Custom Main Screens

Would you like to help?
Share your walkthrough tutorial with others
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: Custom Main Screens

Post by rimai »

Super cool!!!
Can you post the code?
Roberto.
ReeferBee
Posts: 55
Joined: Wed May 08, 2013 6:23 pm
Location: North GA

Re: Custom Main Screens

Post by ReeferBee »

Thanks!
Done :)
Barry

Current tank info: 150g mixed reef

"Some of the worst mistakes of my life were hair cuts" -Jim Morrison
binder
Posts: 2871
Joined: Fri Mar 18, 2011 6:20 pm
Location: Illinois
Contact:

Re: Custom Main Screens

Post by binder »

ReeferBee wrote:Thanks!
Done :)
Very nice looking screen! Great job!
Poiromaniax
Posts: 180
Joined: Thu Apr 05, 2012 6:20 am
Location: JHB, South Africa

Custom Main Screens

Post by Poiromaniax »

binder wrote:
ReeferBee wrote:Thanks!
Done :)
Very nice looking screen! Great job!

Agreed! Good job ReeferBee

I'm gonna use the basic layout and change a few parameters
Image
jegillis
Posts: 86
Joined: Sat Jan 04, 2014 10:26 am

Re: Custom Main Screens

Post by jegillis »

IMAG0800.jpg
IMAG0800.jpg (54.87 KiB) Viewed 10284 times

Code: Select all

byte ActinicPWMValue=0;
byte DaylightPWMValue=0;
void DrawCustomMain()
{
  byte x = 6;
  byte y = 2;
  byte t;
  char text[7];
  //static byte vtechmode=0;

  ReefAngel.LCD.DrawDate(6, 2);
  ReefAngel.LCD.Clear(COLOR_BLACK, 1, 11, 132, 11);
  pingSerial();
  
  ReefAngel.LCD.DrawLargeText(3,255,8,16,"Redneck Reefin!", Font8x8);
  ReefAngel.LCD.DrawLargeText(3,255,8,56,"Jason & Sarah's", Font8x8);
  ReefAngel.LCD.DrawLargeText(3,255,32,65,"Money Pit", Font8x8);
  pingSerial();

  ReefAngel.LCD.DrawText(COLOR_BLACK,255, 6, 90, "--------------------");
  ReefAngel.LCD.DrawText(COLOR_BLACK,255, 6, 126, "--------------------");
  ReefAngel.LCD.DrawText(COLOR_BLACK,255, 2, 93, "|");
  ReefAngel.LCD.DrawText(COLOR_BLACK,255, 2, 103, "|");
  ReefAngel.LCD.DrawText(COLOR_BLACK,255, 2, 113, "|");
  ReefAngel.LCD.DrawText(COLOR_BLACK,255, 2, 123, "|");
  ReefAngel.LCD.DrawText(COLOR_BLACK,255, 126, 93, "|");
  ReefAngel.LCD.DrawText(COLOR_BLACK,255, 126, 103, "|");
  ReefAngel.LCD.DrawText(COLOR_BLACK,255, 126, 113, "|");
  ReefAngel.LCD.DrawText(COLOR_BLACK,255, 126, 123, "|");


  ReefAngel.LCD.DrawText(0,255,10,30,"Display");
  ConvertNumToString(text, ReefAngel.Params.Temp[T1_PROBE], 10);
  ReefAngel.LCD.DrawLargeText(COLOR_BLACK, 255, 10, 40, text, Num8x16);
  pingSerial();

  ReefAngel.LCD.DrawText(0,255,100,30,"pH");
  ConvertNumToString(text, ReefAngel.Params.PH, 100);
  ReefAngel.LCD.DrawLargeText(COLOR_BLACK, 255, 85, 40, text, Num8x16);
  pingSerial();

  byte TempRelay = ReefAngel.Relay.RelayData;
  TempRelay &= ReefAngel.Relay.RelayMaskOff;
  TempRelay |= ReefAngel.Relay.RelayMaskOn;
  ReefAngel.LCD.DrawOutletBox(12, 77, TempRelay);

  ReefAngel.LCD.DrawText(0,255,8,109, "CWLED");  
  ReefAngel.LCD.DrawText(COLOR_BLACK,255,15,119, ReefAngel.PWM.GetDaylightValue());
  //ReefAngel.PWM.GetDaylightValue(), 
  ReefAngel.LCD.DrawText(0,255,88,108, "RBLED");  
  ReefAngel.LCD.DrawText(COLOR_BLACK,255,90,119, ReefAngel.PWM.GetActinicValue());
  //ReefAngel.PWM.GetActinicValue());
  
  //ReefAngel.LCD.DrawMonitor(15, 60, ReefAngel.Params,
                            //ReefAngel.PWM.GetDaylightValue(), 
                            //ReefAngel.PWM.GetActinicValue());

}
void DrawCustomGraph()
{
}
Image
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: Custom Main Screens

Post by rimai »

I like it :)
Roberto.
jegillis
Posts: 86
Joined: Sat Jan 04, 2014 10:26 am

Re: Custom Main Screens

Post by jegillis »

IMAG0801.jpg
IMAG0801.jpg (45.11 KiB) Viewed 10274 times
Well that didn't last long before I had to tinker would anyone have an idea on how I could have the temps change color if they are over a set limit?

Code: Select all

#define SIMPLE_MENU
#define NUMBERS_8x16
#define FONT_8x8

#include <ReefAngel_Features.h>
#include <Globals.h>
#include <RA_Wifi.h>
#include <Wire.h>
#include <OneWire.h>
#include <Time.h>
#include <DS1307RTC.h>
#include <InternalEEPROM.h>
#include <RA_NokiaLCD.h>
#include <RA_ATO.h>
#include <RA_Joystick.h>
#include <LED.h>
#include <RA_TempSensor.h>
#include <Relay.h>
#include <RA_PWM.h>
#include <Timer.h>
#include <Memory.h>
#include <InternalEEPROM.h>
#include <RA_Colors.h>
#include <RA_CustomColors.h>
#include <Salinity.h>
#include <RF.h>
#include <IO.h>
#include <ORP.h>
#include <AI.h>
#include <PH.h>
#include <WaterLevel.h>
#include <Humidity.h>
#include <DCPump.h>
#include <ReefAngel.h>

////// Place global variable code below here
byte ActinicPWMValue=0;
byte DaylightPWMValue=0;
void DrawCustomMain()
{
  byte x = 6;
  byte y = 2;
  byte t;
  char text[7];
  //static byte vtechmode=0;

