Not without rooting it, then it would just be a simple edit of /etc/hosts but then again they have the home/away profile..
But yes that might be a good solution for some. +1
Reef Angel Dashboard w/ video integration
Re: Reef Angel Dashboard w/ video integration
How do you get the DC pump section in the portal Mine doesnt show my DC pumps!Sacohen wrote:This is an image of the portal.
Re: Reef Angel Dashboard w/ video integration
You have to have the DCPump.h class in your code and then set your pumps to use that. You are probably still using the PWM code for your pump control.
Re: Reef Angel Dashboard w/ video integration
this is what i have it changes the flow very often! i have the DC pump class
Code: Select all
#include <ReefAngel_Features.h>
#include <Globals.h>
#include <RA_Wifi.h>
#include <Wire.h>
#include <OneWire.h>
#include <Time.h>
#include <DS1307RTC.h>
#include <InternalEEPROM.h>
#include <RA_NokiaLCD.h>
#include <RA_ATO.h>
#include <RA_Joystick.h>
#include <LED.h>
#include <RA_TempSensor.h>
#include <Relay.h>
#include <RA_PWM.h>
#include <Timer.h>
#include <Memory.h>
#include <InternalEEPROM.h>
#include <RA_Colors.h>
#include <RA_CustomColors.h>
#include <Salinity.h>
#include <RF.h>
#include <IO.h>
#include <ORP.h>
#include <AI.h>
#include <PH.h>
#include <WaterLevel.h>
#include <DCPump.h>
#include <ReefAngel.h>
////// Place global variable code below here
////// Place global variable code above here
void setup()
{
// This must be the first line
ReefAngel.Init(); //Initialize controller
ReefAngel.Use2014Screen(); // Let's use 2014 Screen
// Ports toggled in Feeding Mode
ReefAngel.FeedingModePorts = Port5Bit | Port8Bit;
// Ports toggled in Water Change Mode
ReefAngel.WaterChangePorts = Port5Bit | Port8Bit;
// Ports toggled when Lights On / Off menu entry selected
ReefAngel.LightsOnPorts = Port2Bit | Port3Bit | Port4Bit;
// Ports turned off when Overheat temperature exceeded
ReefAngel.OverheatShutoffPorts = Port7Bit;
// Use T1 probe as temperature and overheat functions
ReefAngel.TempProbe = T1_PROBE;
ReefAngel.OverheatProbe = T1_PROBE;
// Set the Overheat temperature setting
InternalMemory.OverheatTemp_write( 840 );
// Feeeding and Water Change mode speed
// ReefAngel.DCPump.FeedingSpeed=25;
// ReefAngel.DCPump.WaterChangeSpeed=25;
// Ports that are always on
ReefAngel.Relay.On( Port5 );
ReefAngel.Relay.On( Port6 );
ReefAngel.Relay.On( Port8 );
////// Place additional initialization code below here
////// Place additional initialization code above here
}
void loop()
{
ReefAngel.StandardATO( Port1,5000 );
ReefAngel.StandardLights( Port2,7,0,0,0 );
ReefAngel.StandardLights( Port3,7,0,22,0 );
ReefAngel.StandardLights( Port4,11,0,23,0 );
ReefAngel.StandardHeater( Port7,780,790 );
ReefAngel.PWM.SetChannel( 0, PWMSlope(7,0,23,0,0,100,90,0) );
ReefAngel.PWM.SetChannel( 1, PWMParabola(10,0,22,0,0,100,0) );
ReefAngel.PWM.SetChannel( 2, PWMParabola(8,30,20,0,0,100,0) );
ReefAngel.PWM.SetChannel( 3, PWMSlope(7,30,22,30,0,100,90,0) );
//Feed Mode Delay on Pump
