Page 3 of 3

Re: WIFI Cloud and WIFI Attachment on 2 RA plusses

Posted: Sat Aug 26, 2017 4:47 pm
by rimai
Not sure I follow.
Let's try using your USB-TTL cable instead of the micro usb on the side.
Connect it to the cloud wifi attachment and open serial monitor.
Press and hold the debug then press and release the reset master then release debug.
Do you get anything on monitor this way?
Make sure you are pressing the correct button. It is not the AP Reset on the side of the unit. It is the reset master on the top right corner.
If that doesn't produce anything, you may need to post a video.

Re: WIFI Cloud and WIFI Attachment on 2 RA plusses

Posted: Sat Aug 26, 2017 5:24 pm
by ecamFT

Code: Select all

G¬yYPmH@HlFfyÈ&­wCP@æýyÈuiœJÕTÄVé9ÈÈHP@•g¡ˆ`FoŸ%JÔTÿZT塌TEÔg{^pH”TEYÖ!\-Z`H`HQü^•Gþ
Current version: 1.0.0
mounted file system
reading config file
opened config file
{"mqtt_username":"EcamFT","mqtt_password":"K*******"}
parsed json
*WM: Adding parameter
*WM: Cloud Username
*WM: Adding parameter
*WM: Cloud Password
*WM: 
*WM: AutoConnect
*WM: Connecting as wifi client...
*WM: Using last saved values, should be faster
*WM: Connection result: 
*WM: 3
*WM: IP Address:
*WM: 192.168.1.229
username: EcamFT
password: K*********
IP address: 192.168.1.229
Connecting to cloud server...
Failed, rc=5 try again in 30 seconds

Re: WIFI Cloud and WIFI Attachment on 2 RA plusses

Posted: Sat Aug 26, 2017 5:25 pm
by ecamFT
i took out my password..... but it was correct


and the failure log keeps repeating

Re: WIFI Cloud and WIFI Attachment on 2 RA plusses

Posted: Sat Aug 26, 2017 6:07 pm
by rimai
it failed to connected t to cloud server.
It may be because of the username if you are positive the password is correct.
Try changing from EcamFT to ecamFT.

Re: WIFI Cloud and WIFI Attachment on 2 RA plusses

Posted: Sat Aug 26, 2017 6:16 pm
by ecamFT
so i should do a factory reset? on the cloud wifi? or is there another way to change the user name

Re: WIFI Cloud and WIFI Attachment on 2 RA plusses

Posted: Sat Aug 26, 2017 6:25 pm
by ecamFT
Success!!!!!!!!!!!!!!!!!!!! this whole ordeal because of an uppercase E..... SMH

im sooo sorry Roberto.... thank you for the patience and awesome customer service

Re: WIFI Cloud and WIFI Attachment on 2 RA plusses

Posted: Sat Aug 26, 2017 6:50 pm
by rimai
Cool!!!
I'll update the manual to state that both username and password need to be case sensitive.

Re: WIFI Cloud and WIFI Attachment on 2 RA plusses

Posted: Sat Aug 26, 2017 6:52 pm
by rimai
How do you like the Uapp and the whole cloud connection?
Isn't it really nice to see data streaming through?

Re: WIFI Cloud and WIFI Attachment on 2 RA plusses

Posted: Sat Aug 26, 2017 7:18 pm
by ecamFT
yes it is.... i just grabbed an old ipad laying around... i have a huge screen controller now

Thanks for all the help

Re: WIFI Cloud and WIFI Attachment on 2 RA plusses

Posted: Sat Aug 26, 2017 7:20 pm
by ecamFT
i have a few code questions if you are up for it... Like labels now in the UAPP

also need to code in a swabbie (run every 6 hrs for 20 seconds)
and also still need to do some coding on the skimmer (I have a question out on the how do i code section)

Re: WIFI Cloud and WIFI Attachment on 2 RA plusses

Posted: Sat Aug 26, 2017 7:22 pm
by ecamFT
something im noticing is the data is streaming great... but the relay commands keep timing out... the light is still flashing CYAN... and numbers match controller..... but relay commands kepp timing out

Re: WIFI Cloud and WIFI Attachment on 2 RA plusses

Posted: Sat Aug 26, 2017 7:40 pm
by lnevo
The labels you set in the portal. Need to do that with your new account.

Re: WIFI Cloud and WIFI Attachment on 2 RA plusses

Posted: Sat Aug 26, 2017 7:40 pm
by lnevo
I've seen the issue with relays timing out as well btw. But it works fine.

Re: WIFI Cloud and WIFI Attachment on 2 RA plusses

Posted: Sat Aug 26, 2017 8:04 pm
by ecamFT
lnevo wrote:The labels you set in the portal. Need to do that with your new account.

looks like we are back to the first problem... the WIFI unit is communicating to ecam and ecamFT on the portal.
Still not sure how...
So since I have it disconnected its showing unreachable address. and when I update in portal.. nothing happens

Re: WIFI Cloud and WIFI Attachment on 2 RA plusses

Posted: Sat Aug 26, 2017 8:33 pm
by rimai
You are looking at something else that we are not.
http://forum.reefangel.com/status/chart ... &filter=t1
Last time ecam connected to the portal was Thursday.

Re: WIFI Cloud and WIFI Attachment on 2 RA plusses

Posted: Sat Aug 26, 2017 8:34 pm
by rimai
Oh, I think I know what you are seeing.
You must have the port forwarding 2000 sent to your cloud WiFi IP address and not the standard wifi

Re: WIFI Cloud and WIFI Attachment on 2 RA plusses

Posted: Sat Aug 26, 2017 8:36 pm
by rimai
The cloud WiFi is still able to respond to requests on port 2000 just like the old one.

Re: WIFI Cloud and WIFI Attachment on 2 RA plusses

Posted: Sat Aug 26, 2017 9:07 pm
by ecamFT
How should I fix this ?

I never did any port forwarding on cloud ?

Only thing being forwarded the original wifi and they both have Seperate ip.

up

Re: WIFI Cloud and WIFI Attachment on 2 RA plusses

Posted: Sat Aug 26, 2017 9:21 pm
by rimai
Check your router and see where port 2000 is being forward to.
I bet it is to the ip address of cloud wifi if you are saying that you are seeing data from ecamFT.
An easy way to check is to browse to http://yourexternalipaddress:2000/r99
And see what it comes up with.
Change yourexternalipaddress to your external ip address shown in the portal.

Re: WIFI Cloud and WIFI Attachment on 2 RA plusses

Posted: Sun Aug 27, 2017 5:16 am
by binder
ecamFT wrote:Success!!!!!!!!!!!!!!!!!!!! this whole ordeal because of an uppercase E..... SMH

im sooo sorry Roberto.... thank you for the patience and awesome customer service
Wow. that's crazy. About time you guys got it figured out! ;)

Sent from my XT1585 using Tapatalk