov 11, 2016 11:08 am
PostPosted: Sun Jul 30, 2017 5:15 pm
Wish I would have seen this post over the weekend so I could have cleared my test alert :) All good and firmware updated now. Thanks Roberto!

Posts: 66
Joined: Fri May 05, 2017 11:27 am
PostPosted: Mon Jul 31, 2017 5:43 pm
Is v2.0 a hardware or firmware change? I'm trying to load the old v1.0 way and it can't find port 6 when trying to upload.

Posts: 79
Joined: Tue Dec 27, 2016 6:26 am
Location: Jacksonville,FL
PostPosted: Mon Jul 31, 2017 5:49 pm
I reloaded the code for the wifi cloud module and it seems to be connected to the new server.
As I mentioned in another thread, my data is still not updating for temp and ph. Email not working either. My banner does not seem to update.
Temp, ph and relays on the main dashboard for portal and uapp is working correctly. I can turn on and off the relays from both also.
-James-

Image

Posts: 66
Joined: Fri May 05, 2017 11:27 am
PostPosted: Mon Jul 31, 2017 6:17 pm
jcjrogers wrote:Is v2.0 a hardware or firmware change? I'm trying to load the old v1.0 way and it can't find port 6 when trying to upload.


Correction, it can't find the device on port 6.

Posts: 66
Joined: Fri May 05, 2017 11:27 am
PostPosted: Tue Aug 01, 2017 12:36 am
Ok, need some help. I've tried two USB cables, and I can't load the new firmware. When I plug into the USB cable coming from the PC, I'm not getting any lights (most of the time, sometimes I get a blue light after it has been connected a while). Either way (light it no light), I get the message that a device cannot be found on port 6. It appears I either need an updated driver or maybe the connector in the Cloud Wifi device is bad. The cables I used work on other devices, so it isn't the cable. I also tried on both my PC and laptop and same thing.
Next

Return to Addons

Who is online

Users browsing this forum: No registered users and 2 guests

cron