  ReefAngel.LCD.DrawDate(6, 2);
  ReefAngel.LCD.Clear(COLOR_BLACK, 1, 11, 132, 11);
  pingSerial();
  
  ReefAngel.LCD.DrawLargeText(3,255,8,14,"Redneck Reefin!", Font8x8);
  ReefAngel.LCD.DrawLargeText(3,255,8,55,"Jason & Sarah's", Font8x8);
  ReefAngel.LCD.DrawLargeText(3,255,32,64,"Money Pit", Font8x8);
  pingSerial();

  ReefAngel.LCD.DrawText(COLOR_RED,255, 6, 88, "--------------------");
  ReefAngel.LCD.DrawText(COLOR_RED,255, 6, 125, "--------------------");
  ReefAngel.LCD.DrawText(COLOR_RED,255, 2, 93, "|");
  ReefAngel.LCD.DrawText(COLOR_RED,255, 2, 103, "|");
  ReefAngel.LCD.DrawText(COLOR_RED,255, 2, 113, "|");
  ReefAngel.LCD.DrawText(COLOR_RED,255, 2, 123, "|");
  ReefAngel.LCD.DrawText(COLOR_RED,255, 126, 93, "|");
  ReefAngel.LCD.DrawText(COLOR_RED,255, 126, 103, "|");
  ReefAngel.LCD.DrawText(COLOR_RED,255, 126, 113, "|");
  ReefAngel.LCD.DrawText(COLOR_RED,255, 126, 123, "|");

  ReefAngel.LCD.DrawLargeText(0,255,8,25,"TANK", Font8x8);
  ConvertNumToString(text, ReefAngel.Params.Temp[T1_PROBE], 10);
  ReefAngel.LCD.DrawLargeText(224, 255, 42, 25, text, Font8x8);
  pingSerial();
  
  ReefAngel.LCD.DrawLargeText(0,255,8,35,"HOOD", Font8x8);
  ConvertNumToString(text, ReefAngel.Params.Temp[T2_PROBE], 10);
  ReefAngel.LCD.DrawLargeText(153, 255, 42, 35, text, Font8x8);
  pingSerial();
  
  ReefAngel.LCD.DrawLargeText(0,255,8,45,"ROOM", Font8x8);
  ConvertNumToString(text, ReefAngel.Params.Temp[T3_PROBE], 10);
  ReefAngel.LCD.DrawLargeText(66, 255, 42, 45, text, Font8x8);

  ReefAngel.LCD.DrawText(0,255,100,25,"pH");
  ConvertNumToString(text, ReefAngel.Params.PH, 100);
  ReefAngel.LCD.DrawLargeText(COLOR_BLACK, 255, 85, 35, text, Num8x16);
  pingSerial();

  byte TempRelay = ReefAngel.Relay.RelayData;
  TempRelay &= ReefAngel.Relay.RelayMaskOff;
  TempRelay |= ReefAngel.Relay.RelayMaskOn;
  ReefAngel.LCD.DrawOutletBox(12, 75, TempRelay);
  pingSerial();
  
    ReefAngel.LCD.DrawText(0,255,8,96, "White=");  
  ReefAngel.LCD.DrawText(197,255,46,96, ReefAngel.PWM.GetDaylightValue());
  //ReefAngel.PWM.GetDaylightValue()), 
  ReefAngel.LCD.DrawText(0,255,72,96, "Blue=");   
  ReefAngel.LCD.DrawText(3,255,106,96, ReefAngel.PWM.GetActinicValue());
  //ReefAngel.PWM.GetActinicValue());


}
void DrawCustomGraph()
{
}


////// Place global variable code above here


void setup()
{
    // This must be the first line
    ReefAngel.Init();  //Initialize controller
    ReefAngel.Use2014Screen();  // Let's use 2014 Screen 
    // Ports toggled in Feeding Mode
    ReefAngel.FeedingModePorts = Port5Bit | Port6Bit;
    // Ports toggled in Water Change Mode
    ReefAngel.WaterChangePorts = Port1Bit | Port5Bit | Port6Bit | Port8Bit;
    // Ports toggled when Lights On / Off menu entry selected
    ReefAngel.LightsOnPorts = Port3Bit | Port4Bit;
    // Ports turned off when Overheat temperature exceeded
    ReefAngel.OverheatShutoffPorts = Port3Bit | Port4Bit;
    // Use T1 probe as temperature and overheat functions
    ReefAngel.TempProbe = T1_PROBE;
    ReefAngel.OverheatProbe = T1_PROBE;
 
    ////// Place additional initialization code below here
    

    ////// Place additional initialization code above here
}

void loop()
{
    ReefAngel.SingleATOLow( Port1 );
    ReefAngel.Relay.Set( Port2, !ReefAngel.Relay.Status( Port3 ) );
    ReefAngel.ActinicLights( Port3 );
    ReefAngel.DayLights( Port4 );
    ReefAngel.Wavemaker1( Port5 );
    ReefAngel.Wavemaker2( Port6 );
    ReefAngel.DosingPumpRepeat1( Port7 );
    ReefAngel.StandardFan( Port8 );
    ReefAngel.PWM.DaylightPWMSlope();
    ReefAngel.PWM.ActinicPWMSlope();
    
    // Calculate your regular sunrise/sunset PWM value
    ActinicPWMValue=PWMSlope(12,15,22,45,15,100,60,ActinicPWMValue);
    DaylightPWMValue=PWMSlope(13,0,22,0,15,100,60,DaylightPWMValue);
    CheckCloud();
    ReefAngel.PWM.SetActinic(ActinicPWMValue);
    ReefAngel.PWM.SetDaylight(DaylightPWMValue);

    ////// Place your custom code above here

    // This should always be the last line
    ReefAngel.Portal( "jegillis" );
    ReefAngel.ShowInterface();
}
//*********************************************************************************************************************************
// Random Cloud/Thunderstorm effects function
void CheckCloud()
{

  // ------------------------------------------------------------
  // Change the values below to customize your cloud/storm effect

  // Frequency in days based on the day of the month - number 2 means every 2 days, for example (day 2,4,6 etc)
  // For testing purposes, you can use 1 and cause the cloud to occur everyday
#define Clouds_Every_X_Days 1 

  // Percentage chance of a cloud happening today
  // For testing purposes, you can use 100 and cause the cloud to have 100% chance of happening
#define Cloud_Chance_per_Day 100

