Single ATO

Related to the development libraries, released by Curt Binder

Posts: 38
Joined: Thu May 03, 2012 10:03 am
PostPosted: Thu May 22, 2014 12:47 pm
Hi Guys

If I want to use the SingleATO for the following!

The low-switch controls the sump level and the high-switch to act as a failsafe if the low-switch should get stuck at any time


Sent from my iPhone using Tapatalk

Posts: 12327
Joined: Fri Mar 18, 2011 6:47 pm
PostPosted: Thu May 22, 2014 1:11 pm
Try this:
Code: Select all
ReefAngel.SingleATO(true,Port1,60,0);
if (!ReefAngel.HighATO.IsActive()) ReefAngel.Relay.Off(Port1);
Roberto.

Posts: 38
Joined: Thu May 03, 2012 10:03 am
PostPosted: Fri May 23, 2014 12:03 am
Thanx Roberto!


Sent from my iPhone using Tapatalk

Posts: 38
Joined: Thu May 03, 2012 10:03 am
PostPosted: Tue Jun 03, 2014 7:24 am
Hi Guys! Still Strugling here!

Here is a PIC of how my floats are installed

Image

Image

So I want the lower one (ATOLow) to Control the level and the higher one (ATOHigh) for fail safe if something should happen to the Low switch

Thanks!


Sent from my iPhone using Tapatalk

Posts: 12327
Joined: Fri Mar 18, 2011 6:47 pm
PostPosted: Tue Jun 03, 2014 7:46 am
photos are not showing :(
Roberto.

Posts: 38
Joined: Thu May 03, 2012 10:03 am
PostPosted: Tue Jun 03, 2014 7:54 am
Why?


Sent from my iPhone using Tapatalk

Posts: 38
Joined: Thu May 03, 2012 10:03 am
PostPosted: Tue Jun 03, 2014 7:56 am
They are Installed next to each other! The one higher than the other! With the wires pointing upwards! Hope that makes sense!


Sent from my iPhone using Tapatalk

Posts: 38
Joined: Thu May 03, 2012 10:03 am
PostPosted: Tue Jun 03, 2014 7:57 am
How about now?

Image

Image


Sent from my iPhone using Tapatalk

Posts: 12327
Joined: Fri Mar 18, 2011 6:47 pm
PostPosted: Tue Jun 03, 2014 7:59 am
I think it has to do something with tapatalk :(
Roberto.

Posts: 38
Joined: Thu May 03, 2012 10:03 am
PostPosted: Tue Jun 03, 2014 8:14 am
Okay! But do you make sense of my description?


Sent from my iPhone using Tapatalk
Next

Return to Development Libraries

Who is online

Users browsing this forum: No registered users and 1 guest

cron