Scale or Pressure

Request new hardware or ideas for the controller
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: Scale or Pressure

Post by rimai »

Just changing the gain of the current sensor wouldn't do it.
It can't take not even 1psi.
Water pressure in the pipe is very minimal and that's why we use such small range sensor.
It requires a mod to use a sensor that can measure the range of the CO2 tank.
Roberto.
Paul_Velasco
Posts: 127
Joined: Thu Sep 19, 2013 7:46 am
Location: Saint Cloud, FL

Re: Scale or Pressure

Post by Paul_Velasco »

Sorry 850 to 900
Image
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: Scale or Pressure

Post by rimai »

Are you sure it is not 100?
Roberto.
Paul_Velasco
Posts: 127
Joined: Thu Sep 19, 2013 7:46 am
Location: Saint Cloud, FL

Re: Scale or Pressure

Post by Paul_Velasco »

double post
Last edited by Paul_Velasco on Wed Nov 18, 2015 7:55 pm, edited 1 time in total.
Image
Paul_Velasco
Posts: 127
Joined: Thu Sep 19, 2013 7:46 am
Location: Saint Cloud, FL

Re: Scale or Pressure

Post by Paul_Velasco »

Yes positive. Gauge is 0 - 2000 psi.

Look on link I posted to the exact regulator I am using. First gauge, pressure on tank, is 850-900 PSIG
Image
skehole
Posts: 75
Joined: Fri Feb 13, 2015 4:58 pm

Re: Scale or Pressure

Post by skehole »

Paul_Velasco wrote:
lnevo wrote:Just curious, what would you have to mod to do that? I figured you could change the gain in software like we've done for longer pipes.

What would be cool would be this, plus the ph expansion plus a co2 regulator and have an all in one carbon reactor kit. AlanM built a pwm solenoid I believe that could be used. Let me see if I could dig up the link.
I would buy this! This is a major failure point in my system that keeps me up at night. I lost my entire tank in an ALK spike, due to no CO2. Lost few $1000 in coral.

This is the regulator I am using:

http://www.aquariumplants.com/CarbonDos ... _p/co2.htm

Would it be possible to get a peristalic pump as well to feed the reactor? Would have to be continuous duty.
Why would you have an alk spike with no gas? Are you talking about a drop? If it's caught within a day or so, I don't think you'd have too much ill effect. Drops are MUCH less harmful than spikes ime.

I use the same carbondoser regulator and a masterflex peristaltic pump for my setup and it is fantastic. I would still love to see some more advanced integration with the RA as I believe all the elements are here both minds and hardware.
Image
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: Scale or Pressure

Post by rimai »

Paul_Velasco wrote:Yes positive. Gauge is 0 - 2000 psi.

Look on link I posted to the exact regulator I am using. First gauge, pressure on tank, is 850-900 PSIG
For that kind of pressure, the sensor can't be pcb mount like the one user on the water level expansion.
It would have to be connected with a lead and it cost quite a bit more. Rough estimate would be around $150
Roberto.
Paul_Velasco
Posts: 127
Joined: Thu Sep 19, 2013 7:46 am
Location: Saint Cloud, FL

Re: Scale or Pressure

Post by Paul_Velasco »

rimai wrote:
Paul_Velasco wrote:Yes positive. Gauge is 0 - 2000 psi.

Look on link I posted to the exact regulator I am using. First gauge, pressure on tank, is 850-900 PSIG
For that kind of pressure, the sensor can't be pcb mount like the one user on the water level expansion.
It would have to be connected with a lead and it cost quite a bit more. Rough estimate would be around $150
I am still in, my corals cost me way more!

If you have an integrated system pH, controlled output Solenoid, Pressure Sensor, continuous duty Peristaltic pump, etc I would buy. My basic CARx sytems is $1000+.

Imagine to be able to have full control of the CalRx. Especially if I can control output via a continuous duty peristaltic pump. This would be the ulitmate Calcium Reactor. If someone could just automate the Alk testing reefing would be much easier
Image
Paul_Velasco
Posts: 127
Joined: Thu Sep 19, 2013 7:46 am
Location: Saint Cloud, FL

Re: Scale or Pressure

Post by Paul_Velasco »

Why would you have an alk spike with no gas? Are you talking about a drop? If it's caught within a day or so, I don't think you'd have too much ill effect. Drops are MUCH less harmful than spikes ime.
I am a time limited Reefer. I could literally go a few days with no time to mess with the tank. If I could get a reminder my tank is near empty, I can time a trip to Air-Gas Fill plant or Homebrew Store to get a CO2 fill.