  // Minimum number of minutes for cloud duration.  Don't use max duration of less than 6
#define Min_Cloud_Duration 7

  // Maximum number of minutes for the cloud duration. Don't use max duration of more than 255
#define Max_Cloud_Duration 15

  // Minimum number of clouds that can happen per day
#define Min_Clouds_per_Day 3

  // Maximum number of clouds that can happen per day
#define Max_Clouds_per_Day 5

  // Only start the cloud effect after this setting
  // In this example, start could after 11:30am
#define Start_Cloud_After NumMins(15,00)

  // Always end the cloud effect before this setting
  // In this example, end could before 8:00pm
#define End_Cloud_Before NumMins(22,00)

  // Percentage chance of a lightning happen for every cloud
  // For testing purposes, you can use 100 and cause the lightning to have 100% chance of happening
#define Lightning_Change_per_Cloud 100

  // Note: Make sure to choose correct values that will work within your PWMSLope settings.
  // For example, in our case, we could have a max of 5 clouds per day and they could last for 50 minutes.
  // Which could mean 250 minutes of clouds. We need to make sure the PWMSlope can accomodate 250 minutes of effects or unforseen resul could happen.
    // Also, make sure that you can fit double those minutes between Start_Cloud_After and End_Cloud_Before.
  // In our example, we have 510 minutes between Start_Cloud_After and End_Cloud_Before, so double the 250 minutes (or 500 minutes) can fit in that 510 minutes window.
    // It's a tight fit, but it did.

  //#define printdebug // Uncomment this for debug print on Serial Monitor window
  #define forcecloudcalculation // Uncomment this to force the cloud calculation to happen in the boot process. 


  // Change the values above to customize your cloud/storm effect
  // ------------------------------------------------------------
  // Do not change anything below here

  static byte cloudchance=255;
  static byte cloudduration=0;
  static int cloudstart=0;
  static byte numclouds=0;
  static byte lightningchance=0;
  static byte cloudindex=0;
  static byte lightningstatus=0;
  static int LastNumMins=0;
  // Every day at midnight, we check for chance of cloud happening today
  if (hour()==0 && minute()==0 && second()==0) cloudchance=255;

#ifdef forcecloudcalculation
    if (cloudchance==255)
#else
    if (hour()==0 && minute()==0 && second()==1 && cloudchance==255) 
#endif
    {
      //Pick a random number between 0 and 99
      cloudchance=random(100); 
      // if picked number is greater than Cloud_Chance_per_Day, we will not have clouds today
      if (cloudchance>Cloud_Chance_per_Day) cloudchance=0;
      // Check if today is day for clouds. 
      if ((day()%Clouds_Every_X_Days)!=0) cloudchance=0; 
      // If we have cloud today
      if (cloudchance)
      {
        // pick a random number for number of clouds between Min_Clouds_per_Day and Max_Clouds_per_Day
        numclouds=random(Min_Clouds_per_Day,Max_Clouds_per_Day);
        // pick the time that the first cloud will start
        // the range is calculated between Start_Cloud_After and the even distribuition of clouds on this day. 
        cloudstart=random(Start_Cloud_After,Start_Cloud_After+((End_Cloud_Before-Start_Cloud_After)/(numclouds*2)));
        // pick a random number for the cloud duration of first cloud.
        cloudduration=random(Min_Cloud_Duration,Max_Cloud_Duration);
        //Pick a random number between 0 and 99
        lightningchance=random(100);
        // if picked number is greater than Lightning_Change_per_Cloud, we will not have lightning today
        if (lightningchance>Lightning_Change_per_Cloud) lightningchance=0;
      }
    }
  // Now that we have all the parameters for the cloud, let's create the effect

  if (cloudchance)
  {
    //is it time for cloud yet?
    if (NumMins(hour(),minute())>=cloudstart && NumMins(hour(),minute())<(cloudstart+cloudduration))
    {
      DaylightPWMValue=ReversePWMSlope(cloudstart,cloudstart+cloudduration,DaylightPWMValue,15,180);
      if (lightningchance && (NumMins(hour(),minute())==(cloudstart+(cloudduration/2))) && second()<5)
      {
        if (random(100)<20) lightningstatus=1; 
        else lightningstatus=0;
        if (lightningstatus)
        {
          DaylightPWMValue=100; 
          ActinicPWMValue=100;
        }
        else 
        {
          DaylightPWMValue=0;
          ActinicPWMValue=15;
        }
        delay(1);
      }
    }
    if (NumMins(hour(),minute())>(cloudstart+cloudduration))
    {
      cloudindex++;
      if (cloudindex < numclouds)
      {
        cloudstart=random(Start_Cloud_After+(((End_Cloud_Before-Start_Cloud_After)/(numclouds*2))*cloudindex*2),(Start_Cloud_After+(((End_Cloud_Before-Start_Cloud_After)/(numclouds*2))*cloudindex*2))+((End_Cloud_Before-Start_Cloud_After)/(numclouds*2)));
        // pick a random number for the cloud duration of first cloud.
        cloudduration=random(Min_Cloud_Duration,Max_Cloud_Duration);
        //Pick a random number between 0 and 99
        lightningchance=random(100);
        // if picked number is greater than Lightning_Change_per_Cloud, we will not have lightning today
        if (lightningchance>Lightning_Change_per_Cloud) lightningchance=0;
      }
    }
  }
  
  if (LastNumMins!=NumMins(hour(),minute()))
  {
    LastNumMins=NumMins(hour(),minute());
    ReefAngel.LCD.Clear(255,0,120,132,132);
    ReefAngel.LCD.DrawText(0,255,8,108,"Cloud");
    ReefAngel.LCD.DrawText(0,255,8,118,"00:00");
    ReefAngel.LCD.DrawText(0,255,90,108,"Storm");
    ReefAngel.LCD.DrawText(0,255,48,108,"Length");
    ReefAngel.LCD.DrawText(0,255,90,118,"00:00");
    if (cloudchance && (NumMins(hour(),minute())<cloudstart))
    {
      int x=0;
      if ((cloudstart/60)>=10) x=8; else x=14;
      ReefAngel.LCD.DrawText(37,255,x,118,(cloudstart/60));
      if ((cloudstart%60)>=10) x=58; else x=64;
      ReefAngel.LCD.DrawText(37,255,x,118,(cloudstart%60));
    }
    if (lightningchance) 
    {
      int x=0;
      if (((cloudstart+(cloudduration/2))/60)>=10) x=90; else x=96;
      ReefAngel.LCD.DrawText(37,255,x,118,((cloudstart+(cloudduration/2))/60));
      if (((cloudstart+(cloudduration/2))%60)>=10) x=108; else x=114;
      ReefAngel.LCD.DrawText(37,255,x,118,((cloudstart+(cloudduration/2))%60));
    }
  }   
}

