Modification to the Relays

Request new hardware or ideas for the controller
Post Reply
User avatar
Sacohen
Posts: 1833
Joined: Sun Apr 21, 2013 6:25 am
Location: Davie, FL

Modification to the Relays

Post by Sacohen »

I don't know how other feel about this, but adding an LED to each port on the relay to indicate the port is on and working.
Just a little something that I find would make things easier when troubleshooting a problem.
User avatar
joshlawless
Posts: 138
Joined: Thu May 23, 2013 2:52 pm

Re: Modification to the Relays

Post by joshlawless »

Sacohen wrote:I don't know how other feel about this, but adding an LED to each port on the relay to indicate the port is on and working.
Just a little something that I find would make things easier when troubleshooting a problem.
I would very much like this. It would have helped quite a bit while troubleshooting hardware problems (as opposed to plugging in desk lamps to watch for relay changes)
Kungpaoshizi
Posts: 52
Joined: Wed Sep 16, 2015 8:12 am

Re: Modification to the Relays

Post by Kungpaoshizi »

That would be nice, or even a manual switch to each for on/off functionality
Post Reply