Not spike, but swings in my ALK have caused my tank to go haywire. Killed a tankful back when I first started the tank.
Image
User avatar
lnevo
Posts: 5430
Joined: Fri Jul 20, 2012 9:42 am

Re: Scale or Pressure

Post by lnevo »

Wow I hadn't considered what Alan had said about using the ph to control the solenoid and then with the pressure guage monitoring the tank you'd maintain a pretty rock solid reactor setup...so we have 150 for the sensor, 110 for a ph expansion. Figure around 350 for a full solenoid/ph/digital gauge. We already have the functions pretty much to have a completely integrated calcium reactor setup.
Paul_Velasco
Posts: 127
Joined: Thu Sep 19, 2013 7:46 am
Location: Saint Cloud, FL

Re: Scale or Pressure

Post by Paul_Velasco »

lnevo wrote:Wow I hadn't considered what Alan had said about using the ph to control the solenoid and then with the pressure guage monitoring the tank you'd maintain a pretty rock solid reactor setup...so we have 150 for the sensor, 110 for a ph expansion. Figure around 350 for a full solenoid/ph/digital gauge. We already have the functions pretty much to have a completely integrated calcium reactor setup.
Sounds reasonable!! The regulator I got was $300 no pH control
Image
User avatar
lnevo
Posts: 5430
Joined: Fri Jul 20, 2012 9:42 am

Re: Scale or Pressure

Post by lnevo »

Paul_Velasco wrote:
lnevo wrote:Wow I hadn't considered what Alan had said about using the ph to control the solenoid and then with the pressure guage monitoring the tank you'd maintain a pretty rock solid reactor setup...so we have 150 for the sensor, 110 for a ph expansion. Figure around 350 for a full solenoid/ph/digital gauge. We already have the functions pretty much to have a completely integrated calcium reactor setup.
Sounds reasonable!! The regulator I got was $300 no pH control
And no digital gauge. :)
Paul_Velasco
Posts: 127
Joined: Thu Sep 19, 2013 7:46 am
Location: Saint Cloud, FL

Re: Scale or Pressure

Post by Paul_Velasco »

How about a continuous duty peristaltic pump? Controlled by RA, not that would be the ultimate controllable CALRx Rig.
Image
User avatar
lnevo
Posts: 5430
Joined: Fri Jul 20, 2012 9:42 am

Scale or Pressure

Post by lnevo »

You could add the RA dosing pump or the ATO one to the mix...
Paul_Velasco
Posts: 127
Joined: Thu Sep 19, 2013 7:46 am
Location: Saint Cloud, FL

Re: Scale or Pressure

Post by Paul_Velasco »

lnevo wrote:You could add the RA dosing pump or the ATO one to the mix...
Are these continuous duty?

Anyone working on this? Would be great just to have a controllable solenoid. Big market for those and CALRx
Image
skehole
Posts: 75
Joined: Fri Feb 13, 2015 4:58 pm

Re: Scale or Pressure

Post by skehole »

Paul_Velasco wrote:
lnevo wrote:You could add the RA dosing pump or the ATO one to the mix...
Are these continuous duty?

Anyone working on this? Would be great just to have a controllable solenoid. Big market for those and CALRx
I doubt it. That's why there's such a huge demand in the reefing community for things like Cole parmer masterflex pumps.
Image
User avatar
lnevo
Posts: 5430
Joined: Fri Jul 20, 2012 9:42 am

Scale or Pressure

Post by lnevo »

Do you need continuous duty for a cal reactor?

Its mostly AWC that I've seen for continuous duty.
Paul_Velasco
Posts: 127
Joined: Thu Sep 19, 2013 7:46 am
Location: Saint Cloud, FL

Re: Scale or Pressure

Post by Paul_Velasco »

All suggestions on the Reef Forums is for a continuous flow of water through the Reactor, around 30 ml/hr.
I run a line with my return pump. Would love to be able to control the flow. Right now I am limited to counting drip rate and estimating the flow with eyeball flow meter.

Controllable continuous duty peristaltic pump!!! This would be my ideal.
Image
Paul_Velasco
Posts: 127
Joined: Thu Sep 19, 2013 7:46 am
Location: Saint Cloud, FL

Re: Scale or Pressure

Post by Paul_Velasco »

The pump should be sub $300 price point. I paid about $250 for a used Cole Palmer and it crapped out in about 6 months. Would be willing to pay about 300-400 for a controllable one.
Image
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: Scale or Pressure

Post by rimai »

What is continuous duty and why are they different?
If it is continuous, I would imagine it is not controllable or it would be called variable duty, no?
Roberto.
skehole
Posts: 75
Joined: Fri Feb 13, 2015 4:58 pm

Re: Scale or Pressure

Post by skehole »

I believe it simply implies that it is designed to be running 24/7.

If you ask BRS, for example, if their dosing pumps are designed to be operating 24/7, they will tell you absolutely not. As will most dosing pump manufacturers. For a calcium reactor, water should be pumped in and out at a constant metered pace to keep things consistent. It's very tough to find a pump that is capable of operating constantly, and is capable of overcoming the occasional pressure of clogged effluent lines, etc. it's for this reason why masterflex pumps have such a strong following among calrx users. There are others in the game, kamoer makes a calrx peri pump now, and of course there's the Dastaco calcium reactors thatre at a whole other level.
Image
Paul_Velasco
Posts: 127
Joined: Thu Sep 19, 2013 7:46 am
Location: Saint Cloud, FL

Re: Scale or Pressure

Post by Paul_Velasco »

rimai wrote:What is continuous duty and why are they different?
If it is continuous, I would imagine it is not controllable or it would be called variable duty, no?
The masterflex pumps just change speed to control flow rate.
Image
Post Reply