byte ReversePWMSlope(long cstart,long cend,byte PWMStart,byte PWMEnd, byte clength)
{
  long n=elapsedSecsToday(now());
  cstart*=60;
  cend*=60;
  if (n<cstart) return PWMStart;
  if (n>=cstart && n<=(cstart+clength)) return map(n,cstart,cstart+clength,PWMStart,PWMEnd);
  if (n>(cstart+clength) && n<(cend-clength)) return PWMEnd;
  if (n>=(cend-clength) && n<=cend) return map(n,cend-clength,cend,PWMEnd,PWMStart);
  if (n>cend) return PWMStart;
}
Image
User avatar
lnevo
Posts: 5430
Joined: Fri Jul 20, 2012 9:42 am

Re: Custom Main Screens

Post by lnevo »

I know someone did some code to base their temp color off the value, but I can't find it at the moment.

I did help add a function to the library so that if you go over a certain limit it will flash. Take a look at this thread:

http://forum.reefangel.com/viewtopic.ph ... nitoralarm

Oh and here is the post in this thread where someone changed the temp colors to be based on range

http://forum.reefangel.com/viewtopic.php?p=23651#p23651
jegillis
Posts: 86
Joined: Sat Jan 04, 2014 10:26 am

Re: Custom Main Screens

Post by jegillis »

Thanks, I used the color change the flashing is cool but I had no idea what I was looking at on that code
Image
User avatar
jsclownfish
Posts: 378
Joined: Mon Oct 24, 2011 7:52 pm
Location: Saint Louis

Re: Custom Main Screens

Post by jsclownfish »

Here is the code I used. I don't know if it ever went into the libraries...

Code: Select all

//function to flash warning (parameter, high limt, low limit, x, y, decimal)
void Warningflash(int param, int high, int low, byte x, byte y, byte z)
{
  int mod=second()%2;
  if (param > high || param < low) 
 {
     if (mod==0) ReefAngel.LCD.Clear(DefaultBGColor,x,y,x+40,y+10);
     else ReefAngel.LCD.DrawSingleMonitor(param, COLOR_RED, x, y, z);
 }
 else ReefAngel.LCD.DrawSingleMonitor(param, DefaultFGColor, x, y, z);
}
User avatar
lnevo
Posts: 5430
Joined: Fri Jul 20, 2012 9:42 am

Re: Custom Main Screens

Post by lnevo »

Yes, I added it :) I think Roberto took the pull request...
SEANTADEZ
Posts: 16
Joined: Tue Feb 25, 2014 8:38 pm
Contact:

Re: Custom Main Screens

Post by SEANTADEZ »

SuperDodge wrote:Image

Here's where my screen seems to have settled at during my first week of tinkering with my Reef Angel.

The line that says "Lagoon" will eventually update with my Vortech status (when I save some coin for the RF adapter. The line is always centered

The line that says "Clear Skies" will update to say "Cloudy(XX:XX)" or "Storms(XX:XX)" if there is a cloud or a cloud with lightning coming. This line is always centered.

The moon status updates throughout the month and is always centered.

The line that says W:100% B:100% R:100% updates in real-time to reflect all three channels on my AI Nano fixture. The line is always centered as the position of the numbers changes depending on the number of digits.

THANKS TO EVERYONE WHO PROVIDED GREAT CODE AND IDEAS THROUGHOUT THIS THREAD!

CODE REMOVED BECAUSE I FOUND AN ERROR - WILL REPOST WHEN FIXED
Really Cool design but, i can't find where did you post the code...
SEANTADEZ
Posts: 16
Joined: Tue Feb 25, 2014 8:38 pm
Contact:

Re: Custom Main Screens

Post by SEANTADEZ »

Can anybody help me with this code? I don't know what's wrong but i can't get the DrawHugeNumbers working, i don't get any error just no highlight and obviously doesn't work, also i have like a flashing display, very anoint...




//CUSTOM SCREEM

void DrawCustomMain()
{
byte x = 6;
byte y = 2;
byte t;
ReefAngel.LCD.DrawLargeText(COLOR_ORANGE, COLOR_WHITE, 6, 5, " SEANTADEZ");
ReefAngel.LCD.DrawDate(6, 118);
ReefAngel.LCD.Clear(COLOR_BLACK, 1, 17, 132, 17);
pingSerial();
x = 12;
y += MENU_START_ROW+1;
ReefAngel.LCD.DrawText(COLOR_DARKTURQUOISE, COLOR_WHITE, x, y+6, "TEMP. PH");
char text[7];
ConvertNumToString(text, ReefAngel.Params.PH, 100);
ReefAngel.LCD.Clear(DefaultBGColor, x+16, y+65, x+65, y+16);
ReefAngel.LCD.DrawLargeText(PHColor, DefaultBGColor, x+75, y+18, text);
pingSerial();

ConvertNumToString(text, ReefAngel.Params.Temp[T1_PROBE], 10);
y += MENU_START_ROW*2;
x = 10;
ReefAngel.LCD.Clear(DefaultBGColor,x,y,x+(16*4),y+16);
pingSerial();
ReefAngel.LCD.DrawHugeNumbers(T1TempColor, DefaultBGColor, x, y, text);
pingSerial();
x += (16*4) + 8;
ReefAngel.LCD.DrawText(COLOR_DARKTURQUOISE,DefaultBGColor,8,y+25,"Room:");
ReefAngel.LCD.DrawSingleMonitor(ReefAngel.Params.Temp[T2_PROBE], COLOR_BLUE,
9, y+35, 10);

//*** Doser's Status ***********
boolean Dose1On = ReefAngel.Relay.Status(Port1);
boolean Dose2On = ReefAngel.Relay.Status(Port2);
//*** End Doser Status ********

// ***** START DOSING IF IS CALCIUM THEN....

if (Dose1On)
{
ReefAngel.LCD.DrawText(COLOR_DARKTURQUOISE,DefaultBGColor,58,y+25," Adding:");
ReefAngel.LCD.DrawText(COLOR_GREEN, DefaultBGColor, 58,y+35, " CALC. ");
}

