Universal App
Re: Universal App
The the dns isn't working properly. It may be working for the customer service guy cause he is probably on their network. I would suggest trying a different DDNS service. You could use the RA one, would need to look up how though, I don't use it (i need to try)
Re: Universal App
Roberto and lnevo,lnevo wrote:The the dns isn't working properly. It may be working for the customer service guy cause he is probably on their network. I would suggest trying a different DDNS service. You could use the RA one, would need to look up how though, I don't use it (i need to try)
In the end it was my DDNS that wasn't working. i was wrong and i humbly apologize to both of you and also for putting you on a wild goose chase.
There is a link for everyone thats struggling with DDNS service. Follow this link viewtopic.php?t=4754
- GiraffeCat
- Posts: 61
- Joined: Sun Jun 08, 2014 12:55 pm
- Location: Firestone
Re: Universal App
rimai wrote:It works as a standalone on your browser too.
http://www.reefangel.com/download/uapp.zip
You need to use the new dev branch of the libraries or update your current one.
Line 171 of Arduino\libraries\RA_Wifi\RA_Wifi.h should be:It will enable CORS so the browser can make cross origin requests.Code: Select all
const prog_char SERVER_HEADER1[] PROGMEM = "HTTP/1.1 200 OK\r\nServer: ReefAngel\r\nCache-Control: no-store, no-cache, must-revalidate\r\nPragma: no-cache\r\nAccess-Control-Allow-Origin: *\r\nAccess-Control-Allow-Methods: GET\r\nConnection: close\r\nContent-Type: text/";
Let me know if it works.
You must be aware that I have only tested on Google Chrome as browser. I know for a fact that IE9 doesn't work.
Okay. I am running 1.1.3, and line 171 matches in RA_Wifi.h. What do I do with all of the items in the zip file, and where do I navigate to in a browser?
Thank you for leading the blind,
Dan
.....Your forefathers wisely set aside their compassion - Steeled themselves for what needed to be done.......
Re: Universal App
If you are running the new libraries, just browse to the internal Webster very uapp.
http://ipaddress:2000/WiFi
http://ipaddress:2000/WiFi
Roberto.
- GiraffeCat
- Posts: 61
- Joined: Sun Jun 08, 2014 12:55 pm
- Location: Firestone
Re: Universal App
Tried on IE11, Edge, and Amazon Silk. All of them took forever to get the initial page to load. I can enter my controller specifics okay, but on the Status page it stays on "Cloud Server: Connecting..." Any thoughts? Also, what does it mean when it says "Reef Angel Star Board is required"?rimai wrote:If you are running the new libraries, just browse to the internal Webster very uapp.
http://ipaddress:2000/WiFi
Thanks,
Dan
.....Your forefathers wisely set aside their compassion - Steeled themselves for what needed to be done.......
Re: Universal App
It means take out the cloud server settings. Its for a board not yet released
Re: Universal App
What is the cloud server board?
Sent from my SM-G928P using Tapatalk
Sent from my SM-G928P using Tapatalk
Re: Universal App
I have the similar problem with my iPad iOS Uapp since updated to the new iOS release this morning. The status page just display "cloud server: connecting..., Last updated: Never, Forum username: unknown" and never connected. When I tried to access through Safari, it took a long time but eventually connected.GiraffeCat wrote:
Tried on IE11, Edge, and Amazon Silk. All of them took forever to get the initial page to load. I can enter my controller specifics okay, but on the Status page it stays on "Cloud Server: Connecting..." Any thoughts? Also, what does it mean when it says "Reef Angel Star Board is required"?
Portal, Android tablet Reef Status are both working fine.
Currently my iPad is running iOS 9.2.1, Reef Angel Uapp 2.0.5, RA Version 1.1.3.
Re: Universal App
If it says cloud server connecting, you entered something in the cloud server field. You must remove it or the app will try to connect through the cloud server and your controller is not capable.
The cloud server is a feature that will be used on a board not yet released.
I'm going to remove that from the app, since it is causing so much confusion.
So, make sure you don't use the cloud server settings or you will never be able to make the app work for you.
The cloud server is a feature that will be used on a board not yet released.
I'm going to remove that from the app, since it is causing so much confusion.
So, make sure you don't use the cloud server settings or you will never be able to make the app work for you.
Roberto.
Re: Universal App
After removing and reinstalling the RA Uapp on iPad, and not use the cloud server settings, the Uapp is now working great. love the new interface. Thanks, Roberto.rimai wrote:If it says cloud server connecting, you entered something in the cloud server field. You must remove it or the app will try to connect through the cloud server and your controller is not capable.
The cloud server is a feature that will be used on a board not yet released.
