dosing code???

Requests for new functions or software apps

Posts: 71
Joined: Fri Dec 28, 2012 2:26 pm
PostPosted: Sun Dec 01, 2013 11:01 pm
so i finially got around to hooking all my new expansions today ( dimming, moonlight , dc power controller, expansion hub and dosing pumps). im trying to set up my dosing pumps for my 2 part. i would like to have them each run twice per 24 hours i want my alk to be doses at 9 pm and 9am and my calc to go from 10 pm and 10am. im looking to dose 35 ml per dose.

i tryed to figure this out with the wizard but got confused. i dont want to switch to the new dosing system till i have the code is worked out. any help would be awesome heres my code if it helps.

Code: Select all
#include <ReefAngel_Features.h>
#include <Globals.h>
#include <RA_Wifi.h>
#include <Wire.h>
#include <OneWire.h>
#include <Time.h>
#include <DS1307RTC.h>
#include <InternalEEPROM.h>
#include <RA_NokiaLCD.h>
#include <RA_ATO.h>
#include <RA_Joystick.h>
#include <LED.h>
#include <RA_TempSensor.h>
#include <Relay.h>
#include <RA_PWM.h>
#include <Timer.h>
#include <Memory.h>
#include <InternalEEPROM.h>
#include <RA_Colors.h>
#include <RA_CustomColors.h>
#include <Salinity.h>
#include <RF.h>
#include <IO.h>
#include <ORP.h>
#include <AI.h>
#include <PH.h>
#include <WaterLevel.h>
#include <Humidity.h>
#include <DCPump.h>
#include <ReefAngel.h>

////// Place global variable code below here

////// Place global variable code above here

void setup()
    // This must be the first line
    ReefAngel.Init();  //Initialize controller
    ReefAngel.Use2014Screen();  // Let's use 2014 Screen
    // Ports toggled in Feeding Mode
    ReefAngel.FeedingModePorts = Port3Bit | Port8Bit;
    ReefAngel.FeedingModePortsE[0] = 0;
    // Ports toggled in Water Change Mode
    ReefAngel.WaterChangePorts = Port3Bit | Port4Bit | Port5Bit | Port7Bit | Port8Bit;
    ReefAngel.WaterChangePortsE[0] = 0;
    // Ports toggled when Lights On / Off menu entry selected
    ReefAngel.LightsOnPorts = Port1Bit | Port2Bit | Port6Bit;
    ReefAngel.LightsOnPortsE[0] = 0;
    // Ports turned off when Overheat temperature exceeded
    ReefAngel.OverheatShutoffPorts = Port2Bit | Port3Bit | Port6Bit | Port7Bit;
    ReefAngel.OverheatShutoffPortsE[0] = 0;
    // Use T1 probe as temperature and overheat functions
    ReefAngel.TempProbe = T1_PROBE;
    ReefAngel.OverheatProbe = T1_PROBE;
    // Set the Overheat temperature setting
    InternalMemory.OverheatTemp_write( 830 );

    // Feeeding and Water Change mode speed

    // Ports that are always on
    ReefAngel.Relay.On( Port5 );
    ReefAngel.Relay.On( Port8 );
    ReefAngel.Relay.On( Box1_Port1 );
    ReefAngel.Relay.On( Box1_Port2 );
    ReefAngel.Relay.On( Box1_Port3 );
    ReefAngel.Relay.On( Box1_Port4 );
    ReefAngel.Relay.On( Box1_Port5 );
    ReefAngel.Relay.On( Box1_Port6 );
    ReefAngel.Relay.On( Box1_Port7 );
    ReefAngel.Relay.On( Box1_Port8 );

    ////// Place additional initialization code below here

    ////// Place additional initialization code above here

void loop()
    ReefAngel.StandardLights( Port1,21,0,9,0 );
    ReefAngel.StandardLights( Port2,9,0,19,0 );
    ReefAngel.Relay.DelayedOn( Port3,25 );
    ReefAngel.SingleATO( true,Port4,90,0 );
    ReefAngel.StandardLights( Port6,8,0,21,0 );
    ReefAngel.StandardHeater( Port7,785,790 );
    ReefAngel.PWM.SetChannel( 5, MoonPhase() );
    ReefAngel.DCPump.UseMemory = false;
    ReefAngel.DCPump.SetMode( ReefCrest,100,10 );
    ReefAngel.DCPump.DaylightChannel = None;
    ReefAngel.DCPump.ActinicChannel = None;
    ReefAngel.DCPump.ExpansionChannel[0] = None;
    ReefAngel.DCPump.ExpansionChannel[1] = None;
    ReefAngel.DCPump.ExpansionChannel[2] = None;
    ReefAngel.DCPump.ExpansionChannel[3] = None;
    ReefAngel.DCPump.ExpansionChannel[4] = None;
    ReefAngel.DCPump.ExpansionChannel[5] = None;
    ////// Place your custom code below here

    ////// Place your custom code above here

    // This should always be the last line
    ReefAngel.Portal( "paulweck" );

Posts: 11973
Joined: Fri Mar 18, 2011 6:47 pm
PostPosted: Mon Dec 02, 2013 9:09 am
Try this:
Code: Select all
ReefAngel.DosingPumpRepeat(Box1_Port1,540,720,45); // Alk Dose every 720 minutes with 540 minutes offset for 45 seconds
ReefAngel.DosingPumpRepeat(Box1_Port2,600,720,45); // Ca Dose every 720 minutes with 600 minutes offset for 45 seconds

Posts: 71
Joined: Fri Dec 28, 2012 2:26 pm
PostPosted: Mon Dec 02, 2013 4:41 pm
Thanks Roberto. i place this in the custom code section right

Return to Requests

Who is online

Users browsing this forum: No registered users and 1 guest