// ****** **** START DOSING IF IS ALK THEN....
if (Dose2On)
{
ReefAngel.LCD.DrawText(COLOR_DARKTURQUOISE,DefaultBGColor,58,y+25," Adding:");
ReefAngel.LCD.DrawText(COLOR_RED, DefaultBGColor, 58,y+35, "ALK");
}
else
{
ReefAngel.LCD.DrawText(COLOR_DARKTURQUOISE,DefaultBGColor,58,y+25," Adding:");
ReefAngel.LCD.DrawText(COLOR_BLUE, DefaultBGColor, 58,y+35, "Nothing");
}


//**** end doser status ********


byte TempRelay = ReefAngel.Relay.RelayData;
TempRelay &= ReefAngel.Relay.RelayMaskOff;
TempRelay |= ReefAngel.Relay.RelayMaskOn;
ReefAngel.LCD.DrawOutletBox(12, 93, TempRelay);

}

void DrawCustomGraph()
{
}

//End
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: Custom Main Screens

Post by rimai »

The huge numbers are showing just fine.
What do you mean with can't get it working?
The flashing is because you are erasing and painting something over in the same spot.
It flashes because you erase white and paint red, so the white and red causes it to look like it's flashing.
You just have to be careful with painting and erasing. When in doubt, it is easier to erase in a different color other than white to clearly see where you are erasing. I usually use red or green and then I change to white when I'm satisfied with the positioning of what I'm erasing.
This is the line that is doing that:

Code: Select all

ReefAngel.LCD.Clear(DefaultBGColor, x+16, y+65, x+65, y+16);
Roberto.
SEANTADEZ
Posts: 16
Joined: Tue Feb 25, 2014 8:38 pm
Contact:

Re: Custom Main Screens

Post by SEANTADEZ »

Great i figured it out it's working great for the last few days. thanks a lot. I'm learning
GugsJr
Posts: 68
Joined: Fri Jun 20, 2014 6:30 am

Re: Custom Main Screens

Post by GugsJr »

Got my tank going and started diving in further into my Reef Angel.

Here is what Display looks like, I modified reefer's code. I added the center channel and added code to display the offset speed of the antisync pump
MyRADisplay.jpg
MyRADisplay.jpg (111.28 KiB) Viewed 10390 times

Code: Select all

//Custom Main, Graph & Menu

static unsigned long PumpSpeed = InternalMemory.DCPumpSpeed_read(); //Sets Value to pump speed
static int PumpOffset = (PumpSpeed*1.10); //Change Value to match AntiSyncOffset value

void DrawCustomMain() {
  byte x = 6;
  byte y = 2;
  byte t;
  char text[7];

 ReefAngel.LCD.DrawLargeText(COLOR_BLACK,COLOR_WHITE, 6, 2, " GugsJr's Reef");
 ReefAngel.LCD.DrawDate(6, 118);
 ReefAngel.LCD.Clear(COLOR_BLACK, 1, 17, 132, 17);
 pingSerial();

  ReefAngel.LCD.DrawLargeText(COLOR_BLUE,COLOR_WHITE, 24,16,"Jebao Mode:");
       if  (now()%SECS_PER_DAY<52200|| now()%SECS_PER_DAY >=1800) ReefAngel.LCD.DrawLargeText(COLOR_MAGENTA,255,28,26,"Night Mode");
  else if  (InternalMemory.DCPumpMode_read()==Lagoon) ReefAngel.LCD.DrawLargeText(COLOR_MAGENTA,255,42,26,"Lagoon");
  else if  (InternalMemory.DCPumpMode_read()==ReefCrest) ReefAngel.LCD.DrawLargeText(COLOR_MAGENTA,255,25,26,"Reef Crest");
  else if  (InternalMemory.DCPumpMode_read()==ShortPulse) ReefAngel.LCD.DrawLargeText(COLOR_MAGENTA,255,22,26,"Short Pulse");
  else if  (InternalMemory.DCPumpMode_read()==LongPulse) ReefAngel.LCD.DrawLargeText(COLOR_MAGENTA,255,25,26,"Long Pulse");
  else if  (InternalMemory.DCPumpMode_read()==NutrientTransport) ReefAngel.LCD.DrawLargeText(COLOR_MAGENTA,255,8,26,"Nutrient Trnsp.");
  else if  (InternalMemory.DCPumpMode_read()==TidalSwell) ReefAngel.LCD.DrawLargeText(COLOR_MAGENTA,255,23,26,"Tidal Swell");
  else if  (InternalMemory.DCPumpMode_read()==Custom) ReefAngel.LCD.DrawLargeText(COLOR_MAGENTA,255,23,26,"Custom");
  else if  (InternalMemory.DCPumpMode_read()==Else) ReefAngel.LCD.DrawLargeText(COLOR_MAGENTA,255,23,26,"Tidal Else");
  else if  (InternalMemory.DCPumpMode_read()==Sine) ReefAngel.LCD.DrawLargeText(COLOR_MAGENTA,255,23,26,"Sine");
  else if  (InternalMemory.DCPumpMode_read()==Gyre) ReefAngel.LCD.DrawLargeText(COLOR_MAGENTA,255,23,26,"Gyre");
  else if  (InternalMemory.DCPumpMode_read()== Constant) ReefAngel.LCD.DrawLargeText(COLOR_MAGENTA,255,35,27,"Constant");

  ReefAngel.LCD.DrawLargeText(0,255,17,36,"Display");
  ReefAngel.LCD.DrawLargeText(0,255,17,49,"Temp");
  ConvertNumToString(text, ReefAngel.Params.Temp[T1_PROBE], 10);
  ReefAngel.LCD.DrawHugeText(COLOR_RED, 255, 12, 65, text, Num12x16);
  pingSerial();

  ReefAngel.LCD.DrawLargeText(0,255,100,45,"pH");
  ConvertNumToString(text, ReefAngel.Params.PH, 100);
  ReefAngel.LCD.DrawLargeText(COLOR_BLUE, 255, 89, 65, text, Num8x8);
  pingSerial();
  
