Client Suite 3.0

Community contributed apps

Posts: 8
Joined: Sat Jun 09, 2012 10:28 am
PostPosted: Mon Aug 05, 2013 7:31 am
Redadeath wrote:after insatlling fresh new reef angel client suite
i cannot enter the memmory tab

i got the latest online version of libraries Controller is running dev libraries v.1.0.9


Download the RAMemory.ini file for the version of the libraries you are using. 1.1.0 is here:
viewtopic.php?p=34019#p34019

Load the RAMemory.ini file you just downloaded in the RAClient. In RAClient, click Settings, Load Memory File, and select the RAmemory.ini file.

Close the RAClient and open it again. Check to see if you can read memory.
Last edited by Reddy on Mon Nov 11, 2013 7:53 pm, edited 4 times in total.

Posts: 28
Joined: Tue Jan 24, 2012 4:12 pm
PostPosted: Thu Aug 15, 2013 5:36 am
Paulturner911 wrote:This is the error I am getting trying to run the program. I can run the dashboard and listener will run, logger will run, but when I switch notifier on, logger will stop.


Im getting that same error and have tried on different machines with clean installs. seems ill never get this working.

Does anyone know what is going on with the .Net stuff?

Posts: 135
Joined: Tue Jan 24, 2012 6:20 pm
PostPosted: Sat Aug 17, 2013 10:21 am
Okay why cant I see the refresh button anymore under memory. I can connect just fine but I cant scroll down to hit the refresh button. Ive tried everything all the way down to changing screen resolution.... Please help about to throw computer across room. All my tank parameters are showing so I know Im connected.

Posts: 12288
Joined: Fri Mar 18, 2011 6:47 pm
PostPosted: Sat Aug 17, 2013 10:35 am
did you update the ini file?
Roberto.

Posts: 12288
Joined: Fri Mar 18, 2011 6:47 pm
PostPosted: Thu Sep 12, 2013 10:25 am
For v1.0.9 libs, you need this one.
Attachments
RAMemory.ini
(3.4 KiB) Downloaded 145 times
Roberto.

Posts: 8
Joined: Sat Jun 09, 2012 10:28 am
PostPosted: Sun Nov 10, 2013 6:21 pm
rimai wrote:For v1.0.9 libs, you need this one.


Is there a new RAMemory.ini for 1.1.0?

Posts: 12288
Joined: Fri Mar 18, 2011 6:47 pm
PostPosted: Mon Nov 11, 2013 9:27 am
Try this one...
Attachments
RAMemory.ini
(3.82 KiB) Downloaded 153 times
Roberto.

Posts: 6
Joined: Tue Nov 27, 2012 10:11 pm
PostPosted: Wed Nov 20, 2013 3:58 am
My client has stopped working. After I re-install the client it works for a couple of hours then it stops.
Listener has stopped (logger and notifier are both running), and attempts to reconnect don't work.
When I look in settings my ip address/port username and key are all erased. I can't even see the ip/port details unless i choose usb then change back to wifi. If i re-enter my details I am unable to save.

Posts: 2
Joined: Mon Mar 31, 2014 4:22 pm
PostPosted: Mon Mar 31, 2014 8:33 pm
Hi can you help me :roll:

My code:
#include <ReefAngel_Features.h>
#include <Globals.h>
#include <RA_Wifi.h>
#include <Wire.h>
#include <OneWire.h>
#include <Time.h>
#include <DS1307RTC.h>
#include <InternalEEPROM.h>
#include <RA_NokiaLCD.h>
#include <RA_ATO.h>
#include <RA_Joystick.h>
#include <LED.h>
#include <RA_TempSensor.h>
#include <Relay.h>
#include <RA_PWM.h>
#include <Timer.h>
#include <Memory.h>
#include <InternalEEPROM.h>
#include <RA_Colors.h>
#include <RA_CustomColors.h>
#include <Salinity.h>
#include <RF.h>
#include <IO.h>
#include <ORP.h>
#include <AI.h>
#include <PH.h>
#include <WaterLevel.h>
#include <ReefAngel.h>

