Automated testing
Re: Automated testing
All our expansion modules are analog and I use an analog to I2C chip, so not much different.
Roberto.
Re: Automated testing
Cool so just a matter of cost on that probe and some math?
Re: Automated testing
Yeah, the Seneye will reportedly try and do it for $200. Also the accuracy of alkalinity value will be affected by the pH and CO2 probes accuracy.
Re: Automated testing
Yeah, for the price of the Seneye, it's not a terrible purchase. Just won't be able to automate anything off it or integrate it into the RA data. Maybe I'll figure out how to scrape it off the web interface and push it to a custom variable
If we could do the same it would be cool though
If we could do the same it would be cool though
Re: Automated testing
I checked on the probe that Roberto linked and thats about $7K. The probe from the research paper is about $720. The one I had linked is rated from 400ppm to 10000ppm which is out of our detection requirements. Average dissolved CO2 in seawater is around 350ppm. However when looking up the CO2 probe I get varying specs even though they look pretty much the same. In the following link the sensor is rated from 0-2000ppm but with an accuracy of 200ppm. The accuracy maybe reduced through longer average sampling. Not sure if it will be viable but I'll try and look some more. Absolute value of alkalinity will probably deviate a large amount, but possibly large sampling and weighing the final number by a titrated calibration value might work.
https://www.seeedstudio.com/Grove-CO2-S ... -1863.html
Tim
https://www.seeedstudio.com/Grove-CO2-S ... -1863.html
Tim
Re: Automated testing
The following probe has better accuracy numbers.
https://www.tindie.com/products/Blueber ... sor-ee893/
https://www.tindie.com/products/Blueber ... sor-ee893/
Re: Automated testing
Here's a website that goes through the calculations for pH, total alkalinity, CO2 and pCO2. It does it backwards from what we would want namely obtaining CO2 from total alkalinity, whereas we would want total alkalinity from CO2 and pH. They also do an iterative process to lock down a converging pH value and alkalinity which is interesting possibly allowing us to get a more stable value if implemented. There is source code on one of the tabs showing the constants that he used and how he does the calculations in code.
http://biocycle.atmos.colostate.edu/shiny/carbonate/
Tim
http://biocycle.atmos.colostate.edu/shiny/carbonate/
Tim
Re: Automated testing
I like that this one is optical.tngo wrote:The following probe has better accuracy numbers.
https://www.tindie.com/products/Blueber ... sor-ee893/
-
- Posts: 133
- Joined: Sun Mar 09, 2014 11:01 am
- Location: Santos - Brazil
Re: Automated testing
I have a planted aquarium with CO2 injection. Would love to have one of this.
Rafa
Rafa
-
- Posts: 133
- Joined: Sun Mar 09, 2014 11:01 am
- Location: Santos - Brazil
Re: Automated testing
Any progress on that? Maybe we could open some kind of crowdfunding to help somehow?
Re: Automated testing
Nothing new, but seneye supposedly released an API on github to access the data. Opens up some good possibities