  ReefAngel.LCD.DrawText(COLOR_CORNFLOWERBLUE,255,5,80, "Jebao");
  ReefAngel.LCD.DrawText(COLOR_CORNFLOWERBLUE,255,10,89, "Left"); 
  ReefAngel.LCD.DrawText(COLOR_BLACK,255,16,100, InternalMemory.DCPumpSpeed_read());
  ReefAngel.LCD.DrawText(COLOR_CORNFLOWERBLUE,255,50,80, "Jebao");
  ReefAngel.LCD.DrawText(COLOR_CORNFLOWERBLUE,255,49,89, "Center"); 
  ReefAngel.LCD.DrawText(COLOR_BLACK,255,59,100, PumpOffset);
  ReefAngel.LCD.DrawText(COLOR_CORNFLOWERBLUE,255,93,80, "Jebao");
  ReefAngel.LCD.DrawText(COLOR_CORNFLOWERBLUE,255,88,89, " Right"); 
  ReefAngel.LCD.DrawText(COLOR_BLACK,255,100,100, InternalMemory.DCPumpSpeed_read());

  pingSerial();
 
  
  
}
void DrawCustomGraph()
{
}
binder
Posts: 2871
Joined: Fri Mar 18, 2011 6:20 pm
Location: Illinois
Contact:

Re: Custom Main Screens

Post by binder »

Since I am redoing my 75g saltwater tank and making upgrades, I decided my controller's main screen needed an "update". So, I worked out a new custom screen and figured I would share with everybody.
I have a maxspect gyre xf230 that is controlled via the Daylight port. I have a specific mode that I run it at during the "night" hours. I have created a specific set of internal memory locations just for the night modes.
curt custom main screen
curt custom main screen
curt_custom_main.jpg (49.89 KiB) Viewed 10282 times
___TEST CODE___ at the top is changed to the current date and time when it's running normally.
I have T2 and T3 set to only display when the probes are connected.
I have the Water Level Expansion and Salinity Expansion on my tank, so those values are included.
Water is the water level attachment that I have for my reservoir tank.
The screenshot is a test screen. I have hard coded values when I enabled the test mode that way I can get a better idea of how the screen layout is.
I took the bar graph code from the "2014 home screen" in the libraries and shrunk it down to half the size, so I can squeeze it in smaller spaces.
The word "Constant" is the current mode the DC Pump is running in and the bar with number is the speed of the pump on the Daylight channel.
I'm using the standard outlet box but have thought about switching over to the horizontal circle outlet box. I haven't looked at the circle outlets for a long time, so I'm not sure if I will do it or not.
Anyways, here's the FULL code that I'm running. I'm including my FULL code since I had to create extra functions to get what I wanted done.

Code: Select all

// RA+ for 75 Gallon tank
//
// Updated:  6/18/2017
//
// Expansion Modules Added:
//   Expansion Hub
//   Salinity
//   Water Level
//
// Features:
//   T1 - Tank Temperature probe
//   T2 - Room Temperature probe
//   AP - N/A
//   DP - Gyre XF230
//   Water Level - Water Level of reservoir
//   PH - probe in sump
//   Salinity - probe in sump
//
//
// Ports:
//   1 - Skimmer
//   2 - WM Left
//   3 - Heater
//   4 - Return
//   5 - Maxspect Gyre XF230
//   6 - PhosBan 150 Reactor
//   7 - Hydra 26 HD Power Supply
//   8 - Hydra 26 HD Power Supply
//
//

#include <ReefAngel_Features.h>
#include <Globals.h>
#include <RA_Wifi.h>
#include <Wire.h>
#include <OneWire.h>
#include <Time.h>
#include <DS1307RTC.h>
#include <InternalEEPROM.h>
#include <RA_NokiaLCD.h>
#include <RA_ATO.h>
#include <RA_Joystick.h>
#include <LED.h>
#include <RA_TempSensor.h>
#include <Relay.h>
#include <RA_PWM.h>
#include <Timer.h>
#include <Memory.h>
#include <Salinity.h>
#include <WaterLevel.h>
#include <DCPump.h>
#include <ReefAngel.h>

// Global variables
// used for test controller
//#define __TEST__
// starting point for left edge of screen
#define LEFT_EDGE 8
// DC Pump mode text strings
String PUMP_MODES[] = {"Constant","Lagoon","ReefCrest","Short Pulse","Long Pulse","Nutrient",
                       "Tidal Swell","Feeding","","Night","","Custom","Else","Sine","Gyre"};
// graphics for the water level bar
const unsigned PROGMEM char BAR_CENTER[] = {0x92, 0x92, 0xFF, 0xFF, 0xFF, 0xFF, 0xDB, 0xDB, 0xB6, 0xB6, 0xB6, 0xB6};
const unsigned PROGMEM char BAR_WL_LEFT[] = {0x29, 0x29, 0x2A, 0x72, 0x72, 0x96};
const unsigned PROGMEM char BAR_WL_RIGHT[] = {0x6E, 0x92, 0x96, 0xDB, 0xDB, 0xDB};
const unsigned PROGMEM char BAR_DP_LEFT[] = {0xAB, 0xAB, 0xAF, 0xD3, 0xD7, 0xFB};
const unsigned PROGMEM char BAR_DP_RIGHT[] = {0xB7, 0xB7, 0xB7, 0xDB, 0xDB, 0xDB};

// Memory Locaitons
#define CURT_MEMORY              50
#define DCPUMP_NIGHT_MODE        CURT_MEMORY
#define DCPUMP_NIGHT_SPEED       DCPUMP_NIGHT_MODE + 1
#define DCPUMP_NIGHT_DURATION    DCPUMP_NIGHT_MODE + 2
#define DCPUMP_NIGHT_THRESHOLD   DCPUMP_NIGHT_MODE + 3

// Custom functions
boolean isNightTime();
void checkCustomMemoryValues();
uint8_t DCPumpNightMode_read();
uint8_t DCPumpNightSpeed_read();
uint8_t DCPumpNightDuration_read();
uint8_t DCPumpNightThreshold_read();
uint8_t CustomRead(int address);
void CustomWrite(int address, const uint8_t value);

void setup()
{
    ReefAngel.Init();  //Initialize controller
    checkCustomMemoryValues();
    ReefAngel.AddWifi();
    ReefAngel.AddStandardMenu();
    ReefAngel.AddSalinityExpansion();

    // Default Salinity compensation
    ReefAngel.Salinity.SetCompensation(0);

    ReefAngel.WaterChangePorts = Port4Bit;
    ReefAngel.OverheatShutoffPorts = Port3Bit | Port7Bit | Port8Bit;
    ReefAngel.OverheatProbe = T1_PROBE;