////// Place global variable code below here


////// Place global variable code above here

//1 1ight
//2 light
//3 Heater
//4 Wp40
//5 ATO
//6 Skimmer
//7 Pompe Remonte
//8 Phosban


void setup()
{
    ReefAngel.Init(); //Initialize controller
    ReefAngel.AddStandardMenu(); // Add Standard Menu
    ReefAngel.FeedingModePorts = Port4Bit | Port6Bit | Port8Bit; // Ports toggled in Water Change Mode
    ReefAngel.WaterChangePorts = Port3Bit | Port5Bit | Port6Bit | Port7Bit | Port8Bit; // Ports toggled when Lights On / Off menu entry selected
    ReefAngel.LightsOnPorts = Port1Bit | Port2Bit; // Ports turned off when Overheat temperature exceeded
    ReefAngel.OverheatShutoffPorts = Port3Bit; // Use T1 probe as temperature and overheat functions
    ReefAngel.TempProbe = T1_PROBE;
    ReefAngel.OverheatProbe = T1_PROBE;
    // Set the Overheat temperature setting
    InternalMemory.OverheatTemp_write( 805 );


    // Ports that are always on
    ReefAngel.Relay.On( Port1 );
    ReefAngel.Relay.On( Port2 );
    ReefAngel.Relay.On( Port4 );
    ReefAngel.Relay.On( Port6 );
    ReefAngel.Relay.On( Port7 );
    ReefAngel.Relay.On( Port8 );

    ////// Place additional initialization code below here
    

    ////// Place additional initialization code above here
}

void loop()
{
    ReefAngel.StandardHeater( Port3,760,769 );
    ReefAngel.StandardATO( Port5,7200 );
    ////// Place your custom code below here
    

    ////// Place your custom code above here

    // This should always be the last line
    ReefAngel.ShowInterface();
}






My errors.., Sorry my log is in french..

*****2014-03-31 23:02:41*****
Message:
La référence d'objet n'est pas définie à une instance d'un objet.
StackTrace:
à ReefAngelWCFListener.ReefAngelListener.GetPortalLabels()

*****2014-03-31 23:02:41*****
Message:
There was an error parsing the query. [ Token line number = 3,Token line offset = 25,Token in error = = ]
StackTrace:
à System.Data.SqlServerCe.SqlCeCommand.ProcessResults(Int32 hr)
à System.Data.SqlServerCe.SqlCeCommand.CompileQueryPlan()
à System.Data.SqlServerCe.SqlCeCommand.ExecuteCommand(CommandBehavior behavior, String method, ResultSetOptions options)
à System.Data.SqlServerCe.SqlCeCommand.ExecuteNonQuery()
à ReefAngelClient.DAO.DataAccess.ExecuteNonQuery(String query)

*****2014-03-31 23:02:41*****
Message:
There was an error parsing the query. [ Token line number = 3,Token line offset = 25,Token in error = = ]
StackTrace:
à System.Data.SqlServerCe.SqlCeCommand.ProcessResults(Int32 hr)
à System.Data.SqlServerCe.SqlCeCommand.CompileQueryPlan()
à System.Data.SqlServerCe.SqlCeCommand.ExecuteCommand(CommandBehavior behavior, String method, ResultSetOptions options)
à System.Data.SqlServerCe.SqlCeCommand.ExecuteNonQuery()
à ReefAngelClient.DAO.DataAccess.ExecuteNonQuery(String query)

*****2014-03-31 23:02:41*****
Message:
There was an error parsing the query. [ Token line number = 3,Token line offset = 25,Token in error = = ]
StackTrace:
à System.Data.SqlServerCe.SqlCeCommand.ProcessResults(Int32 hr)
à System.Data.SqlServerCe.SqlCeCommand.CompileQueryPlan()
à System.Data.SqlServerCe.SqlCeCommand.ExecuteCommand(CommandBehavior behavior, String method, ResultSetOptions options)
à System.Data.SqlServerCe.SqlCeCommand.ExecuteNonQuery()
à ReefAngelClient.DAO.DataAccess.ExecuteNonQuery(String query)

*****2014-03-31 23:02:41*****
Message:
La valeur ne peut pas être null.
Nom du paramètre : String
StackTrace:
à System.Number.StringToNumber(String str, NumberStyles options, NumberBuffer& number, NumberFormatInfo info, Boolean parseDecimal)
à System.Number.ParseInt32(String s, NumberStyles style, NumberFormatInfo info)
à ReefAngelClient.Form1.DisplayMemoryValues()



Thanks
Christian

Posts: 12288
Joined: Fri Mar 18, 2011 6:47 pm
PostPosted: Mon Mar 31, 2014 8:48 pm
Keep going back some posts and you will find a patch.
Roberto.
PreviousNext

Return to Apps

Who is online

Users browsing this forum: No registered users and 1 guest

cron