are you wanting to access a controller online for testing? i still have one online for testing but it appears that it's not responding tonight. i will have to check into it.KRavEN wrote:I know this is old but is something like this still available?
Online Development Testing
Re: Online Development Testing
Right, but always nice to have a development box to bounce things off during development so you don't cause havoc with your production system.arch wrote:I think what you're after is in the Development Libraries section of the forum (wifi attachment commands)
http://forum.reefangel.com/viewtopic.php?f=7&t=1541
Re:
Yes, that's what i was looking for Curt. Thanks for looking into it. I'll check back later.binder wrote:are you wanting to access a controller online for testing? i still have one online for testing but it appears that it's not responding tonight. i will have to check into it.KRavEN wrote:I know this is old but is something like this still available?
Re: Online Development Testing
out of curiosity, what are you wanting to test? this will just allow you to communicate with a controller for testing out apps (like a smartphone or web app) . you will not be able to upload any code at all to the controller.KRavEN wrote: Right, but always nice to have a development box to bounce things off during development so you don't cause havoc with your production system.
Re: Online Development Testing
Well, primarily to create some unit tests to compare return responses to ensure backwards compatibility. I'm working on an ethernet library for the RA that uses a cheap ENC28J60 board connected via SPI.binder wrote:out of curiosity, what are you wanting to test? this will just allow you to communicate with a controller for testing out apps (like a smartphone or web app) . you will not be able to upload any code at all to the controller.KRavEN wrote: Right, but always nice to have a development box to bounce things off during development so you don't cause havoc with your production system.
Re: Online Development Testing
awesome. just making sure we were on the same page with the usage of the online controller.
Re: Online Development Testing
I just updated and switched things around. I updated the host in the original post. I switched from dyn.com (dyndns.com) to no-ip.com. I also updated the firmware on the wifi module and we shall see how well this works. I was having connectivity issues but didn't realize it as it was my test controller.KRavEN wrote: Well, primarily to create some unit tests to compare return responses to ensure backwards compatibility. I'm working on an ethernet library for the RA that uses a cheap ENC28J60 board connected via SPI.
Anyways, you should now be able to access it.
Re: Online Development Testing
Curt, needed another RA to test the iOS app. I tried to get an r99 from this controller and got nothing. I did get the initial ReefAngel Controller Web page banner when testing and now nothing.
Also does this have a relay expansion enabled on it? I want to start testing the option of detecting how many relay bars you have attached. If not, could you add a reference in the code on this one to the second relay box so it is enabled?
Also does this have a relay expansion enabled on it? I want to start testing the option of detecting how many relay bars you have attached. If not, could you add a reference in the code on this one to the second relay box so it is enabled?
Re: Online Development Testing
Sometimes there are issues with it. If you get a reset, just try again. I tested it out internally here and I would get it to display and then I would try something else and it would fail. Then I would try again and it would work. I think it has to do with how fast the requests come in and if there is still an open connection from the controller.
Anyways, just updated it to 1.0.7 with 1 expansion box. I also have a 2nd controller on my network that you can test if you like. It's on port 2010 and it's got 2 expansion boxes plus salinity and water level module enabled (water level isn't connected, only enabled).
Anyways, just updated it to 1.0.7 with 1 expansion box. I also have a 2nd controller on my network that you can test if you like. It's on port 2010 and it's got 2 expansion boxes plus salinity and water level module enabled (water level isn't connected, only enabled).
Re: Online Development Testing
Cool seems better now. At least i could load the banner and then r99.
I will try and get things going to finish up this patch soon. Would really love to support the extra bar when we get a release in.
Also i fixed the relay expansion labels being loaded.
I will try and get things going to finish up this patch soon. Would really love to support the extra bar when we get a release in.
Also i fixed the relay expansion labels being loaded.
Re: Online Development Testing
Not getting any data on either 2000 or 2010
I'm trying to get RA support added for http://www.aquaticlog.com
I'm trying to get RA support added for http://www.aquaticlog.com
Re: Online Development Testing
I just tested it and it's up and working on port 2000. http://curtbinder.no-ip.com:2000/lnevo wrote:Not getting any data on either 2000 or 2010
I'm trying to get RA support added for http://www.aquaticlog.com
I did notice that if you have a page open in a web browser and try to connect to it again or reload the page, it fails and you get the connection reset error.