    // Feeding and water change mode speeds
    ReefAngel.DCPump.FeedingSpeed = 0;
    ReefAngel.DCPump.WaterChangeSpeed = 0;

    // Ports that are always on
    ReefAngel.Relay.On(Port1);  // Skimmer
    ReefAngel.Relay.On(Port4);  // Return
    ReefAngel.Relay.On(Port5);  // Gyre XF230
    ReefAngel.Relay.On(Port6);  // PhosBan Reactor
    ReefAngel.Relay.On(Port7);  // Hydra 26 HD
    ReefAngel.Relay.On(Port8);  // Hydra 26 HD

    // Ports that are not in use
    ReefAngel.Relay.Off(Port2);
}

void loop()
{
    ReefAngel.StandardHeater(Port3);

    ReefAngel.DCPump.DaylightChannel = Sync;

    /*
    Night mode - use alternate memory locations
    Day mode - default memory locations
    */
    if ( isNightTime() ) {
        // force in either Constant mode or Long Pulse mode
        // use the nighttime memory locations
        ReefAngel.DCPump.UseMemory = false;
        ReefAngel.DCPump.Mode = DCPumpNightMode_read();
        ReefAngel.DCPump.Speed = DCPumpNightSpeed_read();
        ReefAngel.DCPump.Duration = DCPumpNightDuration_read();
        ReefAngel.DCPump.Threshold = DCPumpNightThreshold_read();
    } else {
        // use default memory values for the modes
        ReefAngel.DCPump.UseMemory = true;
    }

    ReefAngel.ShowInterface();
}

#define LINE1   19
#define LINE2   47
#define LINE3   70
#define WL_BAR_OFFSET 41
#define DC_BAR_OFFSET 4
void DrawCustomMain()
{
    // Fonts in use:   NUMBERS_16x16, FONT_8x16
    byte x = 6;
    byte y = 3;
    byte t;
    char text[11];
    boolean fNight = isNightTime();

#ifdef __TEST__
    ReefAngel.LCD.DrawText(COLOR_RED, DefaultBGColor, x, y, "_____TEST CODE_____");
#else
    // Date & time
    ReefAngel.LCD.DrawDate(x, y);
#endif  // __TEST__

    // Divider line
    ReefAngel.LCD.Clear(COLOR_BLACK, 1, 11, 128, 11);

    // Draw T1
    ConvertNumToString(text, ReefAngel.Params.Temp[T1_PROBE], 10);
    x = 8;
    y = LINE1;  // 19
    // NOTE huge numbers are 16x16 (width x height)
    ReefAngel.LCD.Clear(DefaultBGColor, x, y, x+64, y+16);
    ReefAngel.LCD.DrawHugeNumbers(T1TempColor, DefaultBGColor, x, y, text);

    // Draw T2
    // NOTE 4 digits for T1 (16 width, 16*4 pixels)
    x = 80;
#ifdef __TEST__
    ReefAngel.Params.Temp[T2_PROBE] = 810;
#endif  // __TEST__
    if(ReefAngel.Params.Temp[T2_PROBE] > 0) {
        ReefAngel.LCD.DrawText(T2TempColor, DefaultBGColor, x, y, "T2:");
        // NOTE "T2:" is 3 chars of 5 pixels each (15 pixels), plus 2 pixels space after, start on 3rd pixel
        ReefAngel.LCD.DrawSingleMonitor(ReefAngel.Params.Temp[T2_PROBE], T2TempColor, x+18, y, 10);
    } else {
        // No, T2, clear the entire space for it
        ReefAngel.LCD.Clear(DefaultBGColor, x, y, x+38, y+8);
    }

    // Draw T3 if present
    y = 29;
#ifdef __TEST__
    ReefAngel.Params.Temp[T3_PROBE] = 796;
#endif  // __TEST__
    if(ReefAngel.Params.Temp[T3_PROBE] > 0) {
        ReefAngel.LCD.DrawText(T3TempColor, DefaultBGColor, x, y, "T3:");
        // NOTE "T3:" is 3 chars of 5 pixels each (15 pixels), plus 2 pixels space after, start on 3rd pixel
        ReefAngel.LCD.DrawSingleMonitor(ReefAngel.Params.Temp[T3_PROBE], T3TempColor, x+18, y, 10);
    } else {
        // No, T3, clear the entire space for it
        ReefAngel.LCD.Clear(DefaultBGColor, x, y, x+38, y+8);
    }

    // Draw PH
    y = LINE2;
#ifdef __TEST__
    strcpy(text, "8.20");
#else
    ConvertNumToString(text, ReefAngel.Params.PH, 100);
#endif // __TEST__
    // NOTE ph max is X.XX, 4 digits
    ReefAngel.LCD.DrawLargeText(PHColor, DefaultBGColor, 3, y, "pH:", Font8x16);
    x = 29;
    // TODO confirm width to clear
    ReefAngel.LCD.Clear(DefaultBGColor, x, y, x+32, y+16);
    ReefAngel.LCD.DrawLargeText(PHColor, DefaultBGColor, x, y, text, Font8x16);

    // Draw Salinity
#ifdef __TEST__
    strcpy(text, "35.0");
#else
    ConvertNumToString(text, ReefAngel.Params.Salinity, 10);
#endif // __TEST__
    // NOTE Salinity max is XX.X, 4 digits
    x = 69;
    // TODO confirm width to clear
    ReefAngel.LCD.Clear(DefaultBGColor, x, y, x+32, y+16);
    ReefAngel.LCD.DrawLargeText(COLOR_CRIMSON, DefaultBGColor, x, y, text, Font8x16);
    ReefAngel.LCD.DrawLargeText(COLOR_CRIMSON, DefaultBGColor, 102, y, "ppt", Font8x16);

    pingSerial();

