Reef Angel Dashboard w/ video integration

Requests for new functions or software apps
Post Reply
User avatar
lnevo
Posts: 5430
Joined: Fri Jul 20, 2012 9:42 am

Re: Reef Angel Dashboard w/ video integration

Post by lnevo »

Not without rooting it, then it would just be a simple edit of /etc/hosts :) but then again they have the home/away profile..

But yes that might be a good solution for some. +1
Bruz4023
Posts: 33
Joined: Mon Oct 07, 2013 10:11 am

Re: Reef Angel Dashboard w/ video integration

Post by Bruz4023 »

Sacohen wrote:This is an image of the portal.
Image
How do you get the DC pump section in the portal Mine doesnt show my DC pumps!
User avatar
Sacohen
Posts: 1833
Joined: Sun Apr 21, 2013 6:25 am
Location: Davie, FL

Re: Reef Angel Dashboard w/ video integration

Post by Sacohen »

You have to have the DCPump.h class in your code and then set your pumps to use that. You are probably still using the PWM code for your pump control.
Bruz4023
Posts: 33
Joined: Mon Oct 07, 2013 10:11 am

Re: Reef Angel Dashboard w/ video integration

Post by Bruz4023 »

this is what i have it changes the flow very often! i have the DC pump class

Code: Select all

#include <ReefAngel_Features.h>
#include <Globals.h>
#include <RA_Wifi.h>
#include <Wire.h>
#include <OneWire.h>
#include <Time.h>
#include <DS1307RTC.h>
#include <InternalEEPROM.h>
#include <RA_NokiaLCD.h>
#include <RA_ATO.h>
#include <RA_Joystick.h>
#include <LED.h>
#include <RA_TempSensor.h>
#include <Relay.h>
#include <RA_PWM.h>
#include <Timer.h>
#include <Memory.h>
#include <InternalEEPROM.h>
#include <RA_Colors.h>
#include <RA_CustomColors.h>
#include <Salinity.h>
#include <RF.h>
#include <IO.h>
#include <ORP.h>
#include <AI.h>
#include <PH.h>
#include <WaterLevel.h>
#include <DCPump.h>
#include <ReefAngel.h>

////// Place global variable code below here


////// Place global variable code above here


void setup()
{
    // This must be the first line
    ReefAngel.Init();  //Initialize controller
    ReefAngel.Use2014Screen();  // Let's use 2014 Screen 
    // Ports toggled in Feeding Mode
    ReefAngel.FeedingModePorts = Port5Bit | Port8Bit;
    // Ports toggled in Water Change Mode
    ReefAngel.WaterChangePorts = Port5Bit | Port8Bit;
    // Ports toggled when Lights On / Off menu entry selected
    ReefAngel.LightsOnPorts = Port2Bit | Port3Bit | Port4Bit;
    // Ports turned off when Overheat temperature exceeded
    ReefAngel.OverheatShutoffPorts = Port7Bit;
    // Use T1 probe as temperature and overheat functions
    ReefAngel.TempProbe = T1_PROBE;
    ReefAngel.OverheatProbe = T1_PROBE;
    // Set the Overheat temperature setting
    InternalMemory.OverheatTemp_write( 840 );

    // Feeeding and Water Change mode speed
  //  ReefAngel.DCPump.FeedingSpeed=25;
  //  ReefAngel.DCPump.WaterChangeSpeed=25;


    // Ports that are always on
    ReefAngel.Relay.On( Port5 );
    ReefAngel.Relay.On( Port6 );
    ReefAngel.Relay.On( Port8 );

    ////// Place additional initialization code below here
    

    ////// Place additional initialization code above here
}

void loop()
{
    ReefAngel.StandardATO( Port1,5000 );
    ReefAngel.StandardLights( Port2,7,0,0,0 );
    ReefAngel.StandardLights( Port3,7,0,22,0 );
    ReefAngel.StandardLights( Port4,11,0,23,0 );
    ReefAngel.StandardHeater( Port7,780,790 );
    ReefAngel.PWM.SetChannel( 0, PWMSlope(7,0,23,0,0,100,90,0) );
    ReefAngel.PWM.SetChannel( 1, PWMParabola(10,0,22,0,0,100,0) );
    ReefAngel.PWM.SetChannel( 2, PWMParabola(8,30,20,0,0,100,0) );
    ReefAngel.PWM.SetChannel( 3, PWMSlope(7,30,22,30,0,100,90,0) );
    
