Jebao Cables

Expansion modules and attachments
Post Reply
psirex
Posts: 16
Joined: Tue Jun 11, 2013 8:44 am

Jebao Cables

Post by psirex »

When the cables are in place and power plugged in the units do not turn on. when connected to original wiring they work just fine. Also the arrows on the RA Jebao cable does not line up with the one one the unit wiring.....
rimai
Posts: 12857
Joined: Fri Mar 18, 2011 6:47 pm

Re: Jebao Cables

Post by rimai »

Did you upload a code that controls the pumps?
Can you post your code?
Also, can you please elaborate what you mean with not lining up?
Roberto.
psirex
Posts: 16
Joined: Tue Jun 11, 2013 8:44 am

Re: Jebao Cables

Post by psirex »

The original Jebao cable have arrows on them as to help with alignment\proper connection to the pump(s). The cable I got from RA has the arrows as well but when connecting to the pumps the arrows don't align with each other; have to rotate the wiring so the notches line up. If not then I would be forcing the connection.

Here is he code (i think i know what the issue is but will post it anyway)

ReefAngel.DCPump.UseMemory = false;
ReefAngel.DCPump.SetMode( Lagoon,75,10 );
ReefAngel.DCPump.DaylightChannel = None;
ReefAngel.DCPump.ActinicChannel = None;
rimai
Posts: 12857
Joined: Fri Mar 18, 2011 6:47 pm

Re: Jebao Cables

Post by rimai »

Yeah... I think you already figured, but you need to assign the channels to Sync or AntiSync.
Roberto.
psirex
Posts: 16
Joined: Tue Jun 11, 2013 8:44 am

Re: Jebao Cables

Post by psirex »

Just so I am clear I just need to adjust the Daylight\Actinic channels correct?
Last edited by psirex on Thu May 08, 2014 1:22 pm, edited 1 time in total.
rimai
Posts: 12857
Joined: Fri Mar 18, 2011 6:47 pm

Re: Jebao Cables

Post by rimai »

Correct
Roberto.
Post Reply