Different settings for 2 different DC Pumps.

Requests for new functions or software apps
User avatar
Posts: 5349
Joined: Fri Jul 20, 2012 9:42 am
PostPosted: Thu Sep 11, 2014 12:18 pm
As far as I know you just have to reset the device.
User avatar
Posts: 1833
Joined: Sun Apr 21, 2013 6:25 am
Location: Davie, FL
PostPosted: Thu Sep 11, 2014 12:23 pm
No. The pump will just stop and you will need to pull the power from it to get it started again.

Posts: 263
Joined: Wed Jan 01, 2014 7:26 am
PostPosted: Fri Sep 12, 2014 8:13 am
The default threshold if you've never run the dev code before should be 30 percent. Did that not happen? I tried to detect if that memory location had anything in it and if it didn't it would do 30% and write that there until you change it to something else.

The new RW series Jebao pumps can supposedly be run down to 10%, but that's with the Jebao controllers, so it's possible that it's not really 10% of 0-5V, just that the controller has 10 speed settings to choose from which the retailers market as "can be dimmed down to 10%." I'm getting some in the next few days, so I'll let folks know at what voltage they cut off.

Posts: 234
Joined: Tue Nov 05, 2013 8:40 am
Location: Houston TX
PostPosted: Fri Sep 12, 2014 4:12 pm
Sacohen wrote:I have a WP-25 and a WP-40.
The cut off on my WP-40 is 25% and my WP-25 is 30%.
I can't say that is the limit for all of them thought.


It's not. My WP-40 turns off at 19% and my WP-25 turns off at 24% Connected to Daylight/Actinic channels


Out of curiosity, which ports are you using? I wonder if they cut off at different %'s based on whether they are connected via Analog dimming/PWM Dimming / Actinic-Daylight channels.
Image
User avatar
Posts: 1833
Joined: Sun Apr 21, 2013 6:25 am
Location: Davie, FL
PostPosted: Fri Sep 12, 2014 4:30 pm
My 40 is on the actinic and my 25 is on the daylight. PWM.
Previous

Return to Requests

Who is online

Users browsing this forum: No registered users and 2 guests

cron