RA status log

Community contributed apps
Post Reply
User avatar
Rodasphoto
Posts: 187
Joined: Wed Apr 10, 2013 2:48 pm
Location: Athens, Ga
Contact:

RA status log

Post by Rodasphoto »

I checked the log and it's not recording the pH. Does anybody else have this problem?
Image
User avatar
lnevo
Posts: 5430
Joined: Fri Jul 20, 2012 9:42 am

Re: RA status log

Post by lnevo »

Your banner which you have wrong in your signature shows that your ph is 8.04

You need to add [ img ] tags around it [ /img ] (take away the spaces between the brackets. )
User avatar
Rodasphoto
Posts: 187
Joined: Wed Apr 10, 2013 2:48 pm
Location: Athens, Ga
Contact:

Re: RA status log

Post by Rodasphoto »

Thanks for the heads up on how to fix my signature. I have been meaning to fix that. On my phone it logs temp but not pH using the RA Status app.
Image
User avatar
lnevo
Posts: 5430
Joined: Fri Jul 20, 2012 9:42 am

Re: RA status log

Post by lnevo »

Which RA Status app? For Android or iPhone?
User avatar
Rodasphoto
Posts: 187
Joined: Wed Apr 10, 2013 2:48 pm
Location: Athens, Ga
Contact:

Re: RA status log

Post by Rodasphoto »

For Android.
Image
ReEfnWrX
Posts: 234
Joined: Tue Nov 05, 2013 8:40 am
Location: Houston TX

Re: RA status log

Post by ReEfnWrX »

That is strange, everything on the Android App has been working wonderfully for me...

Is it displaying the pH level on your RA display itself?
Image
binder
Posts: 2871
Joined: Fri Mar 18, 2011 6:20 pm
Location: Illinois
Contact:

Re: RA status log

Post by binder »

the value should show on the Android screen unless you have turned off (hidden the visibility) of the ph. check the controller settings and then visibility and make sure ph is checked.
if you view the history, it only shows the temperature values in the list but if you tap on the entry it brings up a window that shows all the values except the relays.
hopefully that helps a little.

Sent from my Nexus 7
User avatar
Rodasphoto
Posts: 187
Joined: Wed Apr 10, 2013 2:48 pm
Location: Athens, Ga
Contact:

Re: RA status log

Post by Rodasphoto »

binder wrote:the value should show on the Android screen unless you have turned off (hidden the visibility) of the ph. check the controller settings and then visibility and make sure ph is checked.
if you view the history, it only shows the temperature values in the list but if you tap on the entry it brings up a window that shows all the values except the relays.
hopefully that helps a little.

Sent from my Nexus 7
The pH is set to display. I can see the pH when I click on each individual time parameters are recorded. I would like to see how it changes over time.
Image
Post Reply