4 Mean Well ELN-60-48D dimmable driver for sale.

[Sacohen]

4 Mean Well ELN-60-48D dimmable driver for sale.

Bought for LED project, but I decided to go in a different direction.

3 have never bee opened and used.
1 was opened, and connected for testing purposes.

The driver worked perfectly when I tested my lights, but I'm going to switch them over to Meanwell LDD drivers and PWM control.

Would prefer to sell them all at once to one person, but I will sell them individually.

Bought from Rapid LED for $32 each new.

Price for all 4 including shipping $110

Individual purchase $30 each including shipping.




0 ~ 1.3A current range
24-48V DC Voltage (runs ~8-14 LEDs)
1-10V dimming control
Compatible with most ReefKeeper/Apex systems (make sure your specific system can regulate 0-10V)

Helpful hints on how to properly use your driver
http://www.vinnymarini.com/pictures/rap ... Driver.pdf

Note: A power cord does not come with the driver and will need to be purchased separately.

Mean Well ELN-60 Series Full Specifications
http://www.meanwell.com/search/eln-60/default.htm

PM me for questions or if interested.

[cosmith71]

Why are you going over to the LDD drivers? I'm not familiar with them.

--Colin

[Sacohen]

Much smaller in size.
Can have 1 PS for all 4 drivers.
They will dim to 0 and I believe they are more responsive for storm effects.

This is my board all assembled.


There is a 114 page thread about them on RC, with designs for the PCB and everything you need.

http://www.reefcentral.com/forums/showt ... mming+to+0

[cosmith71]

Neat! Trying not to hijack your thread. Do you have a build thread on this going somewhere?

--Colin

[Sacohen]

I don't. The closest thing is that thread on Reef Central.
I was going to build them, but I bought the stuff from someone who started the project and then went with commercial LED's, so the board I have came to me assembled already.

The more I look at my soldering skills I probably couldn't have done this project myself.

[fatman]

It's not that difficult, I can do it! There is a socket package that you can use under the LDD drivers that allow you to change them easily. I just need to find the Eagle files for the 4 up board with pull down resistors. I have the cam files, but my vendor doesn't use them and I can't figure out how to get them loaded to Seeed Studio or one of the other overseas vendors.

I'm getting ready to change over too.

Fat

[Sacohen]

Will the Gerber files help you.
I found them in the Reef Central thread.

https://code.google.com/p/meanwell-ldd- ... loads/list

[fatman]

Will the Gerber files help you.
I found them in the Reef Central thread.

https://code.google.com/p/meanwell-ldd- ... loads/list

They won't, but the site is worth exploring to see if I can find the Eagle files.

Thanks!

[cosmith71]

New thread so Steve can sell his stuff in peace.

http://forum.reefangel.com/viewtopic.php?f=19&t=4717

--Colin

[fatman]

OOPS, sorry Steve, I didn't mean to hijack the thread. But at least the comments bumped it to the top.

[Sacohen]

Yea. I'm not really thinking they are going to sell, I just thought I'd give it a shot though.
I have them listed on RD, R@R and 2 other forums including Craiglist and no action so far.
It may be my asking price, but these are literally never used except for 1 that I tested with for maybe 5 hours.

[cosmith71]

Did you check on returning them?

[Sacohen]

I haven't but it's I've had them since December. I don't think they would take them back.
I guess it doesn't hurt to try though.

[fatman]

I'm a bit in the same boat with three or four new ones we bought and then change routing on in the middle of the project. I find I can move them on the local club forum when someone has one go out on them. The go, it just takes me 18 months to sell them.

[Sacohen]

I think I sold them on R2R.
Just waiting for payment.

[fatman]

Good for you.

[Sacohen]

Rapid LED said they would take them back for a store credit, but there was nothing I really needed from them.
It's not what I would have liked for them, but it's something.

I figure actual cash is better then a credit if I don't need anything from the shop.