    // Draw Water Level Box (used code from libraries)
    y = LINE3;
    // TODO determine color to use for WATER level (COLOR_ROYALBLUE)
    ReefAngel.LCD.DrawText(COLOR_ROYALBLUE, DefaultBGColor, 8, y, "Water");
#ifdef __TEST__
    t = 79;
#else
    t = ReefAngel.WaterLevel.GetLevel(0);
#endif  // __TEST__
    // sanity check, ensure level isn't greater than 100
    if(t > 100) {
        t = 100;
    }
    x = 99;
    // draw value to the right of the bar
    ReefAngel.LCD.DrawText(COLOR_ROYALBLUE, DefaultBGColor, 99, y, "    ");
    sprintf(text, "%d%%", t);
    ReefAngel.LCD.DrawText(COLOR_ROYALBLUE, DefaultBGColor, 99, y, text);
    // Water level is truncated to 50 pixels instead of 100
    // Every 2% equals 1 pixel
    // divide water level by 2
    t = t / 2;
    byte b;
    // draw the image to the left of the center line, filled bar background
    for(b = 0; b < t; b++)
    {
        // swidth,sheight, X, Y, img
        ReefAngel.LCD.DrawImage(1, 6, b + WL_BAR_OFFSET, y + 2, BAR_WL_LEFT);
    }
    // draw the center image, indicator
    ReefAngel.LCD.DrawImage(2, 6, t + WL_BAR_OFFSET, y + 2, BAR_CENTER);
    // draw the image to the right of the center line, unfilled bar background
    for(b = t; b < 50; b++)
    {
        ReefAngel.LCD.DrawImage(1, 6, b + WL_BAR_OFFSET + 2, y + 2, BAR_WL_RIGHT);
    }

    // Draw DC Pump Mode (next line)
    y = 88;
    x = 4;
    if (fNight) {
      t = DCPumpNightMode_read();
    } else {
      t = InternalMemory.DCPumpMode_read();
    }
    // copy the string from the global array into a buffer of 11 chars for display on screen
    PUMP_MODES[t].toCharArray(text, 11);
    // NOTE text is max of 11 chars, 11*5=55 pixels
    ReefAngel.LCD.Clear(DefaultBGColor, x, y, x+55, y+8);
    ReefAngel.LCD.DrawText(COLOR_BLACK, DefaultBGColor, x, y, text);

    // Draw Day/Night schedule (same line as pump mode)
    // NOTE Center text in available space between column 72 and 128
    if (fNight) {
      strcpy(text, "Night");
      b = COLOR_BLACK;
      t = COLOR_WHITE;
      x = 82;
    } else {
      strcpy(text, "Day");
      b = DefaultBGColor;
      t = COLOR_BLACK;
      x = 90;
    }
    // clear entire space with the background color
    // clear bigger space than just for the text to line up
    // the bottom of the square with the dc pump speed bar
    ReefAngel.LCD.Clear(b, 74, y, 128, y+18);
    ReefAngel.LCD.DrawLargeText(t, b, x, y+1, text, Font8x16);

    // Draw DC Pump Speed bar
    y = 98;
    x = 58;
#ifdef __TEST__
    t = 65;
#else
    t = ReefAngel.PWM.GetDaylightValue();
#endif  // __TEST__
    ReefAngel.LCD.Clear(DefaultBGColor, x, y, x+15, y+8);
    ReefAngel.LCD.DrawText(COLOR_BLACK, DefaultBGColor, x, y, t);
    // scale bar to be half width, divide value by 2
    t = t / 2;
    for(b = 0; b < t; b++)
    {
        ReefAngel.LCD.DrawImage(1, 6, b + DC_BAR_OFFSET, y + 2, BAR_DP_LEFT);
    }
    ReefAngel.LCD.DrawImage(2, 6, t + DC_BAR_OFFSET, y + 2, BAR_CENTER);
    for(b = t; b < 50; b++)
    {
        ReefAngel.LCD.DrawImage(1, 6, b + DC_BAR_OFFSET + 2, y + 2, BAR_DP_RIGHT);
    }

    // Draw outlet bar
    t = ReefAngel.Relay.RelayData;
    t &= ReefAngel.Relay.RelayMaskOff;
    t |= ReefAngel.Relay.RelayMaskOn;
    ReefAngel.LCD.DrawOutletBox(12, 112, t);

    pingSerial();
}

void DrawCustomGraph()
{
}

boolean isNightTime()
{
    boolean fResult = false;
    byte bOffHour = InternalMemory.StdLightsOffHour_read();
    byte bOffMinute = InternalMemory.StdLightsOffMinute_read();
    byte bOnHour = InternalMemory.StdLightsOnHour_read();
    byte bOnMinute = InternalMemory.StdLightsOnMinute_read();

    /*
    If current hour is off hour and current minute is equal or after off minute, night time is true
    if current hour is after off hour, night time is true
    (beyond midnight, aka early hours in morning, overnight wrap)
    if current hour is before on hour, night time is true
    if current hour is on hour and current minute is before off minute, night time is true
    */
    if ( ((hour() == bOffHour) && (minute() >= bOffMinute)) ||
         (hour() > bOffHour) ||
         (hour() < bOnHour) ||
         ((hour() == bOnHour) && (minute() < bOnMinute)) )
    {
        fResult = true;
    }

    return fResult;
}

void checkCustomMemoryValues()
{
    if ( DCPumpNightMode_read() > 14 )
    {
        // Default to Constant Mode
        CustomWrite(DCPUMP_NIGHT_MODE, 0);
    }
    if ( DCPumpNightSpeed_read() > 100 )
    {
        // Default to 0 speed
        CustomWrite(DCPUMP_NIGHT_SPEED, 0);
    }
    if ( DCPumpNightDuration_read() > 100 )
    {
        // Default to 0 duration
        CustomWrite(DCPUMP_NIGHT_DURATION, 0);
    }
    if ( DCPumpNightThreshold_read() > 100 )
    {
        // Default to 30 threshold
        CustomWrite(DCPUMP_NIGHT_THRESHOLD, 30);
    }
}

uint8_t DCPumpNightMode_read()
{
    return CustomRead(DCPUMP_NIGHT_MODE);
}

uint8_t DCPumpNightSpeed_read()
{
    return CustomRead(DCPUMP_NIGHT_SPEED);
}

uint8_t DCPumpNightDuration_read()
{
    return CustomRead(DCPUMP_NIGHT_DURATION);
}

uint8_t DCPumpNightThreshold_read()
{
    return CustomRead(DCPUMP_NIGHT_THRESHOLD);
}

uint8_t CustomRead(int address)
{
#if not defined __SAM3X8E__
    return eeprom_read_byte((unsigned char *) address);
#else
    return SPIEEPROM.Read(address);
#endif
}

void CustomWrite(int address, const uint8_t value)
{
    if (CustomRead(address) != value )
    {
#if not defined __SAM3X8E__
        eeprom_write_byte((unsigned char *) address, value);
#else
        SPIEEPROM.Write(address, value);
#endif
    }
}
Enjoy! :-)
Post Reply