    


                  

//Feed Mode Delay on Pump
static boolean feeding=false;
static unsigned long feedingstarted = now();
if (ReefAngel.DisplayedMenu==FEEDING_MODE)
{
  if (!feeding)
  {
  feeding=true;
  feedingstarted = now();
  }
} else {
  feeding=false;

}

///// Place your custom code below here
//IDK Rimai Posted
#define Mem_B_RFMode           VarsStart+55
// Read memory for RF Wave Settings and use for Tunze/Jaebo
int mode;  //=InternalMemory.RFMode_read();
int speed=InternalMemory.RFSpeed_read();
int duration=InternalMemory.RFDuration_read();

// Add random mode if we set to Mode to 12
static int rmode;
if (now()%1800==0) {
  rmode=random(7); // Change the mode twice per hour to modes 0-6
}

static int RSpeed;
if (now()%900==0) {
  RSpeed = random(40,75);
}
else if(RSpeed==0){
  RSpeed = 80;
}
int DurMS;
int DurS;
if (now()%900==0) {
DurMS=random(250,500);
}

if (now()%900==0) {
DurS=random(2,15);
}


if (rmode==6) { 
  // Constant
  ReefAngel.DCPump.UseMemory = false;
    ReefAngel.DCPump.SetMode( Constant,RSpeed,10 );
    ReefAngel.DCPump.DaylightChannel = Sync;
    ReefAngel.DCPump.ActinicChannel = AntiSync;
} 
else if (rmode==1) { 
    // Lagoon
    ReefAngel.DCPump.UseMemory = false;
    ReefAngel.DCPump.SetMode( Lagoon,RSpeed,10 );
    ReefAngel.DCPump.DaylightChannel = Sync;
    ReefAngel.DCPump.ActinicChannel = AntiSync;
} else if (rmode==2) { 
    // Reef Crest
    ReefAngel.DCPump.UseMemory = false;
    ReefAngel.DCPump.SetMode( ReefCrest,RSpeed,10 );
    ReefAngel.DCPump.DaylightChannel = Sync;
    ReefAngel.DCPump.ActinicChannel = AntiSync;
} else if (rmode==3) {  
    // Short Pulse
    ReefAngel.DCPump.UseMemory = false;
    ReefAngel.DCPump.SetMode( ShortPulse,RSpeed,DurMS );
    ReefAngel.DCPump.DaylightChannel = Sync;
    ReefAngel.DCPump.ActinicChannel = AntiSync;
} else if (rmode==0) {
    // Long Pulse
    ReefAngel.DCPump.UseMemory = false;
    ReefAngel.DCPump.SetMode( LongPulse,RSpeed,DurS );
    ReefAngel.DCPump.DaylightChannel = Sync;
    ReefAngel.DCPump.ActinicChannel = AntiSync;
} else if (rmode==5) {
    // Tidal Swell
    ReefAngel.DCPump.UseMemory = false;
    ReefAngel.DCPump.SetMode( TidalSwell,RSpeed,10 );
    ReefAngel.DCPump.DaylightChannel = Sync;
    ReefAngel.DCPump.ActinicChannel = AntiSync;
} else if (rmode==4) {
    // Smart_NTM
    ReefAngel.DCPump.UseMemory = false;
    ReefAngel.DCPump.SetMode( NutrientTransport,RSpeed,250 );
    ReefAngel.DCPump.DaylightChannel = Sync;
    ReefAngel.DCPump.ActinicChannel = AntiSync;
}
// Add night mode (constant 30%)
if (now()%SECS_PER_DAY<30600 || now()%SECS_PER_DAY >=81000) { // Time is before 8:30am and after 10:30pm
    // Long Pulse
    ReefAngel.PWM.SetDaylight( LongPulseMode(0,40,20,true) );
    ReefAngel.PWM.SetActinic( LongPulseMode(0 ,40,5,false) );
}
////// Place your custom code above here

// This should always be the last line
    // This should always be the last line
    ReefAngel.Portal( "Bruz4023" );
    ReefAngel.ShowInterface();
}
Bruz4023
Posts: 33
Joined: Mon Oct 07, 2013 10:11 am

Re: Reef Angel Dashboard w/ video integration

Post by Bruz4023 »

no one had an answer for me?
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: Reef Angel Dashboard w/ video integration

Post by rimai »

I don't think your controller is sending data to the portal.
The last update was 10/15/13.
Roberto.
Post Reply