Code: Select all
#include <ReefAngel_Features.h>
#include <Globals.h>
#include <RA_Wifi.h>
#include <Wire.h>
#include <OneWire.h>
#include <Time.h>
#include <DS1307RTC.h>
#include <InternalEEPROM.h>
#include <RA_NokiaLCD.h>
#include <RA_ATO.h>
#include <RA_Joystick.h>
#include <LED.h>
#include <RA_TempSensor.h>
#include <Relay.h>
#include <RA_PWM.h>
#include <Timer.h>
#include <Memory.h>
#include <InternalEEPROM.h>
#include <RA_Colors.h>
#include <RA_CustomColors.h>
#include <Salinity.h>
#include <RF.h>
#include <IO.h>
#include <ORP.h>
#include <AI.h>
#include <PH.h>
#include <WaterLevel.h>
#include <Humidity.h>
#include <DCPump.h>
#include <ReefAngel.h>
////// Place global variable code below here
////// Place global variable code above here
void setup()
{
// This must be the first line
ReefAngel.Init(); //Initialize controller
ReefAngel.Use2014Screen(); // Let's use 2014 Screen
ReefAngel.AddPHExpansion(); // pH Expansion Module
// Ports toggled in Feeding Mode
ReefAngel.FeedingModePorts = 0;
ReefAngel.FeedingModePortsE[0] = Port1Bit | Port2Bit | Port4Bit;
// Ports toggled in Water Change Mode
ReefAngel.WaterChangePorts = 0;
ReefAngel.WaterChangePortsE[0] = Port1Bit | Port2Bit | Port4Bit;
// Ports toggled when Lights On / Off menu entry selected
ReefAngel.LightsOnPorts = Port1Bit | Port2Bit | Port3Bit | Port4Bit | Port5Bit | Port6Bit;
ReefAngel.LightsOnPortsE[0] = 0;
// Ports turned off when Overheat temperature exceeded
ReefAngel.OverheatShutoffPorts = Port1Bit | Port2Bit | Port3Bit | Port4Bit | Port5Bit | Port6Bit | Port8Bit;
ReefAngel.OverheatShutoffPortsE[0] = Port3Bit | Port4Bit | Port5Bit;
// Use T1 probe as temperature and overheat functions
ReefAngel.TempProbe = T1_PROBE;
ReefAngel.OverheatProbe = T1_PROBE;
// Set the Overheat temperature setting
InternalMemory.OverheatTemp_write( 829 );
// Feeeding and Water Change mode speed
ReefAngel.DCPump.FeedingSpeed=0;
ReefAngel.DCPump.WaterChangeSpeed=0;
// Ports that are always on
ReefAngel.Relay.On( Box1_Port1 );
ReefAngel.Relay.On( Box1_Port2 );
ReefAngel.Relay.On( Box1_Port7 );
ReefAngel.Relay.On( Box1_Port8 );
////// Place additional initialization code below here
////// Place additional initialization code above here
}
void loop()
{
ReefAngel.StandardLights( Port1,15,0,20,0 );
ReefAngel.StandardLights( Port2,15,0,20,30 );
ReefAngel.StandardLights( Port3,14,0,22,0 );
ReefAngel.StandardLights( Port4,15,0,20,0 );
ReefAngel.StandardLights( Port5,14,30,22,30 );
ReefAngel.StandardLights( Port6,14,0,22,0 );
ReefAngel.StandardLights( Port7,22,0,14,0 );
ReefAngel.StandardHeater( Port8,775,810 );
ReefAngel.StandardLights( Box1_Port3,22,0,0,0 );
ReefAngel.StandardLights( Box1_Port4,23,0,13,0 );
ReefAngel.StandardLights( Box1_Port5,0,0,15,0 );
ReefAngel.SingleATO( true,Box1_Port6,66,0 );
ReefAngel.PWM.SetChannel( 0, PWMParabola(15,0,20,0,0,100,0) );
ReefAngel.PWM.SetChannel( 1, PWMParabola(14,0,22,0,5,100,5) );
ReefAngel.PWM.SetChannel( 2, PWMParabola(14,0,22,0,20,100,20) );
ReefAngel.PWM.SetChannel( 3, MoonPhase() );
ReefAngel.DCPump.UseMemory = false;
ReefAngel.DCPump.SetMode( Lagoon,50,10 );
ReefAngel.DCPump.DaylightChannel = Sync;
ReefAngel.DCPump.ActinicChannel = Sync;
ReefAngel.DCPump.ExpansionChannel[0] = None;
ReefAngel.DCPump.ExpansionChannel[1] = None;
ReefAngel.DCPump.ExpansionChannel[2] = None;
ReefAngel.DCPump.ExpansionChannel[3] = None;
ReefAngel.DCPump.ExpansionChannel[4] = None;
ReefAngel.DCPump.ExpansionChannel[5] = None;
////// Place your custom code below here
////// Place your custom code above here
// This should always be the last line
ReefAngel.Portal( "Dctrojan" );
ReefAngel.ShowInterface();
}
"Girlfriends pissed". This weekend i plan on upgrading my current 55 to the new tank. for now im working on getting everything ready. Im going to be using the reef angel plus (analog) to control my tank. I recently bought the expansion hub and the dimming expansion to control everything. My leds are all analog, and i want to be able to control both my leds and the powerhead as well as the return pump. My question is with the expansion module, Im confused as of what does the expansion module needs to be set on to control the pumps (analog or PWM) 0-5V or 5-10? also how should i hook up the leds if i need to control 3 channels ? all to the dimming expansion or to the relay expansion? or should i hook up the jebao and the dc pump to another (+-) on the relay box or my other relay expansion box? Ive also got 3 lunar lights and the dimmable lunar expansion module. If i remember right i think i used my RA+ head unit to wire my lunar lighta through. 
