RA head unit "out of sync" with new release
Re: RA head unit "out of sync" with new release
Can you also post the features file?
I was able to compile and upload it, but want to use the same features to see if I can replicate the problem.
I was able to compile and upload it, but want to use the same features to see if I can replicate the problem.
Roberto.
Re: RA head unit "out of sync" with new release
Here goes...
Thanks, Simon
Code: Select all
#ifndef __REEFANGEL_FEATURES_H__
#define __REEFANGEL_FEATURES_H__
#define OverheatSetup
#define DateTimeSetup
#define VersionMenu
#define StandardLightSetup
#define COLORS_PDE
#define CUSTOM_MAIN
#define FONT_8x8
#define FONT_8x16
//#define FONT_12x16
//#define NUMBERS_8x8
//#define NUMBERS_8x16
//#define NUMBERS_12x16
#define NUMBERS_16x16
#define DisplayLEDPWM
#endif // __REEFANGEL_FEATURES_H__
Re: RA head unit "out of sync" with new release
I was still able to compile and upload fine.
Is this problem happening to any ino code you try or just yours?
Is this problem happening to any ino code you try or just yours?
Roberto.
Re: RA head unit "out of sync" with new release
Both...the first code I posted was using the ControllerTester.ino example code.
Re: RA head unit "out of sync" with new release
What happens when you upload a very small code?
Does it work?
Code: Select all
void setup()
{
Serial.begin(57600);
Serial.println("Test");
}
void loop()
{
}
Roberto.
Re: RA head unit "out of sync" with new release
I tried reinstalling the RAC and then tried to upload your simple code without success and now the RA is unresponsive
Code: Select all
.....edited...
avrdude: Send: V [56] [20] . [00] 4 [34] . [00] [20]
avrdude: Recv: . [14]
avrdude: Recv: . [00]
avrdude: Recv: . [10]
avrdude: Send: V [56] ( [28] . [00] 4 [34] . [00] [20]
avrdude: Recv: . [14]
avrdude: Recv: . [00]
avrdude: Recv: . [10]
avrdude: Send: V [56] [20] . [00] 5 [35] . [00] [20]
avrdude: Recv: . [14]
avrdude: Recv: . [00]
avrdude: Recv: . [10]
avrdude: Send: V [56] ( [28] . [00] 5 [35] . [00] [20]
avrdude: Recv: . [15]
avrdude: stk500_cmd(): programmer is out of sync
Re: RA head unit "out of sync" with new release
So, even on the really small code above it fails?
I think we'll have to repair it.
I think we'll have to repair it.
Roberto.
Re: RA head unit "out of sync" with new release
I'm going to try one more thing before sending it to you...
I will install RAC on my laptop and use that instead of my desktop and see if that makes a difference. Not sure when I will get an opportunity to do this, but I'll report back once its done.
I will install RAC on my laptop and use that instead of my desktop and see if that makes a difference. Not sure when I will get an opportunity to do this, but I'll report back once its done.
Re: RA head unit "out of sync" with new release
Eureka, I found the problem...
When installing RAC on my laptop the TTL drivers did not install properly so I went back to my desktop and manually installed the drivers there - low and behold that did the trick and after uploading the internal memory settings I could upload my custom code
That was an effort, but at least it is finally resolved !!
When installing RAC on my laptop the TTL drivers did not install properly so I went back to my desktop and manually installed the drivers there - low and behold that did the trick and after uploading the internal memory settings I could upload my custom code
That was an effort, but at least it is finally resolved !!