static boolean feeding=false;
static unsigned long feedingstarted = now();
if (ReefAngel.DisplayedMenu==FEEDING_MODE)
{
if (!feeding)
{
feeding=true;
feedingstarted = now();
}
} else {
feeding=false;
}
///// Place your custom code below here
//IDK Rimai Posted
#define Mem_B_RFMode VarsStart+55
// Read memory for RF Wave Settings and use for Tunze/Jaebo
int mode; //=InternalMemory.RFMode_read();
int speed=InternalMemory.RFSpeed_read();
int duration=InternalMemory.RFDuration_read();
// Add random mode if we set to Mode to 12
static int rmode;
if (now()%1800==0) {
rmode=random(7); // Change the mode twice per hour to modes 0-6
}
static int RSpeed;
if (now()%900==0) {
RSpeed = random(40,75);
}
else if(RSpeed==0){
RSpeed = 80;
}
int DurMS;
int DurS;
if (now()%900==0) {
DurMS=random(250,500);
}
if (now()%900==0) {
DurS=random(2,15);
}
if (rmode==6) {
// Constant
ReefAngel.DCPump.UseMemory = false;
ReefAngel.DCPump.SetMode( Constant,RSpeed,10 );
ReefAngel.DCPump.DaylightChannel = Sync;
ReefAngel.DCPump.ActinicChannel = AntiSync;
}
else if (rmode==1) {
// Lagoon
ReefAngel.DCPump.UseMemory = false;
ReefAngel.DCPump.SetMode( Lagoon,RSpeed,10 );
ReefAngel.DCPump.DaylightChannel = Sync;
ReefAngel.DCPump.ActinicChannel = AntiSync;
} else if (rmode==2) {
// Reef Crest
ReefAngel.DCPump.UseMemory = false;
ReefAngel.DCPump.SetMode( ReefCrest,RSpeed,10 );
ReefAngel.DCPump.DaylightChannel = Sync;
ReefAngel.DCPump.ActinicChannel = AntiSync;
} else if (rmode==3) {
// Short Pulse
ReefAngel.DCPump.UseMemory = false;
ReefAngel.DCPump.SetMode( ShortPulse,RSpeed,DurMS );
ReefAngel.DCPump.DaylightChannel = Sync;
ReefAngel.DCPump.ActinicChannel = AntiSync;
} else if (rmode==0) {
// Long Pulse
ReefAngel.DCPump.UseMemory = false;
ReefAngel.DCPump.SetMode( LongPulse,RSpeed,DurS );
ReefAngel.DCPump.DaylightChannel = Sync;
ReefAngel.DCPump.ActinicChannel = AntiSync;
} else if (rmode==5) {
// Tidal Swell
ReefAngel.DCPump.UseMemory = false;
ReefAngel.DCPump.SetMode( TidalSwell,RSpeed,10 );
ReefAngel.DCPump.DaylightChannel = Sync;
ReefAngel.DCPump.ActinicChannel = AntiSync;
} else if (rmode==4) {
// Smart_NTM
ReefAngel.DCPump.UseMemory = false;
ReefAngel.DCPump.SetMode( NutrientTransport,RSpeed,250 );
ReefAngel.DCPump.DaylightChannel = Sync;
ReefAngel.DCPump.ActinicChannel = AntiSync;
}
// Add night mode (constant 30%)
if (now()%SECS_PER_DAY<30600 || now()%SECS_PER_DAY >=81000) { // Time is before 8:30am and after 10:30pm
// Long Pulse
ReefAngel.PWM.SetDaylight( LongPulseMode(0,40,20,true) );
ReefAngel.PWM.SetActinic( LongPulseMode(0 ,40,5,false) );
}
////// Place your custom code above here
// This should always be the last line
// This should always be the last line
ReefAngel.Portal( "Bruz4023" );
ReefAngel.ShowInterface();
}
Re: Reef Angel Dashboard w/ video integration
no one had an answer for me?
Re: Reef Angel Dashboard w/ video integration
I don't think your controller is sending data to the portal.
The last update was 10/15/13.
The last update was 10/15/13.
Roberto.