I'm going to remove that from the app, since it is causing so much confusion.
So, make sure you don't use the cloud server settings or you will never be able to make the app work for you.
Re: Universal App
+1 and the web interface is looking great as well (when you login to the unit with your IP:2000/wifi)
The only thing that caught me off guard was my labels for the relay wouldn't show but then I found the pull down menu lol.
Thanks
The only thing that caught me off guard was my labels for the relay wouldn't show but then I found the pull down menu lol.
Thanks
Believe it or not.... I can ask even stupider questions than this one.
-
- Posts: 214
- Joined: Sat Oct 10, 2015 9:17 pm
Re: Universal App
How do view relay activity like in portal I can get pwm channel but cant figure out how to see relay graph. The program you put ur ip address in url
Re: Universal App
I was wondering the same thing. I use rely activity graphs to verify if my code is working correctly.troylong45 wrote:How do view relay activity like in portal I can get pwm channel but cant figure out how to see relay graph. The program you put ur ip address in url
Re: Universal App
Roberto was working on this. You could graph the value of R (main relay box) or R1 (relay box 1). It may he hard to read though because its the binary value of the relay box status.
-
- Posts: 214
- Joined: Sat Oct 10, 2015 9:17 pm
Re: Universal App
Looks like it only gives me 1 ready for 2 and it goes from -200 to 0 to 200 scale with some reading of 2 163 and other numbers but only a single line of itlnevo wrote:Roberto was working on this. You could graph the value of R (main relay box) or R1 (relay box 1). It may he hard to read though because its the binary value of the relay box status.
Re: Universal App
They are the decimal representation of the binary state of each relay. So if all relays are off the value is 0. If all relays are on it will be 255. Relay 1 is a value of 1 relay 2 would convert to 2 relay 3 would be 8 relay 4 would be 16 relay 5 would be 32, etc. the total of these numbers would be the result you see graphed. Hopefully Roberto can add the ability for us to display the relay data graph on the portal in the uapp
Re: Universal App
Roberto,
Are you planning to make this UAPP available in Windows Store? I know it can be accessed through web browsers, but it would be really cool if I could pin this app to the start menu, especially on a Windows Phone.
Are you planning to make this UAPP available in Windows Store? I know it can be accessed through web browsers, but it would be really cool if I could pin this app to the start menu, especially on a Windows Phone.
Re: Universal App
There are no plan for that. I don't even know how to create a windows phone app
Roberto.
-
- Posts: 12
- Joined: Tue Apr 07, 2015 11:57 pm
Water Level on new app versio
I recently installed the latest version of uApp on iPhone and can't get the water level readout to move from 0. When I click into the 0 for the detail graph, it does show the correct current level. Is this a bug in the current version? It worked ok in the last version.
Randy Nixon
120g Acrylic Mixed Reef Tank
From: Nashville, TN
120g Acrylic Mixed Reef Tank
From: Nashville, TN
- GiraffeCat
- Posts: 61
- Joined: Sun Jun 08, 2014 12:55 pm
- Location: Firestone
Re: Universal App
I would love a native windows 10 app, as I cannot get the web version to run on IE or Edge properly. With the guide I found here: https://msdn.microsoft.com/en-us/window ... form-guide , it appears you can tailor it to fit whichever devices you want.rimai wrote:There are no plan for that. I don't even know how to create a windows phone app
I would even pay for it. (Who wants money?) A nice full featured Windows 10 app like the U-App is.
Maybe when I am done with my current degree I can take some programming classes, but that won't be for a few years. Coding is tough, from what I hear.
Later,
Dan
.....Your forefathers wisely set aside their compassion - Steeled themselves for what needed to be done.......
-
- Posts: 214
- Joined: Sat Oct 10, 2015 9:17 pm
Re: Universal App
That's weird on my windows 8.1 or what ever it is now won't work expect on IE
-
- Posts: 214
- Joined: Sat Oct 10, 2015 9:17 pm
Re: Universal App
That's weird on my windows 8.1 or what ever it is now won't work expect on IE
-
- Posts: 214
- Joined: Sat Oct 10, 2015 9:17 pm
Re: Universal App
Is there plans to add pwme selection in the graph option on the Web app all there is ,is just temp and PH selection and custom sucks putting in pmwe# everytime for all 6 channels plus the stock ones lol.
Re: Universal App
Make a bookmark in your web app http://forum.reefangel.com/status/chart ... lter=pwme1
Re: Universal App
Is the Android download link working for anyone? I just get "404 not found" error.
Re: Universal App
Robert got the link fixed and it's working again now!paperdesk wrote:Is the Android download link working for anyone? I just get "404 not found" error.
Ted
Re: Universal App
The QR codes are borked.